[K12OSN] Servers, K12LTSP, and workstation numbers, etc.
Petre Scheie
petre at maltzen.net
Mon Jul 24 16:12:50 UTC 2006
Huck-
Have you looked at putting multiple gig-e cards in the server? You may need to break
things into multiple subnets for it to work (or perhaps not). There was some discussion
on the list a couple years ago about using multiple NICs in the server, but I don't
recall what the consensus was.
Petre
Huck wrote:
> Doug,
>
> your bottleneck on that is going to happen at the network level more
> likely...I have dual Xeon 3.0ghz with 4 gig of ram...
> with 35 terminals all going at the same time...it gets slow on a gig-e
> backbone...(with less than 40% CPU usage and has never touched swap file
> for memory as far as I can tell when monitoring with 'top')
>
> Perhaps I'm doing something wrong, but the math seems correct..
>
> 35*75(approximately) == around to 2 gigs of used bandwidth.
> perhaps there is some method of load balancing I can use that I haven't
> tried yet...(an application server, 2 k12ltsp servers...)
>
> I am sure 'scalability' is a larger issue with public schools and
> districts...luckily we're a small 1 site school with only about 230
> students and the LTSP network is merely to augment the Mac and PC labs.
>
> --Huck
> Doug Simpson wrote:
>> Hello.
>>
>> I finally have got my Superintendent excited about being able to use
>> older hardware to save monty and use K12LTSP for thos older computers
>> to make them usable again in Internet/Research/Writing labs in our
>> schools.
>>
>> I have several servers that have K12LTSP installed and ready to go,
>> thinking I could run many workstations from them.
>>
>> But when I read articles that say a district has 32 servers to deploy
>> K12LTSP, I am thninking I am missing something because where is the
>> cost savings in that, forst of all, and that means server updates and
>> everything will have to be done on all those servers.
>>
>> Our Supt. is a "Bottom Dollar" kind of guy and he doesn't look at TCO
>> so much as what it will cost to "get it in the door".
>>
>> Say I have a server with 12GB RAM, Almost a terabyte (sp?) of SCSI
>> hard drive in Raid5 and Gigabit NICs. Realistically, how many
>> workstations can I hang off there using Gnome, Mozilla, OOo, and
>> several other apps on intermittent basis and see usable performance?
>>
>> Also, I have one server, running FC1 with K12LTSP and it serves DHCP
>> IP addresses, but I want another server to handle the terminals.
>>
>> I added the next-server line to dhcpd.conf, but it still looks to the
>> FC1 server to boot from. The other (preferred server) is FC3, K12LTSP
>> and I think it is set up correctly.
>>
>> What can I look for to make the workstations boot and run from the FC3
>> server with DHCP being handled by the FC1 server?
>>
>> Thanks!
>>
>> Doug Simpson
>> Technology Specialist
>> DeQueen Public Schools
>> DeQueen, AR 71832
>> simpsond at leopards.k12.ar.us
>> Tux for President!
>>
>> _______________________________________________
>> K12OSN mailing list
>> K12OSN at redhat.com
>> https://www.redhat.com/mailman/listinfo/k12osn
>> For more info see <http://www.k12os.org>
>>
>>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>
More information about the K12OSN
mailing list