[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: initrd.img module loading



In case it's not immediately apparent, with respect to the OS itself,
you would use '--ondisk sdb' in your partition entries.

-Ed


On Tue, 2005-02-08 at 10:58, Ed Brown wrote:
> The --driveorder option won't change the drive letter assignments, but
> it will change the drive that grub is installed to.  Isn't that what you
> are after?  In your case, you probably want:
> 
> bootloader --driveorder=sdb,sda --location=mbr
> 
> -Ed
> 
> 
> On Tue, 2005-02-08 at 10:53, Ronald Reed wrote:
> > Yes, the aacraid device get set to /dev/sdb. The accraid device is a
> > mirrored pair of 36GB drives that are inside the hardware. The megaraid
> > device is a Raid 5 group of 4 73GB drives (3 in the array, and 1 hot
> > spare). The megaraid is to be used for NFS file storage and the accraid
> > is to be used for the system drive.
> > 
> > Ron
> > 
> > On Tue, 2005-02-08 at 11:47, Brian Long wrote:
> > 
> > > What does it detect the aacraid device as?  /dev/sdb?  If so, why don't
> > > you use the bootloader option mentioned previously to get grub to use
> > > sdb as the boot drive?
> > > 
> > > /Brian/
> 
> _______________________________________________
> Kickstart-list mailing list
> Kickstart-list redhat com
> https://www.redhat.com/mailman/listinfo/kickstart-list


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]