[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] networking static ip address



Thanks for the input.

Then, I suppose there's no way to assign the IP on boot without DHCP, there is?

Can it be done without using <network> type elements?

Regards,

  Francisco.


On Fri, Feb 20, 2009 at 19:52, Ulrich Dangel <uli spamt net> wrote:
On Friday 20 February 2009 13:54:20 Francisco José Martín wrote:
Hi,

> We have tried several ways to assign a static ip address to the guest os
> eth0 device on boot, but we didn't success. Is there any easy way to do it?

Yes. Create a network definition, specify a host element to the dhcp
definition, attach the machine to the created bridge and it should work.

<network>
 <name>sample</name>
 <forward dev='eth0' mode='nat'/>
 <bridge name='intbr0' stp='on' forwardDelay='0' />
 <ip address='192.168.122.1' netmask='255.255.255.0'>
   <dhcp>
     <range start='192.168.122.2' end='192.168.122.254' />
     <host mac='AA:BB:CC:DD:EE:FF' ip='192.168.122.102'/>
   </dhcp>
 </ip>
</network>

Snippet for the domain definition:

<interface type='bridge'>
 <mac address='AA:BB:CC:DD:EE:FF'/>
 <source bridge='intbr0'/>
 <target dev='vnet0'/>
</interface>


> When the guest OS is booted, the eth0 device exists, but is not up, and
> doesn't have the IP.

Is dnsmasq installed and running? Does the guest system use dhcp?

Uli

--
Libvir-list mailing list
Libvir-list redhat com
https://www.redhat.com/mailman/listinfo/libvir-list


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]