[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[K12OSN] Cant get server to find floppy drive



The thin client server is up and running, but for some reason I can't seem
to mount the floppy drive. I tried manually adding /dev/fd0 in fstab because
it wasn't there. I even tried swapping out floppy drives but nothing works.
Any ideas? Below are some outputs (fstab, mtab, dmesg, chkconfig):

***Tried Mounting Floppy***
[root server root]# mount floppy
mount: can't find floppy in /etc/fstab or /etc/mtab

***No Floppy in mnt***
[root server mnt]# ls
cdrom
[root server mnt]#

***/etc/fstab***
[root server root]# cat /etc/fstab
LABEL=/                 /                       ext3    defaults        1 1
none                    /dev/pts                devpts  gid=5,mode=620  0 0
none                    /dev/shm                tmpfs   defaults        0 0
LABEL=/home             /home                   ext3    defaults        1 2
none                    /proc                   proc    defaults        0 0
none                    /sys                    sysfs   defaults        0 0
/dev/sdc2               swap                    swap    defaults        0 0
/dev/cdrom              /mnt/cdrom              udf,iso9660
noauto,owner,kudzu,ro 0 0
/dev/fd0                /mnt/floppy             auto    noauto,owner,kudzu 0
0

***/etc/mtab***
[root server mnt]# cat /etc/mtab
/dev/sdc1 / ext3 rw 0 0
none /proc proc rw 0 0
none /sys sysfs rw 0 0
none /dev/pts devpts rw,gid=5,mode=620 0 0
usbdevfs /proc/bus/usb usbdevfs rw 0 0
none /dev/shm tmpfs rw 0 0
/dev/sda1 /home ext3 rw 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
nfsd /proc/fs/nfsd nfsd rw 0 0


***dmesg output***
[root server mnt]# dmesg |less
Linux version 2.6.8-1.521smp (bhcompile tweety build redhat com) (gcc
version 3.
3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 SMP Mon Aug 16 09:25:06 EDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000040000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
1024MB LOWMEM available.
ACPI: S3 and PAE do not like each other for now, S3 disabled.
found SMP MP-table at 000fb4f0
On node 0 totalpages: 262144
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 258048 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Using APIC driver default
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: INTEL    Product ID: 440BX        APIC at: 0xFEE00000
Processor #0 6:10 APIC version 17
Processor #1 6:10 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 2
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped 4G/4G trampoline to fffeb000.
Initializing CPU#0
CPU 0 irqstacks, hard=023eb000 soft=023cb000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 701.704 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Memory: 1033604k/1048576k available (1896k kernel code, 14236k reserved,
736k da
ta, 176k init, 0k highmem)
Calibrating delay loop... 1384.44 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: After all inits, caps:        0383f3ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Cascades) stepping 01
per-CPU timeslice cutoff: 5855.10 usecs.
task migration cache decay timeout: 6 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000004
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
CPU 1 irqstacks, hard=023ec000 soft=023cc000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1400.83 BogoMIPS
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: After all inits, caps:        0383f3ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Cascades) stepping 01
Total of 2 processors activated (2785.28 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not
conn
ected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 001 01  0    0    0   0   0    1    1    51
 07 001 01  0    0    0   0   0    1    1    59
 08 001 01  0    0    0   0   0    1    1    61
 09 000 00  1    0    0   0   0    0    0    00
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 001 01  0    0    0   0   0    1    1    69
 0d 001 01  0    0    0   0   0    1    1    71
 0e 001 01  0    0    0   0   0    1    1    79
 0f 001 01  0    0    0   0   0    1    1    81
 10 001 01  1    1    0   1   0    1    1    89
 11 001 01  1    1    0   1   0    1    1    91
 12 001 01  1    1    0   1   0    1    1    99
 13 001 01  1    1    0   1   0    1    1    A1
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
Using vector-based indexing
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:18
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:19
IRQ10 -> 0:16
IRQ11 -> 0:17
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 701.0473 MHz.
..... host bus clock speed is 100.0210 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
zapping low mappings.
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 316k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1097355274.363:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9488DB81FF525AA3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
ksign: invalid packet (ctb=00)
Unable to load default keyring: error=74
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440GX Chipset.
agpgart: Maximum main memory to use for agp memory: 942M
agpgart: AGP aperture is 64M @ 0xf8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: NEC CD-ROM DRIVE:273, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hda: ATAPI 4X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Logitech Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP: Hash tables configured (established 131072 bind 43690)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
CPU0:  online
 domain 0: span 00000001
  groups: 00000001
  domain 1: span 00000003
   groups: 00000001 00000002
CPU1:  online
 domain 0: span 00000002
  groups: 00000002
  domain 1: span 00000003
   groups: 00000002 00000001
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

