January 2011 Archives by date
Starting: Sat Jan 1 10:33:55 UTC 2011
Ending: Mon Jan 31 23:57:35 UTC 2011
Messages: 1301
- [libvirt] libvirtd and listen_addr
Daniel Huhardeaux
- [libvirt] virsh + ssh
Daniel Huhardeaux
- [libvirt] Pre-release tarball of 0.8.7 to test
Daniel Veillard
- [libvirt] Pre-release tarball of 0.8.7 to test
Zdenek Styblik
- [libvirt] announce mailing list
Zdenek Styblik
- [libvirt] Pre-release tarball of 0.8.7 to test
Daniel Veillard
- [libvirt] announce mailing list
Daniel Veillard
- [libvirt] announce mailing list
Zdenek Styblik
- [libvirt] Pre-release tarball of 0.8.7 to test
Zdenek Styblik
- [libvirt] [PATCH] node_device: udev driver does not handle SR-IOV devices
Dave Allan
- [libvirt] [PATCH] bridge: Fix uninitialized variable
Jiri Denemark
- [libvirt] [PATCH] bridge: Fix uninitialized variable
Laine Stump
- [libvirt] [PATCH 2/2] qemu: use -incoming fd:n to avoid qemu holding fd indefinitely
Paolo Bonzini
- [libvirt] Implementing VNC per VM access control lists
Stefan Berger
- [libvirt] Pre-release tarball of 0.8.7 to test
Eric Blake
- [libvirt] [PATCH] build: satisfy 'make syntax-check' regarding year change
Eric Blake
- [libvirt] [PATCHv2] handle DNS over IPv6
Paweł Krześniak
- [libvirt] [PATCH] node_device: udev driver does not handle SR-IOV devices
Eric Blake
- [libvirt] [PATCH] build: avoid 'make syntax-check' failure
Eric Blake
- [libvirt] [PATCH] node_device: udev driver does not handle SR-IOV devices
Chris Wright
- [libvirt] adding smartcard support to libvirt
Eric Blake
- [libvirt] virsh help keywords vs. command prefixes
Paul Jenner
- [libvirt] virsh + ssh
Eric Blake
- [libvirt] Remove bashisms from libvirt-guests
Eric Blake
- [libvirt] virsh help keywords vs. command prefixes
Stefan Berger
- [libvirt] [PATCH] threadpool: Check for NULL jobdata
Eric Blake
- [libvirt] virsh help keywords vs. command prefixes
Eric Blake
- [libvirt] [PATCH] build: avoid compilation warnings
Eric Blake
- [libvirt] [PATCH] Support for qemu aio drive option
Eric Blake
- [libvirt] Release of libvirt-0.8.7
Daniel Veillard
- [libvirt] Release of libvirt-0.8.7
Justin Clift
- [libvirt] fork of php-libvirt
Justin Clift
- [libvirt] virsh help keywords vs. command prefixes
Justin Clift
- [libvirt] virsh + ssh
Justin Clift
- [libvirt] announce mailing list
Justin Clift
- [libvirt] [PATCH] build: avoid 'make syntax-check' failure
Justin Clift
- [libvirt] [PATCH] bridge: Fix uninitialized variable
Justin Clift
- [libvirt] Implementing VNC per VM access control lists
Neil Wilson
- [libvirt] virsh help keywords vs. command prefixes
Osier Yang
- [libvirt] adding smartcard support to libvirt
Alon Levy
- [libvirt] announce mailing list
Zdenek Styblik
- [libvirt] [PATCH] bridge: Fix uninitialized variable
Osier Yang
- [libvirt] [PATCH] bridge: Fix uninitialized variable
Jiri Denemark
- [libvirt] [PATCH] Support for qemu aio drive option
Chris Lalancette
- [libvirt] [PATCH] build: avoid 'make syntax-check' failure
Daniel Veillard
- [libvirt] [PATCH] qemu driver: use lseek64 for setting position in logfile
Stefan Berger
- [libvirt] [PATCH] qemu driver: use lseek64 for setting position in logfile
Stefan Berger
- [libvirt] [PATCH] build: avoid 'make syntax-check' failure
Eric Blake
- [libvirt] [PATCH 2/2] Cancel migration/dump if user presses Ctrl-C when migration/dump is in progress
Daniel P. Berrange
- [libvirt] Release of libvirt-0.8.7
Eric Blake
- [libvirt] [PATCH] [v2] API: Improve log for domain related APIs
Daniel P. Berrange
- [libvirt] [PATCH] bridge: Fix uninitialized variable
Laine Stump
- [libvirt] [PATCH] docs: Add additional indentation to level 3 menu items
Daniel P. Berrange
- [libvirt] [PATCH] bridge: Fix uninitialized variable
Laine Stump
- [libvirt] [PATCH] [v2] API: Improve log for domain related APIs
Osier Yang
- [libvirt] [PATCH 11/13] Update iptables.c to also support ip6tables.
