Fwd: Problem with mkiso - Solved
Edgar Chillón 'Chillux'
e_chillon at yahoo.com.mx
Sat Oct 16 18:28:24 UTC 2004
Thanks for the recomendation men !
Regards
--- Greg Morgan <drkludge at cox.net> escribió:
> Edgar,
>
> Anytime you see a 'Violación de segmento' or
> 'segmentation fault' that
> is the point where you have to begin your trouble
> shooting. If you
> would have tried FC1 you may have experienced the
> same error. It may be
> helpful for you to print out the documentation
> located here
>
http://rau.homedns.org/twiki/bin/view/Anaconda/AnacondaDocumentationProject
>
> or here
>
http://www.linuxworks.com.au/redhat-installer-howto.html
> or
> paste the steps in a file. As you perform the steps
> place a check mark
> by each step or sub-step. This will help you
> remember where you are if
> you are interrupted in the process or help you
> remember the next thing
> to do. If a step fails you must resolve it before
> proceeding. This is
> exactly what I did with the 'Input/output error'
> messages. When I
> looked at my copy target directory, it did not have
> the isolinux
> directory for example. So if your start using this
> type of technique,
> you will be more successful. You will also enjoy
> what you can do with
> the open source tools.
>
> Greg
>
> Edgar Chillón 'Chillux' wrote:
> > Men, it works !!! Really truly thanks !!!!!
> >
> > The error was that I forgot this step:
> >
> > ind /home/fdrive/fc2iso -name TRANS.TBL -exec rm
> -f
> > {} \;
> >
> > Thanks !
> > --- Greg Morgan escribió:
> >
> >>Edgar,
> >>
> >>I was bored tonight so I thought I would fool
> around
> >>with your issue. If
> >>you are planning to make changes to the CD set,
> then
> >>you will want to go
> >>through and perform all the steps as described in
> >>the documentation.
> >>The following steps bypass much of the
> >>documentation.
> >>
> >>I tried the steps on a real FC2 cd that I
> installed
> >>from. I received
> >>the following errors. They appear to be fatal to
> >>me:
> >>cp: reading `/mnt/cdrom/Fedora/base/comps.rpm':
> >>Input/output error
> >>cp: reading `/mnt/cdrom/Fedora/base/hdlist':
> >>Input/output error
> >>cp: reading `/mnt/cdrom/Fedora/base/hdlist2':
> >>Input/output error
> >>Moreover, not all of the directories were copied
> >>from the cd into my
> >>working directory.
> >>
> >>Since I still had the ISO file that I used to
> create
> >>the CD with I tried
> >>these steps. They are a little different from the
> >>two sites listed
> >>below but have the same intent. You will have to
> >>adapt the file paths
> >>to your system. (The pathing is for a samba/NFS
> >>server.)
> >># Switch to root
> >>su - root
> >># Go to the ISO directory location.
> >>cd /home/ddrive/fedoracore2
> >># Mount the ISO file.
> >>mount -t iso9660 -o loop FC2-i386-disc1.iso
> >>/mnt/cdrom
> >>#Make a set of working directories
> >>mkdir -p /home/fdrive/fc2iso
> >>mkdir -p /home/fdrive/fc2iso/i386
> >># Copy the files from the CD/ISO.
> >>cp -a /mnt/cdrom/* /home/fdrive/fc2iso/i386
> >>cp /mnt/cdrom/.discinfo /home/fdrive/fc2iso/i386
> >># Clean up the original cd TRANS.TBL files.
> >>find /home/fdrive/fc2iso -name TRANS.TBL -exec rm
> -f
> >>{} \;
> >># Go to the location of disc 1 files.
> >>cd /home/fdrive/fc2iso/i386
> >># Make sure the /home/fdrive/fc2iso/i386 directory
> >>has
> >># the same files as the /mnt/cdrom directory .
> >>ls -l
> >># Make sure that I create the iso file in the
> >>directory
> >># above the directory containing the files in the
> >>iso.
> >>cd /home/fdrive/fc2iso
> >># Create the iso. Note the \ has to be the last
> >>character
> >># on the line. I did this for readability on my
> >>part.
> >>mkisofs -b isolinux/isolinux.bin \
> >>-c isolinux/boot.cat -J -p "chillux at mycompany.com"
> \
> >>-V "Fedora Core 2 with updates disc1" \
> >>-r -T -v -A "Fedora Core Linux/i386 2" \
> >>-o fedoracore2-disc1.iso -no-emul-boot \
> >>-boot-load-size 4 -boot-info-table -l i386
> >>
> >>The final output showed:
> >>...
