[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Libguestfs] [PATCH] internationalisation: Replace autopoint infrastructure with libintl-perl



The autopoint generated make infrastructure doesn't handle perl. It's also
unfathomably complicated. This patch replaces it with the much simpler
infrastructure from the libintl-perl sample application. This also fixes the
generation of virt-v2v.pot.
---
 .gitignore      |   17 ----
 README-NLS      |  200 ++++++++++++++++++++++++++++++++++++++++
 autogen.sh      |   16 ---
 configure.ac    |    7 +-
 po/Makefile     |   97 ++++++++++++++++++++
 po/PACKAGE      |   14 +++
 po/POTFILES.in  |   12 ++-
 po/virt-v2v.pot |  272 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 595 insertions(+), 40 deletions(-)
 create mode 100644 README-NLS
 delete mode 100644 po/LINGUAS
 create mode 100644 po/Makefile
 create mode 100644 po/PACKAGE
 create mode 100644 po/virt-v2v.pot
 delete mode 100644 po/virtv2v.pot

diff --git a/.gitignore b/.gitignore
index 68f552e..a870fc2 100644
--- a/.gitignore
+++ b/.gitignore
@@ -23,23 +23,6 @@ perl/Makefile-pl.old
 perl/Makefile.PL
 perl/pm_to_blib
 
-po/*.gmo
-po/Makevars.template
-po/POTFILES
-po/remove-potcdate.sed
-po/stamp-it
-po/stamp-po
-po/LINGUAS
-po/Makefile.in.in
-po/Makevars
-po/Rules-quot
-po/boldquot.sed
-po/en boldquot header
-po/en quot header
-po/insert-header.sin
-po/quot.sed
-po/remove-potcdate.sin
-
 v2v/virt-v2v.1
 v2v/virt-v2v.conf.5
 v2v/virt-v2v.pl
diff --git a/README-NLS b/README-NLS
new file mode 100644
index 0000000..9f77651
--- /dev/null
+++ b/README-NLS
@@ -0,0 +1,200 @@
+Notes on National Language Support (NLS)
+****************************************
+
+This package is internationalized with libintl-perl, a free
+internationalization library for Perl, you will need to install a copy of
+libintl-perl in order to use the package.  You can get libintl-perl from the
+Comprehensive Perl Archive Network CPAN at http://www.cpan.org/.
+
+The following notes are meant to be a quick start guide for somewhat
+experienced users and system administrators and many important details had to
+be omitted for brevity.  If you have any difficulties with the
+internationalization features of this package, no matter if you are a
+programmer, a translator, or an end user, feel free to ask at the mailing list
+for libintl-perl.  To do so, send an e-mail to the address 
+<libintl-perl AT imperia DOT net> (please replace "AT" with a "@", and "DOT"
+with a dot ".").
+
+You can subscribe to this list at 
+
+     http://ml.imperia.org/mailman/listinfo/libintl-perl
+
+A searchable archive of earlier postings is located at
+
+     http://ml.imperia.org/libintl-perl/
+
+You may already find an answer to your question there.
+
+Feel free to include this document in your own Perl packages internationalized
+with libintl-perl, no severe copyright restrictions apply.  You should send
+corrections or improvements to the author Guido Flohr <guido AT imperia DOT
+net>, so that others can benefit from your changes.
+
+The End User's View
+===================
+
+The installation routine for this package will automatically take care that
+your system has a sufficient version of libintl-perl installed.  This is
+basically sufficient for proper operation, but - especially if
+internationalized software is new to you - you should read on carefully in
+order to fully benefit from the internationalization (I18N) features of this
+package.
+
+Perl Setup
+----------
+
+The I18N library libintl-perl will run with a wide range of Perl versions (at
+least from Perl version 5.005_03 to Perl 5.8.0) but you will experience slight
+difference in features and performance depending on the version of Perl you
+use.
