[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[libvirt] [PATCH] Add support for -enable-kqemu flag



Previously QEMU enabled KQEMU by default and had -no-kqemu.
0.11.x switched to requiring -enable-kqemu. 0.12.x dropped
kqemu entirely. This patch adds support for -enable-kqemu
so 0.11.x works. It replaces a huge set of if() with a
switch() to make the code a bit more readable.

This patch was inspired by the one John Lumby send to the
list a while ago, but the way I've implemented it is more
in line with the logic we have for KVM.

http://www.redhat.com/archives/libvir-list/2010-July/msg00368.html

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Support
  -enable-kqemu
---
 src/qemu/qemu_conf.c |   84 +++++++++++++++++++++++++++++++++----------------
 src/qemu/qemu_conf.h |    1 +
 2 files changed, 57 insertions(+), 28 deletions(-)

diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c
index fb85220..0ddf128 100644
--- a/src/qemu/qemu_conf.c
+++ b/src/qemu/qemu_conf.c
@@ -1156,6 +1156,8 @@ static unsigned long long qemudComputeCmdFlags(const char *help,
 
     if (strstr(help, "-no-kqemu"))
         flags |= QEMUD_CMD_FLAG_KQEMU;
+    if (strstr(help, "-enable-kqemu"))
+        flags |= QEMUD_CMD_FLAG_ENABLE_KQEMU;
     if (strstr(help, "-no-kvm"))
         flags |= QEMUD_CMD_FLAG_KVM;
     if (strstr(help, "-enable-kvm"))
@@ -3662,6 +3664,7 @@ int qemudBuildCommandLine(virConnectPtr conn,
     char boot[VIR_DOMAIN_BOOT_LAST];
     struct utsname ut;
     int disableKQEMU = 0;
+    int enableKQEMU = 0;
     int disableKVM = 0;
     int enableKVM = 0;
     int qargc = 0, qarga = 0;
@@ -3711,38 +3714,59 @@ int qemudBuildCommandLine(virConnectPtr conn,
 
     emulator = def->emulator;
 
-    /* Need to explicitly disable KQEMU if
-     * 1. Guest domain is 'qemu'
-     * 2. The qemu binary has the -no-kqemu flag
-     */
-    if ((qemuCmdFlags & QEMUD_CMD_FLAG_KQEMU) &&
-        def->virtType == VIR_DOMAIN_VIRT_QEMU)
-        disableKQEMU = 1;
-
-    /* Need to explicitly disable KVM if
-     * 1. Guest domain is 'qemu'
-     * 2. The qemu binary has the -no-kvm flag
+    /*
+     * do not use boot=on for drives when not using KVM since this
+     * is not supported at all in upstream QEmu.
      */
     if ((qemuCmdFlags & QEMUD_CMD_FLAG_KVM) &&
-        def->virtType == VIR_DOMAIN_VIRT_QEMU) {
-        disableKVM = 1;
+        (def->virtType == VIR_DOMAIN_VIRT_QEMU) &&
+        (qemuCmdFlags & QEMUD_CMD_FLAG_DRIVE_BOOT))
+        qemuCmdFlags -= QEMUD_CMD_FLAG_DRIVE_BOOT;
+
+    switch (def->virtType) {
+    case VIR_DOMAIN_VIRT_QEMU:
+        if (qemuCmdFlags & QEMUD_CMD_FLAG_KQEMU)
+            disableKQEMU = 1;
+        if (qemuCmdFlags & QEMUD_CMD_FLAG_KVM)
+            disableKVM = 1;
+        break;
 
-        /*
-         * do not use boot=on for drives when not using KVM since this
-         * is not supported at all in upstream QEmu.
-         */
-        if (qemuCmdFlags & QEMUD_CMD_FLAG_DRIVE_BOOT)
-            qemuCmdFlags -= QEMUD_CMD_FLAG_DRIVE_BOOT;
-    }
+    case VIR_DOMAIN_VIRT_KQEMU:
+        if (qemuCmdFlags & QEMUD_CMD_FLAG_KVM)
+            disableKVM = 1;
 
-    /* Should explicitly enable KVM if
-     * 1. Guest domain is 'kvm'
-     * 2. The qemu binary has the -enable-kvm flag
-     * NOTE: user must be responsible for loading the kvm modules
-     */
-    if ((qemuCmdFlags & QEMUD_CMD_FLAG_ENABLE_KVM) &&
-        def->virtType == VIR_DOMAIN_VIRT_KVM)
-        enableKVM = 1;
+        if (qemuCmdFlags & QEMUD_CMD_FLAG_ENABLE_KQEMU) {
+            enableKQEMU = 1;
+        } else if (!(qemuCmdFlags & QEMUD_CMD_FLAG_KQEMU)) {
+            qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                            _("the QEMU binary %s does not support kqemu"),
+                            emulator);
+        }
+        break;
+
+    case VIR_DOMAIN_VIRT_KVM:
+        if (qemuCmdFlags & QEMUD_CMD_FLAG_KQEMU)
+            disableKQEMU = 1;
+
+        if (qemuCmdFlags & QEMUD_CMD_FLAG_ENABLE_KVM) {
+            enableKVM = 1;
+        } else if (!(qemuCmdFlags & QEMUD_CMD_FLAG_KVM)) {
+            qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                            _("the QEMU binary %s does not support kvm"),
+                            emulator);
+        }
+        break;
+
+    case VIR_DOMAIN_VIRT_XEN:
+        /* XXX better check for xenner */
+        break;
+
+    default:
+        qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                        _("the QEMU binary %s does not support %s"),
+                        emulator, virDomainVirtTypeToString(def->virtType));
+        break;
+    }
 
 #define ADD_ARG_SPACE                                                   \
     do { \
@@ -3857,6 +3881,10 @@ int qemudBuildCommandLine(virConnectPtr conn,
 
     if (disableKQEMU)
         ADD_ARG_LIT("-no-kqemu");
+    else if (enableKQEMU) {
+        ADD_ARG_LIT("-enable-kqemu");
+        ADD_ARG_LIT("-kernel-kqemu");
+    }
     if (disableKVM)
         ADD_ARG_LIT("-no-kvm");
     if (enableKVM)
diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h
index 1aa9d2e..4f9c714 100644
--- a/src/qemu/qemu_conf.h
+++ b/src/qemu/qemu_conf.h
@@ -92,6 +92,7 @@ enum qemud_cmd_flags {
     QEMUD_CMD_FLAG_PCI_CONFIGFD  = (1LL << 36), /* pci-assign.configfd */
     QEMUD_CMD_FLAG_NODEFCONFIG   = (1LL << 37), /* -nodefconfig */
     QEMUD_CMD_FLAG_BOOT_MENU     = (1LL << 38), /* -boot menu=on support */
+    QEMUD_CMD_FLAG_ENABLE_KQEMU  = (1LL << 39), /* Is the -enable-kqemu flag available to "enable KQEMU full virtualization support" */
 };
 
 /* Main driver state */
-- 
1.7.2.1


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]