> >> 99.18% done, estimate finish Wed Oct 13 21:52:39
> >>2004
> >>Total translation table size: 131221
> >>Total rockridge attributes bytes: 54553
> >>Total directory bytes: 96256
> >>Path table size(bytes): 94
> >>Done with: The File(s) Block(s)
> >>332482
> >>Writing: Ending Padblock Start Block
> >>332589
> >>Done with: Ending Padblock Block(s) 150
> >>Max brk space used 8e000
> >>332739 extents written (649 MB)
> >>
> >># I am done with the mounted ISO file so unmount
> the
> >>file.
> >>umount /mnt/cdrom
> >>
> >>My version of mkisofs is 2.01a27.
> >>
> >>I hope this helps,
> >>Greg
> >>
> >>Edgar Chillón 'Chillux' wrote:
> >>
> >>>Sooo ? what do I have to do ? I copyed the disc 1
> >>>again and I have the same problem !!!!
> >>>
> >>>Any ideas ? or I will have to go back to fedora
> >>
> >>core 1
> >>
> >>>?
> >>>
> >>>Regards.
> >>>
> >>> --- Edgar Chillón 'Chillux'
> >>
> >><e_chillon at yahoo.com.mx>
> >>
> >>>escribió:
> >>>
> >>>
> >>>>I did it as the manual said:
> >>>>
> >>>>cp -R /mnt/cdrom/* /mnt/fedora-custom
> >>>>cp /mnt/cdrom/.discinfo /mnt/fedora-custom
> >>>>
> >>>>Then I tryed to create the iso but it send me
> that
> >>>>error. I thoungh it was a disk problem, I tryed
> in
> >>>>other disk and the problem is the same ... I
> don't
> >>>>know how to do, I've tryed to find some of this
> in
> >>>>google but I didnt find anything ...
> >>>>
> >>>>Please, some body help ..
> >>>>
> >>>>
> >>>>--- Greg Morgan escribió:
> >>>>
> >>>>
> >>>>>Edgar Chillón 'Chillux' wrote:
> >>>>>
> >>>>>
> >>>>>>Can some body explain me what do I have this
> >>>>>
> >>>>>problem:
> >>>>>
> >>>>>Edgar
> >>>>>
> >>>>>The clue may be in this statement
> >>>>>
> >>>>>>I am occuping the Fedora Core 2, I didnt
> >>
> >>change
> >>
> >>>>>>anything, I just simple copy the first disk
> >>
> >>and
> >>
> >>>>>try to
> >>>>>
> >>>>>>make it iso but I didnt work ...
> >>>>>
> >>>>>How did you "copy" the first disk? When
> >>
> >>following
> >>
> >>>>>these instructions
> >>>>>
> >>>>
> >
>
http://rau.homedns.org/twiki/bin/view/Anaconda/PreparingTheBuildEnvironment,
> >
> >>>>>did you perform steps 1, 2, 3--just for CD ONE,
> >>>>
> >>>>and
> >>>>
> >>>>
> >>>>>7? I point this out
> >>>>>because of the segmentation fault during the
> >>>>>directory tree writing
> >>>>>step, "> Writing: Directory tree"
> >>>>>
> >>>>>
> >>>>>
> >>>>>>[root at chillux fedora-custom]# mkisofs -b
> >>>>>>isolinux/isolinux.bin -c isolinux/boot.cat -J
> -p
> >>>>>>"chillux at mycompany.com" -V "Fedora Core 2
> with
> >>>>>>updates disc1" -r -T -v -A "Fedora Core
> >>>>
> >>>>Linux/i386
> >>>>
> >>>>
> >>>>>2"
> >>>>>
> >>>>>
> >>>>>>-o fedoracore2-disc1.iso -no-emul-boot
> >>>>>
> >>>>>-boot-load-size
> >>>>>
> >>>>>
> >>>>>>4 -boot-info-table -l i386
> >>>>>
> >>>>>Your mkisofs options look good based on
> >>>>>
> >>>>
> >
>
http://www.linuxworks.com.au/redhat-installer-howto.html#s8
> >
> >>>>>and
> >>>>>
> >>>>
> >
>
http://rau.homedns.org/twiki/bin/view/Anaconda/CustomizingFedoraCore.
> >
> >>>>>>INFO: UTF-8 character encoding detected by
> >>>>>
> >>>>>locale
> >>>>>
> >>>>>
> >>>>>>settings.
> >>>>>> Assuming UTF-8 encoded filenames on
> >>>>
> >>>>source
> >>>>
> >>>>
> >>>>>>filesystem,
> >>>>>> use -input-charset to override.