+
+With Perl versions prior to 5.7.3 you can use the package for all European
+scripts (including those with Greek or Cyrillic scripts), and also for many
+scripts used outside Europe, like Arabic, Hebrew, Georgian, Vietnamese or
+Thai, more general all scripts using 8 bit charsets.  Other scripts are only
+available if the translations in this package are provided in Unicode and they
+can only be output in Unicode.
+
+Beginning with Perl 5.7.3 the module Encode became part of the Perl core, and
+it offers you a much wider range of possible scripts.  If you plan to use some
+of the lesser used scripts for Chinese, Japanese, and Korean, you should also
+install the module Encode::HanExtra.
+
+Setting Your Language
+---------------------
+
+Most modern systems are already prepared and configured for
+internationalization, and the user interface of the software you have
+installed will already be configured for your preferred language.  Packages
+internationalized with libintl-perl will honor these configuration settings
+and will also operate in your preferred language if the necessary translations
+are available.
+
+The environment variable "LANGUAGE" has the highest precedence for
+translations.  The most common format for this environment variable is a
+(lowercase) two-letter language code and an (uppercase) two-letter country
+code separated by an underscore "_", for example:
+
+     LANGUAGE=fr_BE
+     export LANGUAGE
+
+This will set your language preferences to French ("fr") for Belgium ("BE").
+Other examples are French for France ("fr_FR"), German for Austria ("de_AT"),
+and so on.  You can also omit the country part ("FR", "DE", "IT", "RU", ...)
+in which case a default setting for the country will be assumed.
+
+If there are no translations available for your selected languages, the
+original message (normally in English) will be displayed.
+
+You can also define a chain of languages to be tried separated by a colon:
+
+     LANGUAGE=fr_BE:fr_FR:fr:it
+
+Read this as: "I want translations in French for Belgium.  If they are not
+available try French for France, then any French translation, and finally
+Italian".  Please note that this chain notation is only allowed for the
+environment variable "LANGUAGE", it is not valid for any of the following
+variables.
+
+If "LANGUAGE" is not set, the library checks the variable "LANG".  It has the
+same syntax as "LANGUAGE" but does not allow the preferences chain with the
+colon syntax.  After "LANG" the variable "LC_MESSAGES" (think "locale category
+messages") is tried, and finally "LC_ALL".
+
+Note for Microsoft Windows users: The locale preferences you have configured
+for your system cannot yet be evaluated by libintl-perl.  This may change for
+future versions of libintl-perl but for the moment you have to make do with
+the instructions given above.  In order to set environment variables, you have
+to right-click on the icon "My Computer" on your desktop, select "Properties"
+in the context menu, and then click the tab labelled "Environment variables".
+
+Setting the Output Charset
+--------------------------
+
+Even if you have managed to properly select your preferred language, you may
+still have difficulties reading the program languages, because libintl-perl
+was unable to determine the correct charset to use for messages.  For example,
+it may assume Unicode ("UTF-8") but you really need ISO-Latin-1 (also known as
+"Latin-1" or "ISO-8859-1").  If this is the case, please set the environment
+variable "OUTPUT_CHARSET" to the appropriate value, for example:
+
+     OUTPUT_CHARSET=iso-8859-1
+     export OUTPUT_CHARSET
+
+Charset names are case-insensitive, i. e. "LATIN-1" is the equivalent to
+"Latin-1" or even "lAtIn-1".
+
+Note: The output charset "utf8" is NOT recognized.  Please use the correct
+abbreviation "utf-8" (with a hyphen) instead.
+
+The Translator's View
+=====================
+
+If you want to contribute a new translation to this package, please contact
+the author first.  Somebody may have already started this translation, and
+furthermore the package author will be able to give you detailled instructions
+and help.
+
+Translating a Perl package is not much work and it does not require any
+technical skills.  If you are able to use the software itself, you will also
+be able to contribute a translation for your language.  But why should you do
+that? You are able to read and understand this text and you will also be able
+to understand the English messages that the software spits out by default.
