[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] root-path or dhcp issue but only after 2nd client connection



On Monday 30 October 2006 12:15, Les Mikesell wrote:
> On Sat, 2006-10-28 at 10:48 -0400, marrandy wrote:
> > Oh...the Subject should read   "root-path or dhcp issue but only after
> > rebboting client second time"
> >
> > Otherwise, it implies it happens when I add a second client.  I only have
> > one client and it's the second and subsequent reboots of that single
> > client.
> >
> > Hope that's clearer.
>
> Has it only worked once, ever?  Or does the client work again after
> waiting some amount of time?   Do you have other clients to test?
> Perhaps it is a bios issue on this client - I've seen some old Dells
> that would fail randomly until I did a flash upgrade to the bios.

Hi les.

I'm sorry but I've reformatted the hard drive for something else at the 
moment.  I will have to buy another H/D and come back to the issue.

I thought I had been pretty clear but it looks like there is some  'wiggle 
room'  in what I said.

The k12 test server has two cards.  One is connected to a 192.168.1.x subnet.

As I said, I did a ping yahoo.com and pulled the cable from the k12 server and 
the ping stopped.  This means the k12 server is now isolated from other 
networks.

The other ethernet card goes to a 4-way switch siting on top of the k12 
server.

A second cable comes from the 4-way switch to a pxe terminal.

It gives the message, only after the second boot from the install.

I'm redoing the network (luckily, it's small) and moving everything to static 
and will start over, probably next week when I get another H/D.

wash, rinse, do again ;-)




-- 
Regards...Martin


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]