[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[libvirt] Re: device type 'interface' cannot be attached



----- "Gerry Reno" <greno verizon net> wrote:
> Gerry Reno wrote:
> > Gerry Reno wrote:
> >> I'm using libvirt 0.6.2 on F11 x86_64 and CPU supports hw
> >> virtualization.  When I try to do 'virsh attach-interface ...' I get
> >> an error that the function is not supported by the hypervisor device
> >> type 'interface' cannot be attached.  Is this command not supported?
> >> Or is there something special I need to do?  I found it in the man page.


> >>
> >
> >
> > I have a private network declared now, thank you Mark.
> >
> > And here is how I am trying to attach an interface:
> > # cat PRIVBR0.xml
> >  <network>
> >    <name>PRIVBR0</name>
> >    <bridge name='privbr0'/>
> >    <ip address='172.19.0.1' netmask='255.255.0.0'>
> >    </ip>
> >  </network>
> >
> > # virsh net-list --all
> > Name                 State      Autostart
> > -----------------------------------------
> > PRIVBR0              active     yes
> > default              active     no
> >
> > # virsh attach-interface CC  bridge privbr0
> > error: this function is not supported by the hypervisor: device type
> > 'interface' cannot be attached
> >
> > # grep emulator  CC.xml
> >    <emulator>/usr/bin/qemu-kvm</emulator>
> >
> >
> > I tried the 'attach-interface' both while the domain is running and
> > while shutdown.  Neither works.
> >
> > Can anyone see something wrong in what I'm doing here or the reason
> > that 'attach-interface' is failing?
> >
> > -Gerry
> >
> I have also tried this as 'attach-device' with the same result:
>
> # cat INTERFACE_PRIVBR0.xml
>     <interface type='bridge'>
>       <mac address='00:0c:01:41:50:01'/>
>       <source bridge='privbr0'/>
>     </interface>
>
> # virsh attach-device CC INTERFACE_PRIVBR0.xml
> error: Failed to attach device from INTERFACE_PRIVBR0.xml
> error: this function is not supported by the hypervisor: device type
> 'interface' cannot be attached
>
> I opened the following bug on this issue:
> https://bugzilla.redhat.com/show_bug.cgi?id=537688
>


Hot adding nics to qemu was added in libvirt 0.7


>
> -Gerry
>
> --
> Libvir-list mailing list
> Libvir-list redhat com
> https://www.redhat.com/mailman/listinfo/libvir-list
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]