+
+Computers are an integral part of today's society.  Computers are used to
+explore new sources of information, forbidding computers would be a modern
+form of censorship.  Computers may also improve social life, the internet
+helps people to find contacts in their area and all over the world, even if
+they would otherwise be deprived from that because of a handicap, lack of money
+for traveling, or other reasons.  In many societies, the ability to use and 
+handle a computer also has a strong impact on your perspectives in life, you 
+may not be able to find an adequate job because of your lack of computer 
+experience, or you may even lose your job because of that.
+
+Everybody should benefit from computers, regardless of cultural
+background. Computers are expansive goods, and their price is already a high
+barrier to cross.  If computers speak in a foreign language, the learning
+curve gets steeper and the barrier gets even higher.  You can help the people
+that share your native language by contributing a translation.  The author of
+this package has already prepared everything, the rest is up to you!
+
+The Programmer's View
+=====================
+
+You have downloaded this package because you want to use it in your own
+project(s).  The fact that the package is internationalized with libintl-perl
+does not affect its usability in any way.  But you should keep in mind that
+textual messages produced by the package may change according to the locale
+settings at run-time.  This can lead to errors.  For example, if you parse
+error messages produced by the package, you will most probably fail to detect
+what you are looking for, if these error messages are suddenly presented in
+another language or another output charset.
+
+It is probably needless to say that this is bad practice and an indicator for
+a poorly written interface.  Either you have missed the correct method for
+determining the substance of the message in a locale-independent manner, or
+the author of the package has mis-designed the package interface.  In any
+case, this is a technical problem that should be solved by technicians.  You
+should not put that burden on the shoulders of your users but rather solve the
+problem in cooperation with the author of the module that causes it.
+
+If this is absolutely impossible, as a temporary workaround you can completely
+switch off the native language support of the package by setting the
+environment variable "LANGUAGE" to the special value "C":
+
+     BEGIN {
+         $ENV{LANGUAGE} = $ENV{LANG} = "C";
+     }
+
+The value "C" instructs libintl-perl to leave all messages untouched, and you
+can use the package as if it was not internationalized at all.
+
+If the project you are working on is not yet internationalized, you should
+consider to prepare it for internationalization now.  Doing so is only little 
+work for yourself, but results in a large benefit for the users of your 
+software.  The package "libintl-perl" ships with exhaustive documentation for
+programmers and a sample package that you can use as a skeleton for your own
+project(s).  Internationalizing Perl software with libintl-perl is easy, the
+package that this file is a part of, prooves that.
+
+Guido Flohr
diff --git a/autogen.sh b/autogen.sh
index 81bc944..f47dad5 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -21,22 +21,6 @@
 set -e
 set -v
 
-# Run autopoint, to get po/Makevars.template:
-autopoint
-
-# Create gettext configuration.
-echo "$0: Creating po/Makevars from po/Makevars.template ..."
-rm -f po/Makevars
-sed '
-  /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
-  /^MSGID_BUGS_ADDRESS *=/s/=.*/= '"$MSGID_BUGS_ADDRESS"'/
-  /^XGETTEXT_OPTIONS *=/{
-    s/$/ \\/
-    a\
-        '"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
-  }
-' po/Makevars.template >po/Makevars
-
 autoreconf -i
 
 CONFIGUREDIR=.
diff --git a/configure.ac b/configure.ac
index 6a6ad13..b8d49d4 100644
--- a/configure.ac
+++ b/configure.ac
@@ -52,10 +52,6 @@ AC_PATH_PROGS([MKISOFS],[mkisofs],[no],
         [$PATH$PATH_SEPARATOR/usr/sbin$PATH_SEPARATOR/sbin])
 test "x$MKISOFS" = "xno" && AC_MSG_ERROR([mkisofs must be installed])
 
-dnl For i18n.
