[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[libvirt] [PATCH 09/10] Move domain lock / job helper code to separate file



To allow the APIs to be used from separate files, move the domain
lock / job helper code into qemu_domain.c

* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add domain lock
  / job code
* src/qemu/qemu_driver.c: Remove domain lock / job code
---
 src/qemu/qemu_domain.c |  230 ++++++++++++++++++++++++++++++++++++++++++++++++
 src/qemu/qemu_domain.h |   16 ++++
 src/qemu/qemu_driver.c |  226 -----------------------------------------------
 3 files changed, 246 insertions(+), 226 deletions(-)

diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index 14364ff..27f353f 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -30,12 +30,17 @@
 #include "virterror_internal.h"
 #include "c-ctype.h"
 
+#include <sys/time.h>
+
 #include <libxml/xpathInternals.h>
 
 #define VIR_FROM_THIS VIR_FROM_QEMU
 
 #define QEMU_NAMESPACE_HREF "http://libvirt.org/schemas/domain/qemu/1.0";
 
+#define timeval_to_ms(tv)       (((tv).tv_sec * 1000ull) + ((tv).tv_usec / 1000))
+
+
 static void *qemuDomainObjPrivateAlloc(void)
 {
     qemuDomainObjPrivatePtr priv;
@@ -372,3 +377,228 @@ void qemuDomainSetNamespaceHooks(virCapsPtr caps)
     caps->ns.format = qemuDomainDefNamespaceFormatXML;
     caps->ns.href = qemuDomainDefNamespaceHref;
 }
+
+/*
+ * obj must be locked before calling, qemud_driver must NOT be locked
+ *
+ * This must be called by anything that will change the VM state
+ * in any way, or anything that will use the QEMU monitor.
+ *
+ * Upon successful return, the object will have its ref count increased,
+ * successful calls must be followed by EndJob eventually
+ */
+
+/* Give up waiting for mutex after 30 seconds */
+#define QEMU_JOB_WAIT_TIME (1000ull * 30)
+
+int qemuDomainObjBeginJob(virDomainObjPtr obj)
+{
+    qemuDomainObjPrivatePtr priv = obj->privateData;
+    struct timeval now;
+    unsigned long long then;
+
+    if (gettimeofday(&now, NULL) < 0) {
+        virReportSystemError(errno, "%s",
+                             _("cannot get time of day"));
+        return -1;
+    }
+    then = timeval_to_ms(now) + QEMU_JOB_WAIT_TIME;
+
+    virDomainObjRef(obj);
+
+    while (priv->jobActive) {
+        if (virCondWaitUntil(&priv->jobCond, &obj->lock, then) < 0) {
+            virDomainObjUnref(obj);
+            if (errno == ETIMEDOUT)
+                qemuReportError(VIR_ERR_OPERATION_TIMEOUT,
+                                "%s", _("cannot acquire state change lock"));
+            else
+                virReportSystemError(errno,
+                                     "%s", _("cannot acquire job mutex"));
+            return -1;
+        }
+    }
+    priv->jobActive = QEMU_JOB_UNSPECIFIED;
+    priv->jobSignals = 0;
+    memset(&priv->jobSignalsData, 0, sizeof(priv->jobSignalsData));
+    priv->jobStart = timeval_to_ms(now);
+    memset(&priv->jobInfo, 0, sizeof(priv->jobInfo));
+
+    return 0;
+}
+
+/*
+ * obj must be locked before calling, qemud_driver must be locked
+ *
+ * This must be called by anything that will change the VM state
+ * in any way, or anything that will use the QEMU monitor.
+ */
+int qemuDomainObjBeginJobWithDriver(struct qemud_driver *driver,
+                                    virDomainObjPtr obj)
+{
+    qemuDomainObjPrivatePtr priv = obj->privateData;
+    struct timeval now;
+    unsigned long long then;
+
+    if (gettimeofday(&now, NULL) < 0) {
+        virReportSystemError(errno, "%s",
+                             _("cannot get time of day"));
+        return -1;
+    }
+    then = timeval_to_ms(now) + QEMU_JOB_WAIT_TIME;
+
+    virDomainObjRef(obj);
+    qemuDriverUnlock(driver);
+
+    while (priv->jobActive) {
+        if (virCondWaitUntil(&priv->jobCond, &obj->lock, then) < 0) {
+            virDomainObjUnref(obj);
+            if (errno == ETIMEDOUT)
+                qemuReportError(VIR_ERR_OPERATION_TIMEOUT,
+                                "%s", _("cannot acquire state change lock"));
+            else
+                virReportSystemError(errno,
+                                     "%s", _("cannot acquire job mutex"));
