[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Out of Disk Space !!



Installing only bare minimum system, to act as gateway and proxy server.
All the partitions are correctly  formatted.

I am using stripped down, buildinstall which only updates, initrd.img
and not the other files.

Since building stage2.img using buildinstall, requires lot of other
packages to be in the
install tree, for X and others, which i dont' want to include, as it
is for proxy server
and very small image.

And what kind of drivers ???


On Tue, 08 Feb 2005 10:16:05 -0600, Peter Eisch <peter boku net> wrote:
> 
> You probably don't have drivers for that particular kernel that you are now
> booting from in the stage2.img.  Whatever you did to update the boot
> initrd.img, also do to the stage2.img.
> 
> peter
> 
> On 2/8/05 6:18 AM, "Jaswinder Singh Kohli" <jskohli gmail com> wrote:
> 
> > Hi,
> >
> > I am getting this error while installation, using the ks.cfg which
> > partitions the drive into
> > three partitions, /      = 1 G
> >                       swap = 1 G
> >                       /var  =  rest of space ( 30 + G)
> >
> > The cd image that i built had modified stage2.img, ( took care of .buildstamp)
> > bootdisks upgraded to kernel 2.6.10...,
> > Only Modified isolinux/initrd.img is used, rest of the files like,
> > stage2.img and hdstg2.img
> > are just repackaged version of what were on Original FC3 Iso's, only
> > changed .buildstamp
> >
> > Now when i booot that CD, the boots up, detects hardware, anaconda starts X
> > The partitions are created and formatted, but then the Install ends
> > with a message.
> >
> > "An error occured while transfering install image to your harddrive .
> > You are probably
> > out of disk space"
> >
> > Where as when i perform fdisk -l on tty2,  which shows, all the
> > partitions were created
> > and also on console 6 the formatting was successful and hence lot of
> > space is there.
> >
> > On tty3, the detailed error message is as follows...
> >
> > Error transfering stage2.img: [Errno 2] No such file of directory:
> >   '/mnt/sysimage/proc/rhinstall-stage2.img'
> >
> > I did a search on google, and archives, came up with no results.
> >
> > Can any one tell me what i am missing or doing wrong and why it is
> > trying to copy
> > rhinstall-stage2.img from some proc fs instead of stage2.img from CD.
> >
> > I am stuck at this point for  too long now, any Pointers, any ideas,
> > will be helpful, that can
> > get me going in forward direction.
> >
> > Thanks....
> 
> _______________________________________________
> Kickstart-list mailing list
> Kickstart-list redhat com
> https://www.redhat.com/mailman/listinfo/kickstart-list
> 


-- 
Regards
JSK
jskohli (AT) gmail (DOT) com


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]