-AM_GNU_GETTEXT([external])
-AM_GNU_GETTEXT_VERSION([0.14])
-
 dnl Check for Perl
 AC_CHECK_PROG([PERL],[perl],[perl],[no])
 test "x$PERL" = "xno" &&
@@ -82,6 +78,5 @@ AC_CONFIG_FILES([Makefile
                  snapshot/Makefile
                  snapshot/virt-snapshot.pl
                  v2v/Makefile
-                 v2v/virt-v2v.pl
-                 po/Makefile.in])
+                 v2v/virt-v2v.pl])
 AC_OUTPUT
diff --git a/po/LINGUAS b/po/LINGUAS
deleted file mode 100644
index e69de29..0000000
diff --git a/po/Makefile b/po/Makefile
new file mode 100644
index 0000000..6fb37b1
--- /dev/null
+++ b/po/Makefile
@@ -0,0 +1,97 @@
+# Makefile for various po files.
+
+srcdir = .
+libdir = ../lib
+
+#CATALOGS = $(addsuffix .po, LINGUAS)
+CATALOGS = $(LINGUAS)
+MO_FILES = $(addsuffix .mo, $(LINGUAS))
+
+MSGMERGE = msgmerge
+MSGFMT   = msgfmt
+XGETTEXT = xgettext
+CATOBJEXT = .po
+
+include PACKAGE
+
+TD = $(strip $(TEXTDOMAIN))
+
+default: help
+
+all: $(TD).pot update-po update-mo install
+
+help:
+	@echo "Available targets:"
+	@echo "  pot                       - remake master catalog"
+	@echo "  update-po                 - merge po files"
+	@echo "  update-mo                 - regenerate mo files"
+	@echo "  install                   - install mo files"
+	@echo "  all			   - all of the above"
+
+POTFILES = $(srcdir)/POTFILES.in \
+	$(shell cat $(srcdir)/POTFILES.in) 
+
+pot: $(TD).pot 
+
+clean:
+	rm -f *~ *.bak *.mo
+
+# FIXME: The parameter --from-code is only needed if your sources contain
+# any 8 bit data (even in comments).  UTF-8 is only a guess here, but it
+# will at least accept any 8 bit data.
+#
+# The parameter "--language=perl" is not strictly needed because the
+# source language of all our files will be auto-detected by xgettext
+# by their filename extension.  You should even avoid this parameter
+# if you want to extract strings from multiple source languages.
+$(TD).pot: $(POTFILES)
+	$(XGETTEXT) --output=$(srcdir)/$(TD).pox --from-code=utf-8 \
+		--add-comments=TRANSLATORS: --files-from=$(srcdir)/POTFILES.in \
+		--copyright-holder="$(COPYRIGHT_HOLDER)" \
+		--msgid-bugs-address="$(MSGID_BUGS_ADDRESS)" \
+		--keyword --keyword='$$__' --keyword=__ --keyword=__x \
+		--keyword=__n:1,2 --keyword=__nx:1,2 --keyword=__xn:1,2 \
+		--keyword=__p:1c,2 --keyword=__np:1c,2,3 \
+		--keyword=__npx:1c,2,3 --keyword=N__ --keyword=N__n:1,2 \
+		--keyword=N__p:1c,2 --keyword=N__np:1c,2,3 --keyword=%__ \
+		--language=perl && \
+	rm -f $@ && mv $(TD).pox $@
+
+install: $(MO_FILES)
+	cd $(srcdir); \
+	targetdir='$(libdir)/LocaleData'; \
+	languages='$(LINGUAS)'; \
+	for lang in $$languages; do \
+		mkdir -p "$$targetdir/$$lang/LC_MESSAGES" || exit 1; \
+		dest="$$targetdir/$$lang/LC_MESSAGES/$(TD).mo"; \
+		cat="$$lang.mo"; \
+		echo "installing $$cat as $$dest"; \
+		cp -f $$cat $$dest && chmod 644 $$dest || exit 1; \
+	done
+
+update-mo: $(MO_FILES)
+
+update-po:
+	$(MAKE) $(TD).pot
+	cd $(srcdir); \
+        catalogs='$(CATALOGS)'; \
+        for cat in $$catalogs; do \
+          cat=`basename $$cat`; \
+          lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+          mv $$lang.po $$lang.old.po; \
+          echo "$$lang:"; \
+          if $(MSGMERGE) $$lang.old.po $(TD).pot -o $$lang.po; then \
+            rm -f $$lang.old.po; \
+          else \
+            echo "msgmerge for $$cat failed!"; \
+            rm -f $$lang.po; \
+            mv $$lang.old.po $$lang.po; \
+          fi; \
+        done
+
+.SUFFIXES:
+.SUFFIXES: .po .mo
+
+.po.mo:
+	$(MSGFMT) --check --statistics --verbose -o $@ $<
+
diff --git a/po/PACKAGE b/po/PACKAGE
new file mode 100644
index 0000000..ae8deb2
--- /dev/null
+++ b/po/PACKAGE
@@ -0,0 +1,14 @@
+# Makefile snippet that holds all package-dependent information.
