[K12OSN] PXE boot stopped working after upgrade to 5.0, now new problem

[Julius Szelagiewicz]

>
>
> Julius Szelagiewicz wrote:
>>
>>
>> Jim, installed as an upgrade. good probability of missing modules - usb
>> printer definitions don't create accessible queues either.
>> kernel version: vmlinuz-2.6.16-2.k12ltsp.5.0.0
>>
>> the only module shown by lsmod is "via_rhine"
>>
>
> Yep, sounds like you don't have the modules tree that goes with that
> kernel.  the via_rhine driver is for the network card, and that comes
> from the initramfs.
>
> On the terminal, in shell mode, do this:   cat /proc/version
> With that, you can see the internal name of the kernel.  then, check in
> /opt/ltsp/i386/lib/modules, and you should have a module tree with that
> name.
>
> if not, then i'm suspecting that there's something wrong with the
> upgrade process.
>
Jim,
 I'll do the test tomorrow and report - I'm returning from the remote
location now. The workaround was to use hp jetdirects :-)
Thanks, julius