[K12OSN] How do i enable XDMCP in K12ltsp 4.2.0 ?

[cliebow at downeast.net]

are you having trouble with xdmcp: if so run netstat -anp|grep 177.if it is
not listening check kdmrc for port=177 and enabled=true..then check Xacess
to be sure there is an uncommented line with *

probably right answer to wrong question but...

> Hi Eric !
> 
> I have tried 
> 
> Xserver = vesa
> Xserver = mga
> Xserver = vga
> Xserver = XF86_SVGA
> 
> and nothing works !
> 
> I even tried another machine as client 
> and went back to 
> Xserver = auto 
> 
> and that didn't work either.
> 
> I'll give it another try tomorrow evening 
> 
> and by the way ltspadmin reports that XDMCP is running 
> the only thing it say no on is if it is enabled, thats no, 
> and it is using none of the windowhanders it found GDM,KDM and XDM !
> 
> perhaps i should testrun the client with knoppix, just to se if that works !
> 
>  /Kjell 
> 
> 
> 
> ----- Original Message -----
> From: "Eric Harrison" <eharrison at mail.mesd.k12.or.us>
> To: "Support list for opensource software in schools." <k12osn at redhat.com>
> Subject: Re: [K12OSN] How do i enable XDMCP in K12ltsp 4.2.0 ?
> Date: Mon, 28 Mar 2005 21:37:58 -0800 (PST)
> 
> > 
> > 
> > The increased detail helps quite a bit. Thanks Kjell!
> > 
> > Since the client hangs at this line:
> > 
> > > (++) using config file "/tmp/ XF86Config.1"(
> > 
> > my first guess would be a video driver problem is crashing the
> > client. Try using the vesa driver and see if the problem persists.
> > Edit /opt/ltsp/i386/etc/lts.conf and change:
> > 
> >       XSERVER = auto to:
> >       XSERVER = vesa
> > 
> > -Eric
> > 
> > On Tue, 29 Mar 2005, Kjell Andersson wrote:
> > 
> > > It is the standard setup but this time i inactivated the firewall 
> > > ( i have freesco )
> > > and selinux. I have two network cards one 3com 905 TX and one 
> > > realtec clone 8139D.
> > > I am using the 192.168.0.254/ 255.255.255.0 adress for the client 
> > > and DHCP fo the other one.
> > > This time i get as far as
> > >
> > > Building the /tmp/XF86Config-4 file
> > > Release date 18 december 2003
> > > X-protocol Version 11 revision 0 release 6.7
> > > Build Operating System linux (non) 2.4.25-ltsp-2 #1 sat Nov 13 
> > > 00:28:51 UTC 2004 i 486
> > >         Before reporting problems, check http://wikwi.X.org
> > >         to make sure that you have the latest version.
> > > Module loader present
> > > Markers: (--) probed, (**) from config file, (==) default setting,
> > > ( this goes on to the lie saying )
> > > (++) using config file "/tmp/ XF86Config.1"(
> > >
> > > (and the client has hung)
> > > this is as far i have gotten.
> > > the client is a AMD 486 120Mhz with 130 Mb RAM and a realtec network card
> > > and a Matrox Mystique grahpics card.
> > > I have tried a lot of different X-servers besides the Auto 
> > > setting but nothing works !
> > > I am clueless apart from the fact that the client hangs when 
> > > trying to build the X-config
> > > or some actions close to that.
> > >
> > > Regards Kjell
> > 
> > _______________________________________________
> > K12OSN mailing list
> > K12OSN at redhat.com
> > https://www.redhat.com/mailman/listinfo/k12osn
> > For more info see <http://www.k12os.org>
> 
> -- 
> ___________________________________________________________
> Sign-up for Ads Free at Mail.com
> http://promo.mail.com/adsfreejump.htm
> 
> 
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
> 


---------------------------------------------
This message was sent from Downeast.Net.
http://ellsworthme.com/