+
+# Add more languages here!  Beware that this is a makefile snippet and
+# you have to adhere to make syntax.
+LINGUAS = 
+
+# Textdomain for our package.
+TEXTDOMAIN = virt-v2v
+
+# Initial copyright holder added to pot and po files.
+COPYRIGHT_HOLDER = Red Hat Inc.
+
+# Where to send msgid bugs?  
+MSGID_BUGS_ADDRESS = libguestfs redhat com
diff --git a/po/POTFILES.in b/po/POTFILES.in
index 02402db..488e8f3 100644
--- a/po/POTFILES.in
+++ b/po/POTFILES.in
@@ -1 +1,11 @@
-v2v/virt-v2v.pl
+../perl/lib/Sys/VirtV2V/GuestOS.pm
+../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm
+../perl/lib/Sys/VirtV2V/HVSource.pm
+../perl/lib/Sys/VirtV2V/HVSource/Xen/Linux.pm
+../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm
+../perl/lib/Sys/VirtV2V/HVTarget.pm
+../perl/lib/Sys/VirtV2V/MetadataReader/LibVirt.pm
+../perl/lib/Sys/VirtV2V/MetadataReader/LibVirtXML.pm
+../perl/lib/Sys/VirtV2V/MetadataReader.pm
+../snapshot/virt-snapshot.pl
+../v2v/virt-v2v.pl
diff --git a/po/virt-v2v.pot b/po/virt-v2v.pot
new file mode 100644
index 0000000..843d43d
--- /dev/null
+++ b/po/virt-v2v.pot
@@ -0,0 +1,272 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Red Hat Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: libguestfs redhat com\n"
+"POT-Creation-Date: 2009-09-02 13:01+0100\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL ADDRESS>\n"
+"Language-Team: LANGUAGE <LL li org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS.pm:160
+#, perl-brace-format
+msgid "WARNING unable to access {path}."
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:120
+msgid "/etc/selinux/config does not exist"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:132
+msgid "Didn't find SELINUXTYPE n /etc/syslinux/config"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:141
+#, perl-brace-format
+msgid "Unable to find an SELinux policy file matching {path}"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:162
+msgid "Unable to successfully load an SELinux policy"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:209
+msgid "Unable to find any valid modprobe configuration"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:393
+msgid "Unable to find a default kernel"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:437
+#, perl-brace-format
+msgid "{filename} doesn't contain a valid kernel\n"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:491
+msgid "Unable to determine a kernel architecture"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:561
+#, perl-brace-format
+msgid "Found dependency loop installing {label}: {path}"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:755
+#, perl-brace-format
+msgid "No {object} given matching {label}\n"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:772
+msgid "file"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:790
+msgid "alias"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:808
+msgid "dependencies"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:876
+#, perl-brace-format
+msgid "No mapping found for block device {device}"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:930
+#, perl-brace-format
+msgid "Didn't find a grub entry for kernel version {version}"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:935
+#, perl-brace-format
+msgid "WARNING: Kernel version {version} doesn't have an initrd entry in grub"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:128
+#, perl-brace-format
+msgid "{name} configured with virtio drivers"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:130
+#, perl-brace-format
+msgid "{name} configured without virtio drivers"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:228
+#, perl-brace-format
+msgid ""
+"WARNING: Don't know how to update {module}, which loads the {module} "
+"module.\n"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:324
+msgid ""
+"No bootable kernels installed, and no replacement specified in "
+"configuration.\n"
+"Unable to continue"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:452
+#, perl-brace-format
+msgid ""
+"WARNING: No replacement found for {xpath} in domain XML. The node was "
+"removed."
