[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] F11 and KVM Migrations



On 07/09/2009 01:43 AM, Chris Lalancette wrote:
Yeah, that's just not going to work.  In theory it might work, but it's never
been tested, so I'm not surprised it doesn't.  In general migration is extremely
finicky when it comes to CPU versions, and versions of the software.

If you are interested in debugging it more, I would suggest stopping libvirtd on
both sides, starting them back up by hand with:

LIBVIRT_DEBUG=1 /usr/sbin/libvirtd --verbose --listen

And then re-running your test.  That will dump lots of debugging information on
both machines, and you might be able to get somewhat of a better idea of what is
happening.

Host 1:

[root vm1 ~]# rpm -q libvirt
libvirt-0.6.2-12.fc11.x86_64

[root vm1 ~]# uname -r
2.6.29.5-191.fc11.x86_64

Host 2:

[root vm2 ~]# rpm -q libvirt
libvirt-0.6.2-12.fc11.x86_64

[root vm2 ~]# uname -r
2.6.29.5-191.fc11.x86_64

Host 2 doesn't want to start with --verbose:

08:16:44.859: debug : virEventInterruptLocked:635 : Skip interrupt, 0 0
08:16:44.859: debug : virEventAddHandleImpl:111 : Add handle 11 13 0x412c70 0x13368a0
08:16:44.859: debug : virEventInterruptLocked:635 : Skip interrupt, 0 0
08:16:44.868: error : Cannot access CA certificate '/etc/pki/CA/cacert.pem': No such file or directory

What's weird is, if I start the service it works fine. It only errors about that cacert if I do it raw. I can't find any reference to cacert in my config. Help!

--
Scott Baker - Canby Telcom
System Administrator - RHCE - 503.266.8253


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]