[K12OSN] Printing from a thin client: the improved version.
Petre Scheie
petre at maltzen.net
Fri Aug 19 18:01:22 UTC 2005
Nobody seems to be answering your original question: how to setup local printers. See
Chapter 5 of the LTSP docs at
http://www.ltsp.org/documentation/ltsp-4.1/ltsp-4.1.3-en.html#AEN700
It's pretty simple. As a similar alternative, if you have spare machines lying around,
you could make them into print servers; that way access to the printer isn't dependent
on the client being turned on.
Petre
jconlon1 at elp.rr.com wrote:
> If we could afford to buy jetdirect devices we would be able to buy
> newer printers. We are doing with what we have and what we can make
> work. Any other suggestions?
> Bye
> Pat
>
> ----- Original Message -----
> From: Joe Guenther <jguenther at chinooksedge.ab.ca>
> Date: Thursday, August 18, 2005 10:32 pm
> Subject: Re: [K12OSN] Printing from a thin client: the improved version.
>
>
>>IHMO, I would seriously consider buying JetDirect network adapters
>>for
>>them and then printing directly to them via IP printing. From my
>>experience printing to PCL printers is very much more CPU intensive
>>than
>>printing to postscript printers, but seeing as these are HP 4+
>>printers
>>and not 4 M+ you will have to take the extra CPU hit and
>>considerably
>>slower printing times. IHMO the best "improved version" of printing
>>is
>>to print direct to a Postscript printer via IP address.
>>
>>I cannot speak about remote printers - if that would reduce the CPU
>>drag
>>of the PCL printers ... but in terms of simplicity the JetDirect
>>cards
>>are the way to go. Maybe that is not quite the advice you were
>>looking
>>for ....
>>
>>Joe Guenther
>>
>>John P. Conlon wrote:
>>
>>
>>>At my school we have several parallel port HP-4 Plus laser
>>
>>printers. We
>>
>>>want to connect them to thin clients in various classrooms.
>>>1. In the printer setup utility in root what selections do we
>>
>>need to
>>
>>>make to cause the printer to work? Particularly what path
>>
>>information
>>
>>>do I use, IP address, Mac address or what?
>>>2. Do I need to make any entery in the lts.conf file?
>>>. Do any files other than printcap need to be edited? Which files
>>
>>and> what changes need to be made in those files?
>>
>>>Any and all information would be greatly appreciated.
>>>Thanks
>>>Pat
>>>
>>>_______________________________________________
>>>K12OSN mailing list
>>>K12OSN at redhat.com
>>>https://www.redhat.com/mailman/listinfo/k12osn
>>>For more info see <http://www.k12os.org>
>>>
>>>_______________________________________________
>>>K12OSN mailing list
>>>K12OSN at redhat.com
>>>https://www.redhat.com/mailman/listinfo/k12osn
>>>For more info see <http://www.k12os.org>
>>>
>>>!DSPAM:43051e30119635861121188!
>>>
>>
>>_______________________________________________
>>K12OSN mailing list
>>K12OSN at redhat.com
>>https://www.redhat.com/mailman/listinfo/k12osn
>>For more info see <http://www.k12os.org>
>>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>
More information about the K12OSN
mailing list