Daniel P. Berrange
- [libvirt] [PATCH] [v2] API: Improve log for domain related APIs
Eric Blake
- [libvirt] [PATCH] [v2] API: Improve log for domain related APIs
Osier Yang
- [libvirt] [PATCH] bridge_driver: use conffile for dnsmasq if it exists
Daniel P. Berrange
- [libvirt] [PATCH] bridge_driver: use conffile for dnsmasq if it exists
Daniel P. Berrange
- [libvirt] [PATCH] bridge_driver: use conffile for dnsmasq if it exists
Daniel P. Berrange
- [libvirt] [PATCH] bridge: Fix uninitialized variable
Daniel P. Berrange
- [libvirt] [PATCH] Support <ipv[46]routing> network parameters
Daniel P. Berrange
- [libvirt] Implementing VNC per VM access control lists
Daniel P. Berrange
- [libvirt] [PATCH] qemu driver: use lseek64 for setting position in logfile
Eric Blake
- [libvirt] [PATCH] Support for qemu aio drive option
Daniel P. Berrange
- [libvirt] [PATCH] Support for qemu aio drive option
Eric Blake
- [libvirt] [PATCH v2] qemu driver: use lseek64 for setting position in logfile
Stefan Berger
- [libvirt] [PATCH] build: avoid 'make syntax-check' failure
Eric Blake
- [libvirt] [PATCH v2] qemu driver: use lseek64 for setting position in logfile
Eric Blake
- [libvirt] [PATCH 11/13] Update iptables.c to also support ip6tables.
Laine Stump
- [libvirt] [PATCH v2] qemu driver: use lseek64 for setting position in logfile
Daniel P. Berrange
- [libvirt] virsh + ssh
Eric Blake
- [libvirt] virsh + ssh
Daniel Huhardeaux
- [libvirt] [PATCH v2] qemu driver: use lseek64 for setting position in logfile
Eric Blake
- [libvirt] virsh + ssh
Daniel Huhardeaux
- [libvirt] hypervisor feature - hardware assisted paging
Jim Fehlig
- [libvirt] Release of libvirt-0.8.7
Justin Clift
- [libvirt] [PATCH v2] qemu driver: use lseek64 for setting position in logfile
Stefan Berger
- [libvirt] Remove bashisms from libvirt-guests
Laurent Léonard
- [libvirt] Release of libvirt-0.8.7
Zdenek Styblik
- [libvirt] Release of libvirt-0.8.7
Justin Clift
- [libvirt] [PATCH] esx: Add domain autostart support
Eric Blake
- [libvirt] [PATCH] docs: added libvirt-announce to contact page
Justin Clift
- [libvirt] [PATCH] esx: Move occurrence check into esxVI_LookupObjectContentByType
Eric Blake
- [libvirt] [PATCH] vbox: Use correct VRAM size unit
Eric Blake
- [libvirt] hypervisor feature - hardware assisted paging
Chris Lalancette
- [libvirt] [PATCH] docs: added libvirt-announce to contact page
Eric Blake
- [libvirt] announce mailing list
Eric Blake
- [libvirt] [PATCH] docs: added libvirt-announce to contact page
Justin Clift
- [libvirt] [PATCHv2] docs: added libvirt-announce to contact page
Justin Clift
- [libvirt] announce mailing list
Justin Clift
- [libvirt] RFC: exposing a config setting to force vhost-net support on/off
Laine Stump
- [libvirt] announce mailing list
Zdenek Styblik
- [libvirt] [PATCHv2] docs: added libvirt-announce to contact page
Eric Blake
- [libvirt] [PATCH] vmx: Add support for video device VRAM size
Eric Blake
- [libvirt] RFC: exposing a config setting to force vhost-net support on/off
Eric Blake
- [libvirt] [PATCH] esx: Add domain autostart support
Matthias Bolte
- [libvirt] Remove bashisms from libvirt-guests
Eric Blake
- [libvirt] Fwd: [PATCHv2] docs: added libvirt-announce to contact page
Justin Clift
