[K12OSN] Networking configuration

[Jeremy Schubert]

I used to have three clients connected to by dlink device that acts as a
switch, dhcp server and proxy server (shares the internet, but I guess not
exactly a proxy server, anyway...)  Client computers gateway is set to the
ip of the dlink device.   The dlink device is connected to the cable modem.

 

Now I have introduced my CentOS ltsp server.  Currently I have eth0 and eth1
plugged into the dlink device.

 

So, do I have to plug eth0 into my cable modem and eth1 into my switch?  And
then the gateway for my client computers would be the ltsp server instead of
the dlink device?  

Also, during the ltsp install, the eth0 was designated x.x.x.254 and eth1
dhcp.  Currently I connect to the server using putty (ssh).  Is there a cmd
line I can use to change the eth1 to static and modify both cards address?

 

Thanks

 

Jeremy Schubert

The two basic principles of Windows system administration:
For minor problems, reboot 

For major problems, reinstall 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/k12osn/attachments/20080616/59c7d666/attachment.htm>