  Vendor: IBM       Model: DGHS18U           Rev: 03B0
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:10:0: Tagged Queuing enabled.  Depth 4
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write through
 sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 10, lun 0
  Vendor: IBM       Model: DGHS18U           Rev: 0350
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:11:0: Tagged Queuing enabled.  Depth 4
SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sdb: drive cache: write through
 sdb: sdb1
Attached scsi disk sdb at scsi0, channel 0, id 11, lun 0
  Vendor: IBM       Model: DCHS09U           Rev: 2727
  Type:   Direct-Access                      ANSI SCSI revision: 02
scsi0:A:12:0: Tagged Queuing enabled.  Depth 4
SCSI device sdc: 17774160 512-byte hdwr sectors (9100 MB)
SCSI device sdc: drive cache: write back
 sdc: sdc1 sdc2
Attached scsi disk sdc at scsi0, channel 0, id 12, lun 0
(scsi0:A:13): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
  Vendor: IBM       Model: DCHS09U           Rev: 2727
  Type:   Direct-Access                      ANSI SCSI revision: 02
scsi0:A:13:0: Tagged Queuing enabled.  Depth 4
SCSI device sdd: 17774160 512-byte hdwr sectors (9100 MB)
SCSI device sdd: drive cache: write back
 sdd: sdd1
Attached scsi disk sdd at scsi0, channel 0, id 13, lun 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 176k freed
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02343560(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 9, io base 0000ef80
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
EXT3 FS on sdc1, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm uk sistina com
cdrom: open failed.
Adding 2047992k swap on /dev/sdc2.  Priority:-1 extents:1
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.14 <tigran veritas com>
microcode: CPU1 updated from revision 0x0 to 0x1, date = 03062000 
microcode: CPU0 updated from revision 0x0 to 0x1, date = 03062000 
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Attached scsi generic sg0 at scsi0, channel 0, id 10, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 11, lun 0,  type 0
Attached scsi generic sg2 at scsi0, channel 0, id 12, lun 0,  type 0
Attached scsi generic sg3 at scsi0, channel 0, id 13, lun 0,  type 0
kudzu: Using deprecated /dev/sg mechanism instead of SG_IO on the actual
device
kudzu: Using deprecated /dev/sg mechanism instead of SG_IO on the actual
device
kudzu: Using deprecated /dev/sg mechanism instead of SG_IO on the actual
device
kudzu: Using deprecated /dev/sg mechanism instead of SG_IO on the actual
device
inserting floppy driver for 2.6.8-1.521smp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xfc1ff000, irq 11, MAC addr 00:A0:C9:99:9C:06
divert: allocating divert_blk for eth1
e100: eth1: e100_probe: addr 0xfc1fe000, irq 5, MAC addr 00:A0:C9:B8:01:69
divert: freeing divert_blk for eth0
divert: freeing divert_blk for eth1
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 304 bytes per conntrack
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xfc1ff000, irq 11, MAC addr 00:A0:C9:99:9C:06
divert: allocating divert_blk for eth1
e100: eth1: e100_probe: addr 0xfc1fe000, irq 5, MAC addr 00:A0:C9:B8:01:69
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
eth0: no IPv6 routers present
eth1: no IPv6 routers present
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
Installing knfsd (copyright (C) 1996 okir monad swb de).
nfsd: last server has exited
nfsd: unexporting all filesystems
rpciod: active tasks at shutdown?!
RPC: failed to contact portmap (errno -5).
(END)


