[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] device type 'interface' cannot be attached



Gerry Reno wrote:
I'm using libvirt 0.6.2 on F11 x86_64 and CPU supports hw virtualization. When I try to do 'virsh attach-interface ...' I get an error that the function is not supported by the hypervisor device type 'interface' cannot be attached. Is this command not supported? Or is there something special I need to do? I found it in the man page.



I have a private network declared now, thank you Mark.

And here is how I am trying to attach an interface:
# cat PRIVBR0.xml
 <network>
   <name>PRIVBR0</name>
   <bridge name='privbr0'/>
   <ip address='172.19.0.1' netmask='255.255.0.0'>
   </ip>
 </network>

# virsh net-list --all
Name                 State      Autostart
-----------------------------------------
PRIVBR0              active     yes
default              active     no

# virsh attach-interface CC  bridge privbr0
error: this function is not supported by the hypervisor: device type 'interface' cannot be attached

# grep emulator  CC.xml
   <emulator>/usr/bin/qemu-kvm</emulator>


I tried the 'attach-interface' both while the domain is running and while shutdown.  Neither works.

Can anyone see something wrong in what I'm doing here or the reason that 'attach-interface' is failing?

-Gerry





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]