> >>>>>>mkisofs 2.01 (i686-pc-linux-gnu)
> >>>>>>Scanning i386
> >>>>>>Scanning i386/Fedora
> >>>>>>Scanning i386/Fedora/base
> >>>>>>Scanning i386/Fedora/rpms
> >>>>>>Scanning i386/images
> >>>>>>Scanning i386/images/pxeboot
> >>>>>>Scanning i386/isolinux
> >>>>>>Excluded by match: i386/isolinux/boot.cat
> >>>>>>Using SYSTEM_CONFIG_SECURITYLEVEL000.;1 for
> >>>>>>
> >>>>>
> >
>
i386/Fedora/rpms/system-config-securitylevel-tui-1.3.12-1.i386.rpm
> >
>
>>>>>>(system-config-securitylevel-1.3.12-1.i386.rpm)
> >>>>>>Writing: Initial Padblock
>
> >>>>
> >>>>
> >>>>
> >>>>>>Start Block 0
> >>>>>>Done with: Initial Padblock
>
> >>>>
> >>>>
> >>>>
> >>>>>>Block(s) 16
> >>>>>>Writing: Primary Volume Descriptor
>
> >>>>
> >>>>
> >>>>
> >>>>>>Start Block 16
> >>>>>>Done with: Primary Volume Descriptor
>
> >>>>
> >>>>
> >>>>
> >>>>>>Block(s) 1
> >>>>>>Writing: Eltorito Volume Descriptor
>
> >>>>
> >>>>
> >>>>
> >>>>>>Start Block 17
> >>>>>>Size of boot image is 4 sectors -> No
> emulation
> >>>>>>Done with: Eltorito Volume Descriptor
>
> >>>>
> >>>>
> >>>>
> >>>>>>Block(s) 1
> >>>>>>Writing: Joliet Volume Descriptor
>
> >>>>
> >>>>
> >>>>
> >>>>>>Start Block 18
> >>>>>>Done with: Joliet Volume Descriptor
>
> >>>>
> >>>>
> >>>>
> >>>>>>Block(s) 1
> >>>>>>Writing: End Volume Descriptor
>
> >>>>
> >>>>
> >>>>
> >>>>>>Start Block 19
> >>>>>>Done with: End Volume Descriptor
>
> >>>>
> >>>>
> >>>>
> >>>>>>Block(s) 1
> >>>>>>Writing: Version block
>
> >>>>
> >>>>
> >>>>
> >>>>>>Start Block 20
> >>>>>>Done with: Version block
>
> >>>>
> >>>>
> >>>>
> >>>>>>Block(s) 1
> >>>>>>Writing: Path table
>
> >>>>
> >>>>
> >>>>
> >>>>>>Start Block 21
> >>>>>>Done with: Path table
>
> >>>>
> >>>>
> >>>>
> >>>>>>Block(s) 4
> >>>>>>Writing: Joliet path table
>
> >>>>
> >>>>
> >>>>
> >>>>>>Start Block 25
> >>>>>>Done with: Joliet path table
>
> >>>>
> >>>>
> >>>>
> >>>>>>Block(s) 4
> >>>>>>Writing: Directory tree
>
> >>>>
> >>>>
> >>>>
> >>>>>>Start Block 29
> >>>>>>Violación de segmento
> >>>>>
> >>>>>Why the fault here?
> >>>>>
> >>>>>
> >>>>>
> >>>>>>I tried the same with this:
> >>>>>>mkisofs -J -p "user at mycompany.com" -P "Red
> Hat"
> >>>>
> >>>>-r
> >>>>
> >>>>
> >>>>>-T
> >>>>>
> >>>>>
> >>>>>>-V "Fedora Core 1 with updates disc2" -v -A
> >>>>>
> >>>>>"Fedora
> >>>>>
> >>>>>
> >>>>>>Core Linux/i386 1" -o fedoracore1-disc2.iso
> i386
> >>>>>>but I need the first image bootable !!!
> >>>>>>
> >>>>>>I am occuping the Fedora Core 2, I didnt
> change
> >>>>>>anything, I just simple copy the first disk
> and
> >>>>>
> >>>>>try to
> >>>>>
> >>>>>
> >>>>>>make it iso but I didnt work ...
> >>>>>>
> >>>>>>Any idea ?
> >>>>>
>
> _______________________________________________
> Kickstart-list mailing list
> Kickstart-list at redhat.com
>
https://www.redhat.com/mailman/listinfo/kickstart-list
>
=====
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Edgar Alberto Chillón Escárcega
Security Cunsultant - Pfizer OS
Mobile: 04455-1951-9194
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
PublicKeyID: 0x584CF620 Type: DH/DSS
FingerPrint: 1EDE EF26 C6AA 17DC 1A59 97C8 5270 1942 584C F620
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
_________________________________________________________
Do You Yahoo!?
La mejor conexión a internet y 25MB extra a tu correo por $100 al mes. http://net.yahoo.com.mx
More information about the Kickstart-list
mailing list