***chkconfig --list***
[root server mnt]# chkconfig --list
smb             0:off   1:off   2:off   3:off   4:off   5:off   6:off
dc_client       0:off   1:off   2:off   3:off   4:off   5:off   6:off
smartd          0:off   1:off   2:on    3:on    4:on    5:off   6:off
bcm5820         0:off   1:off   2:off   3:off   4:off   5:off   6:off
autofs          0:off   1:off   2:off   3:on    4:on    5:on    6:off
kudzu           0:off   1:off   2:off   3:on    4:on    5:on    6:off
sshd            0:off   1:off   2:on    3:on    4:on    5:on    6:off
gpm             0:off   1:off   2:on    3:on    4:on    5:on    6:off
nfs             0:off   1:off   2:on    3:on    4:on    5:off   6:off
squidguard      0:off   1:off   2:off   3:off   4:off   5:off   6:off
cups            0:off   1:off   2:on    3:on    4:on    5:on    6:off
tux             0:off   1:off   2:off   3:off   4:off   5:off   6:off
snmpd           0:off   1:off   2:off   3:off   4:off   5:off   6:off
httpd           0:off   1:off   2:off   3:off   4:off   5:off   6:off
microcode_ctl   0:off   1:off   2:off   3:on    4:on    5:on    6:off
psacct          0:off   1:off   2:off   3:off   4:off   5:off   6:off
snmptrapd       0:off   1:off   2:off   3:off   4:off   5:off   6:off
ntpd            0:off   1:off   2:off   3:on    4:off   5:on    6:off
rpcidmapd       0:on    1:off   2:off   3:on    4:off   5:off   6:on
readahead_early 0:off   1:off   2:off   3:off   4:off   5:on    6:off
apmd            0:off   1:off   2:on    3:on    4:on    5:on    6:off
yum             0:off   1:off   2:off   3:off   4:off   5:off   6:off
nfslock         0:off   1:off   2:on    3:on    4:on    5:off   6:off
irda            0:off   1:off   2:off   3:off   4:off   5:off   6:off
rpcgssd         0:on    1:off   2:off   3:on    4:off   5:on    6:on
xinetd          0:off   1:off   2:on    3:on    4:on    5:on    6:off
portmap         0:off   1:off   2:on    3:on    4:on    5:off   6:off
acpid           0:off   1:off   2:off   3:on    4:on    5:on    6:off
mdmpd           0:off   1:off   2:on    3:on    4:on    5:on    6:off
isdn            0:off   1:off   2:on    3:on    4:on    5:off   6:off
transparent-proxying    0:off   1:off   2:off   3:off   4:off   5:off
6:off
aep1000         0:off   1:off   2:off   3:off   4:off   5:off   6:off
pcmcia          0:off   1:off   2:on    3:on    4:on    5:off   6:off
xfs             0:off   1:off   2:on    3:on    4:on    5:on    6:off
readahead       0:off   1:off   2:off   3:off   4:off   5:on    6:off
dc_server       0:off   1:off   2:off   3:off   4:off   5:off   6:off
squid           0:off   1:off   2:off   3:off   4:off   5:on    6:off
rhnsd           0:off   1:off   2:off   3:on    4:on    5:on    6:off
nat             0:off   1:off   2:on    3:on    4:on    5:on    6:off
random          0:off   1:off   2:on    3:on    4:on    5:on    6:off
dhcpd           0:off   1:off   2:on    3:on    4:on    5:on    6:off
dhcrelay        0:off   1:off   2:off   3:off   4:off   5:off   6:off
network         0:off   1:off   2:on    3:on    4:on    5:on    6:off
mdmonitor       0:off   1:off   2:on    3:on    4:on    5:on    6:off
anacron         0:off   1:off   2:on    3:on    4:on    5:on    6:off
named           0:off   1:off   2:on    3:on    4:on    5:on    6:off
sendmail        0:off   1:off   2:on    3:on    4:on    5:on    6:off
crond           0:off   1:off   2:on    3:on    4:on    5:on    6:off
netdump         0:off   1:off   2:off   3:off   4:off   5:off   6:off
netfs           0:off   1:off   2:off   3:on    4:on    5:on    6:off
verynice.init   0:off   1:off   2:off   3:on    4:on    5:on    6:off
vncserver       0:off   1:off   2:off   3:off   4:off   5:on    6:off
atd             0:off   1:off   2:off   3:on    4:on    5:on    6:off
saslauthd       0:off   1:off   2:off   3:off   4:off   5:off   6:off
rpcsvcgssd      0:on    1:off   2:off   3:on    4:off   5:off   6:on
rawdevices      0:off   1:off   2:off   3:on    4:on    5:on    6:off
syslog          0:off   1:off   2:on    3:on    4:on    5:on    6:off
iptables        0:off   1:off   2:on    3:on    4:on    5:on    6:off
irqbalance      0:off   1:off   2:off   3:on    4:on    5:on    6:off
cpuspeed        0:off   1:on    2:on    3:on    4:on    5:on    6:off
netplugd        0:off   1:off   2:off   3:off   4:off   5:off   6:off
lisa            0:off   1:off   2:off   3:off   4:off   5:off   6:off
messagebus      0:off   1:off   2:off   3:on    4:on    5:on    6:off
xinetd based services:
        time-udp:       off
        daytime-udp:    off
        services:       off
        chargen:        off
        chargen-udp:    off
        echo-udp:       off
        cups-lpd:       off
        tftp:   on
        rsync:  off
        sgi_fam:        off
        time:   off
        vnc:    on
        daytime:        off
        ktalk:  off
        echo:   off

Thanks!

Wilson




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]