+            qemuDriverLock(driver);
+            return -1;
+        }
+    }
+    priv->jobActive = QEMU_JOB_UNSPECIFIED;
+    priv->jobSignals = 0;
+    memset(&priv->jobSignalsData, 0, sizeof(priv->jobSignalsData));
+    priv->jobStart = timeval_to_ms(now);
+    memset(&priv->jobInfo, 0, sizeof(priv->jobInfo));
+
+    virDomainObjUnlock(obj);
+    qemuDriverLock(driver);
+    virDomainObjLock(obj);
+
+    return 0;
+}
+
+/*
+ * obj must be locked before calling, qemud_driver does not matter
+ *
+ * To be called after completing the work associated with the
+ * earlier qemuDomainBeginJob() call
+ *
+ * Returns remaining refcount on 'obj', maybe 0 to indicated it
+ * was deleted
+ */
+int qemuDomainObjEndJob(virDomainObjPtr obj)
+{
+    qemuDomainObjPrivatePtr priv = obj->privateData;
+
+    priv->jobActive = QEMU_JOB_NONE;
+    priv->jobSignals = 0;
+    memset(&priv->jobSignalsData, 0, sizeof(priv->jobSignalsData));
+    priv->jobStart = 0;
+    memset(&priv->jobInfo, 0, sizeof(priv->jobInfo));
+    virCondSignal(&priv->jobCond);
+
+    return virDomainObjUnref(obj);
+}
+
+
+/*
+ * obj must be locked before calling, qemud_driver must be unlocked
+ *
+ * To be called immediately before any QEMU monitor API call
+ * Must have already called qemuDomainObjBeginJob(), and checked
+ * that the VM is still active.
+ *
+ * To be followed with qemuDomainObjExitMonitor() once complete
+ */
+void qemuDomainObjEnterMonitor(virDomainObjPtr obj)
+{
+    qemuDomainObjPrivatePtr priv = obj->privateData;
+
+    qemuMonitorLock(priv->mon);
+    qemuMonitorRef(priv->mon);
+    virDomainObjUnlock(obj);
+}
+
+
+/* obj must NOT be locked before calling, qemud_driver must be unlocked
+ *
+ * Should be paired with an earlier qemuDomainObjEnterMonitor() call
+ */
+void qemuDomainObjExitMonitor(virDomainObjPtr obj)
+{
+    qemuDomainObjPrivatePtr priv = obj->privateData;
+    int refs;
+
+    refs = qemuMonitorUnref(priv->mon);
+
+    if (refs > 0)
+        qemuMonitorUnlock(priv->mon);
+
+    virDomainObjLock(obj);
+
+    if (refs == 0) {
+        virDomainObjUnref(obj);
+        priv->mon = NULL;
+    }
+}
+
+
+/*
+ * obj must be locked before calling, qemud_driver must be locked
+ *
+ * To be called immediately before any QEMU monitor API call
+ * Must have already called qemuDomainObjBeginJob().
+ *
+ * To be followed with qemuDomainObjExitMonitorWithDriver() once complete
+ */
+void qemuDomainObjEnterMonitorWithDriver(struct qemud_driver *driver,
+                                         virDomainObjPtr obj)
+{
+    qemuDomainObjPrivatePtr priv = obj->privateData;
+
+    qemuMonitorLock(priv->mon);
+    qemuMonitorRef(priv->mon);
+    virDomainObjUnlock(obj);
+    qemuDriverUnlock(driver);
+}
+
+
+/* obj must NOT be locked before calling, qemud_driver must be unlocked,
+ * and will be locked after returning
+ *
+ * Should be paired with an earlier qemuDomainObjEnterMonitorWithDriver() call
+ */
+void qemuDomainObjExitMonitorWithDriver(struct qemud_driver *driver,
+                                        virDomainObjPtr obj)
+{
+    qemuDomainObjPrivatePtr priv = obj->privateData;
+    int refs;
+
+    refs = qemuMonitorUnref(priv->mon);
+
+    if (refs > 0)
+        qemuMonitorUnlock(priv->mon);
+
+    qemuDriverLock(driver);
+    virDomainObjLock(obj);
+
+    if (refs == 0) {
+        virDomainObjUnref(obj);
+        priv->mon = NULL;
+    }
+}
+
+void qemuDomainObjEnterRemoteWithDriver(struct qemud_driver *driver,
+                                        virDomainObjPtr obj)
+{
+    virDomainObjRef(obj);
+    virDomainObjUnlock(obj);
+    qemuDriverUnlock(driver);
+}
+
+void qemuDomainObjExitRemoteWithDriver(struct qemud_driver *driver,
+                                       virDomainObjPtr obj)
+{
+    qemuDriverLock(driver);
+    virDomainObjLock(obj);
+    virDomainObjUnref(obj);
+}
diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h
index 0d1e222..870a900 100644
--- a/src/qemu/qemu_domain.h
+++ b/src/qemu/qemu_domain.h
@@ -27,6 +27,7 @@
 # include "threads.h"
 # include "domain_conf.h"
 # include "qemu_monitor.h"
+# include "qemu_conf.h"
 