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:503
+#, perl-brace-format
+msgid "The connected hypervisor does not support a {arch} kvm guest"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:533
+#, perl-brace-format
+msgid "The connected hypervisor does not support a machine type of {machine}."
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:551
+#, perl-brace-format
+msgid "The connected hypervisor does not support feature {feature}"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/HVTarget.pm:67
+msgid "Unable to find a module to configure this guest"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/MetadataReader/LibVirt.pm:107
+#, perl-brace-format
+msgid "{name} isn't a valid guest name"
+msgstr ""
+
+#: ../perl/lib/Sys/VirtV2V/MetadataReader/LibVirtXML.pm:84
+#, perl-brace-format
+msgid "WARNING unknown configuration directive {directive} in {name} section"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:185
+msgid "--commit and --rollback are mutually exclusive"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:194
+msgid "no guest argument given"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:199
+#, perl-brace-format
+msgid "{input} is not a valid input format"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:239
+msgid "No resulting domain"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:251
+#, perl-brace-format
+msgid "Unable to open {file}: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:261 ../snapshot/virt-snapshot.pl:293
+#, perl-brace-format
+msgid "Error closing {file}: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:265 ../snapshot/virt-snapshot.pl:296
+#, perl-brace-format
+msgid "Wrote output to {file}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:283
+#, perl-brace-format
+msgid "Unable to create guest: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:285
+msgid "Consider using the --outputxml option"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:331
+#, perl-brace-format
+msgid "Unable to create virt-snapshot storage pool: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:349
+#, perl-brace-format
+msgid "Unable to start virt-snapshot storage pool: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:359
+msgid "virt-snapshot storage pool is temporarily unavailable"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:494
+#, perl-brace-format
+msgid "Failed to commit snapshot '{path}' to backing store '{backingstore}'"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:522
+#, perl-brace-format
+msgid ""
+"A snapshot already exists for {guest}. You must commit it or roll it back "
+"back before creating a new snapshot."
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:531
+#, perl-brace-format
+msgid "Unable to write to {path}: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:537
+#, perl-brace-format
+msgid "Error closing {path}: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:569
+#, perl-brace-format
+msgid "Unable to create storage volume: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:602
+#, perl-brace-format
+msgid "Refusing to rollback guest {name} without backed-up xml"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:613
+#, perl-brace-format
+msgid "Failed to delete {file}: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:624
+#, perl-brace-format
+msgid "Unable to delete backup xml file {file}: {error}"
+msgstr ""
+
+#: ../snapshot/virt-snapshot.pl:686
+#, perl-brace-format
+msgid "invalid source element: {element}"
+msgstr ""
+
+#: ../v2v/virt-v2v.pl:147
+msgid "virt-v2v: no guest argument given"
+msgstr ""
+
+#: ../v2v/virt-v2v.pl:164
+#, perl-brace-format
+msgid "virt-v2v: {input} is not a valid metadata format"
+msgstr ""
+
+#: ../v2v/virt-v2v.pl:259
+msgid "no root device found in this operating system image"
+msgstr ""
+
+#: ../v2v/virt-v2v.pl:260
+msgid "multiboot operating systems are not supported by v2v"
+msgstr ""
diff --git a/po/virtv2v.pot b/po/virtv2v.pot
deleted file mode 100644
index e69de29..0000000
-- 
1.6.2.5


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]