[K12OSN] Using a terminal as a Jetdirect device
jconlon1 at elp.rr.com
jconlon1 at elp.rr.com
Mon Sep 12 17:20:00 UTC 2005
This is the entery from the lts.conf file
[00:48:54:67:3a:64]
PRINTER_0_DEVICE = /dev/lp0
PRINTER_0_TYPE = P
This is the section of the dhcpd.conf file
# example configurations for specifying specific kernels to specific clients
group {
use-host-decl-names on;
option log-servers 192.168.0.254;
host ws001 {
hardware ethernet 00:48:54:67:3a:64;
fixed-address 192.168.0.1;
}
My guess is that there is something in the dhcpd.conf file that I
haven't done.
Thanks
Pat
----- Original Message -----
From: Jim McQuillan <jam at mcquil.com>
Date: Monday, September 12, 2005 7:50 am
Subject: Re: [K12OSN] Using a terminal as a Jetdirect device
>
>
> On Mon, 12 Sep 2005 jconlon1 at elp.rr.com wrote:
>
> > I am using FC4.4 with 2.4.26-ltsp-3.
> > After some suggested testing it appears that lp_server is not
> running.> When I ran ps -elf from a bash prompt on the terminal
> that has the
> > printer lp_server was not in the list.
> > I tried getltscfg PRINTER_0_DEVICE and got no response
> > I tried getltscfg PRINTER_0_TYPE and got no response. I also
> tried this
> > with _1_ based on the suggestion that there is or was an
> identification> problem.
>
> Maybe the terminal doesn't know its own hostname. Which means that
> getltscfg won't know which section of the lts.conf file to look at. It
> will only get the [Default] entries.
>
> If you are using dynamic addresses from a pool of addresses, then the
> client won't get a hostname.
>
> if you are doing static entries in dhcpd.conf, then the client should
> get a hostname. make sure you have the line 'use-host-decl-names
> on' in
> the dhcpd.conf file.
>
> Also, in the lts.conf file, you can use MAC addresses for the names of
> the sections, instead of hostnames.
>
> Take a look at:
>
> http://wiki.ltsp.org/twiki/bin/view/Ltsp/LtsConf
>
> for more info.
>
>
> >
> > How do I determine if lp_server is running or not and if it isn't
> how do
> > I get it started?
>
> on the client, at a bash prompt, type: ps
> see what processes are running. there shouldn't be very many. See if
> lp_server is one of them.
>
>
> If you still can't get it working after all this, then send me a
> copy of
> your lts.conf file, and your dhcpd.conf file.
>
> Jim McQuillan
> jam at Ltsp.org
>
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>
More information about the K12OSN
mailing list