 /* Only 1 job is allowed at any time
  * A job includes *all* monitor commands, even those just querying
@@ -80,4 +81,19 @@ struct _qemuDomainObjPrivate {
 void qemuDomainSetPrivateDataHooks(virCapsPtr caps);
 void qemuDomainSetNamespaceHooks(virCapsPtr caps);
 
+int qemuDomainObjBeginJob(virDomainObjPtr obj) ATTRIBUTE_RETURN_CHECK;
+int qemuDomainObjBeginJobWithDriver(struct qemud_driver *driver,
+                                    virDomainObjPtr obj) ATTRIBUTE_RETURN_CHECK;
+int qemuDomainObjEndJob(virDomainObjPtr obj) ATTRIBUTE_RETURN_CHECK;
+void qemuDomainObjEnterMonitor(virDomainObjPtr obj);
+void qemuDomainObjExitMonitor(virDomainObjPtr obj);
+void qemuDomainObjEnterMonitorWithDriver(struct qemud_driver *driver,
+                                         virDomainObjPtr obj);
+void qemuDomainObjExitMonitorWithDriver(struct qemud_driver *driver,
+                                        virDomainObjPtr obj);
+void qemuDomainObjEnterRemoteWithDriver(struct qemud_driver *driver,
+                                        virDomainObjPtr obj);
+void qemuDomainObjExitRemoteWithDriver(struct qemud_driver *driver,
+                                       virDomainObjPtr obj);
+
 #endif /* __QEMU_DOMAIN_H__ */
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 9f2e536..1c4cced 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -142,232 +142,6 @@ static int qemudVMFiltersInstantiate(virConnectPtr conn,
 static struct qemud_driver *qemu_driver = NULL;
 
 
-/*
- * obj must be locked before calling, qemud_driver must NOT be locked
- *
- * This must be called by anything that will change the VM state
- * in any way, or anything that will use the QEMU monitor.
- *
- * Upon successful return, the object will have its ref count increased,
- * successful calls must be followed by EndJob eventually
- */
-
-/* Give up waiting for mutex after 30 seconds */
-#define QEMU_JOB_WAIT_TIME (1000ull * 30)
-
-static int qemuDomainObjBeginJob(virDomainObjPtr obj) ATTRIBUTE_RETURN_CHECK;
-static int qemuDomainObjBeginJob(virDomainObjPtr obj)
-{
-    qemuDomainObjPrivatePtr priv = obj->privateData;
-    struct timeval now;
-    unsigned long long then;
-
-    if (gettimeofday(&now, NULL) < 0) {
-        virReportSystemError(errno, "%s",
-                             _("cannot get time of day"));
-        return -1;
-    }
-    then = timeval_to_ms(now) + QEMU_JOB_WAIT_TIME;
-
-    virDomainObjRef(obj);
-
-    while (priv->jobActive) {
-        if (virCondWaitUntil(&priv->jobCond, &obj->lock, then) < 0) {
-            virDomainObjUnref(obj);
-            if (errno == ETIMEDOUT)
-                qemuReportError(VIR_ERR_OPERATION_TIMEOUT,
-                                "%s", _("cannot acquire state change lock"));
-            else
-                virReportSystemError(errno,
-                                     "%s", _("cannot acquire job mutex"));
-            return -1;
-        }
-    }
-    priv->jobActive = QEMU_JOB_UNSPECIFIED;
-    priv->jobSignals = 0;
-    memset(&priv->jobSignalsData, 0, sizeof(priv->jobSignalsData));
-    priv->jobStart = timeval_to_ms(now);
-    memset(&priv->jobInfo, 0, sizeof(priv->jobInfo));
-
-    return 0;
-}
-
-/*
- * obj must be locked before calling, qemud_driver must be locked
- *
- * This must be called by anything that will change the VM state
- * in any way, or anything that will use the QEMU monitor.
- */
-static int qemuDomainObjBeginJobWithDriver(struct qemud_driver *driver,
-                                           virDomainObjPtr obj) ATTRIBUTE_RETURN_CHECK;
-static int qemuDomainObjBeginJobWithDriver(struct qemud_driver *driver,
-                                           virDomainObjPtr obj)
-{
-    qemuDomainObjPrivatePtr priv = obj->privateData;
-    struct timeval now;
-    unsigned long long then;
-
-    if (gettimeofday(&now, NULL) < 0) {
-        virReportSystemError(errno, "%s",
-                             _("cannot get time of day"));
-        return -1;
-    }
-    then = timeval_to_ms(now) + QEMU_JOB_WAIT_TIME;
-
-    virDomainObjRef(obj);
-    qemuDriverUnlock(driver);
-
-    while (priv->jobActive) {
-        if (virCondWaitUntil(&priv->jobCond, &obj->lock, then) < 0) {
-            virDomainObjUnref(obj);
-            if (errno == ETIMEDOUT)
-                qemuReportError(VIR_ERR_OPERATION_TIMEOUT,
-                                "%s", _("cannot acquire state change lock"));
-            else
-                virReportSystemError(errno,
-                                     "%s", _("cannot acquire job mutex"));
-            qemuDriverLock(driver);
-            return -1;
-        }
-    }
-    priv->jobActive = QEMU_JOB_UNSPECIFIED;
-    priv->jobSignals = 0;
-    memset(&priv->jobSignalsData, 0, sizeof(priv->jobSignalsData));
-    priv->jobStart = timeval_to_ms(now);
-    memset(&priv->jobInfo, 0, sizeof(priv->jobInfo));
-
-    virDomainObjUnlock(obj);
-    qemuDriverLock(driver);
-    virDomainObjLock(obj);
-
-    return 0;
-}
-
-/*
- * obj must be locked before calling, qemud_driver does not matter
- *
- * To be called after completing the work associated with the
- * earlier qemuDomainBeginJob() call
- *
- * Returns remaining refcount on 'obj', maybe 0 to indicated it
- * was deleted
- */
-static int ATTRIBUTE_RETURN_CHECK qemuDomainObjEndJob(virDomainObjPtr obj)
-{
-    qemuDomainObjPrivatePtr priv = obj->privateData;
-
-    priv->jobActive = QEMU_JOB_NONE;
-    priv->jobSignals = 0;
-    memset(&priv->jobSignalsData, 0, sizeof(priv->jobSignalsData));
-    priv->jobStart = 0;
-    memset(&priv->jobInfo, 0, sizeof(priv->jobInfo));
-    virCondSignal(&priv->jobCond);
-
-    return virDomainObjUnref(obj);
-}
-
-
-/*
- * obj must be locked before calling, qemud_driver must be unlocked
- *
- * To be called immediately before any QEMU monitor API call
- * Must have already called qemuDomainObjBeginJob(), and checked
- * that the VM is still active.
- *
- * To be followed with qemuDomainObjExitMonitor() once complete
- */
-static void qemuDomainObjEnterMonitor(virDomainObjPtr obj)
-{
-    qemuDomainObjPrivatePtr priv = obj->privateData;
-
-    qemuMonitorLock(priv->mon);
-    qemuMonitorRef(priv->mon);
-    virDomainObjUnlock(obj);
-}
-
-
-/* obj must NOT be locked before calling, qemud_driver must be unlocked
- *
- * Should be paired with an earlier qemuDomainObjEnterMonitor() call
- */
-static void qemuDomainObjExitMonitor(virDomainObjPtr obj)
-{
-    qemuDomainObjPrivatePtr priv = obj->privateData;
-    int refs;
-
-    refs = qemuMonitorUnref(priv->mon);
-
-    if (refs > 0)
-        qemuMonitorUnlock(priv->mon);
-
-    virDomainObjLock(obj);
-
-    if (refs == 0) {
-        virDomainObjUnref(obj);
-        priv->mon = NULL;
-    }
-}
-
-
-/*
- * obj must be locked before calling, qemud_driver must be locked
- *
- * To be called immediately before any QEMU monitor API call
- * Must have already called qemuDomainObjBeginJob().
- *
- * To be followed with qemuDomainObjExitMonitorWithDriver() once complete
- */
-static void qemuDomainObjEnterMonitorWithDriver(struct qemud_driver *driver, virDomainObjPtr obj)
-{
-    qemuDomainObjPrivatePtr priv = obj->privateData;
-
-    qemuMonitorLock(priv->mon);
-    qemuMonitorRef(priv->mon);
-    virDomainObjUnlock(obj);
-    qemuDriverUnlock(driver);
-}
-
-
-/* obj must NOT be locked before calling, qemud_driver must be unlocked,
- * and will be locked after returning
- *
- * Should be paired with an earlier qemuDomainObjEnterMonitorWithDriver() call
- */
-static void qemuDomainObjExitMonitorWithDriver(struct qemud_driver *driver, virDomainObjPtr obj)
-{
-    qemuDomainObjPrivatePtr priv = obj->privateData;
-    int refs;
-
-    refs = qemuMonitorUnref(priv->mon);
-
-    if (refs > 0)
-        qemuMonitorUnlock(priv->mon);
-
-    qemuDriverLock(driver);
-    virDomainObjLock(obj);
-
-    if (refs == 0) {
-        virDomainObjUnref(obj);
-        priv->mon = NULL;
-    }
-}
-
-static void qemuDomainObjEnterRemoteWithDriver(struct qemud_driver *driver,
-                                               virDomainObjPtr obj)
-{
-    virDomainObjRef(obj);
-    virDomainObjUnlock(obj);
-    qemuDriverUnlock(driver);
-}
-
-static void qemuDomainObjExitRemoteWithDriver(struct qemud_driver *driver,
-                                              virDomainObjPtr obj)
-{
-    qemuDriverLock(driver);
-    virDomainObjLock(obj);
-    virDomainObjUnref(obj);
-}
-
 static int doStartCPUs(struct qemud_driver *driver, virDomainObjPtr vm, virConnectPtr conn)
 {
     int ret;
-- 
1.7.2.3


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]