- [libvirt] RFC: exposing a config setting to force vhost-net support on/off
Chris Wright
- [libvirt] [TCK] [PATCH v2] Test cases for network ipv6 support
Stefan Berger
- [libvirt] Remove bashisms from libvirt-guests
Laurent Léonard
- [libvirt] Remove bashisms from libvirt-guests
Eric Blake
- [libvirt] Remove bashisms from libvirt-guests
Laurent Léonard
- [libvirt] [PATCH] qemu driver: use lseek64 for setting position in logfile
Daniel Veillard
- [libvirt] [PATCH] qemu driver: use lseek64 for setting position in logfile
Stefan Berger
- [libvirt] [Patch v5 0/4] Add new feature into live migration
Wen Congyang
- [libvirt] [PATCH v5 1/4] move daemon/event.* into src/util/ directory
Wen Congyang
- [libvirt] [PATCH v5 2/4] test event when builing without libvirtd
Wen Congyang
- [libvirt] [PATCH v5 3/4] timer impl
Wen Congyang
- [libvirt] [PATCH v5 4/4] force guest to suspend at timeout
Wen Congyang
- [libvirt] Fwd: [PATCHv2] docs: added libvirt-announce to contact page
Daniel Veillard
- [libvirt] [TCK] [PATCH v2] Test cases for network ipv6 support
Laine Stump
- [libvirt] [PATCH] Improve error reporting when parsing dhcp info for virtual networks
Laine Stump
- [libvirt] [PATCH] Log an error on attempts to add a NAT rule for non-IPv4 addresses
Laine Stump
- [libvirt] [PATCHv2] docs: added libvirt-announce to contact page
Justin Clift
- [libvirt] Re: announce mailing list
Nicolas Sebrecht
- [libvirt] announce mailing list
Justin Clift
- [libvirt] announce mailing list
Zdenek Styblik
- [libvirt] announce mailing list
Zdenek Styblik
- [libvirt] [PATCHv2] docs: added libvirt-announce to contact page
Daniel P. Berrange
- [libvirt] RFC: exposing a config setting to force vhost-net support on/off
Daniel P. Berrange
- [libvirt] Release of libvirt-0.8.7
Zdenek Styblik
- [libvirt] [PATCH] [v2] API: Improve log for domain related APIs
Osier Yang
- [libvirt] Release of libvirt-0.8.7
Justin Clift
- [libvirt] Implementing VNC per VM access control lists
Neil Wilson
- [libvirt] Release of libvirt-0.8.7
Zdenek Styblik
- [libvirt] Implementing VNC per VM access control lists
Daniel P. Berrange
- [libvirt] Implementing VNC per VM access control lists
Neil Wilson
- [libvirt] Re: announce mailing list
Nicolas Sebrecht
- [libvirt] [PATCH] Device reattach: Check if device is assigned to guest before reattaching
Yufang Zhang
- [libvirt] [PATCH] virsh: print error in case of cellno is invalid
Osier Yang
- [libvirt] RFC: exposing a config setting to force vhost-net support on/off
Laine Stump
- [libvirt] [PATCH] qemu: Fix bogus warning about uninitialized saveptr
Jiri Denemark
- [libvirt] Release of libvirt-0.8.7
Laine Stump
- [libvirt] [PATCH] qemu: Fix bogus warning about uninitialized saveptr
Eric Blake
- [libvirt] [PATCH 01/15] Defines the basics of a generic RPC protocol in XDR
Daniel P. Berrange
- [libvirt] [PATCH] Improve error reporting when parsing dhcp info for virtual networks
Eric Blake
- [libvirt] [PATCH] Log an error on attempts to add a NAT rule for non-IPv4 addresses
Eric Blake
- [libvirt] [PATCH] [v2] API: Improve log for domain related APIs
Eric Blake
- [libvirt] announce mailing list
Eric Blake
- [libvirt] [PATCH] [v2] API: Improve log for domain related APIs
Daniel P. Berrange
- [libvirt] [PATCH] Improve error reporting when parsing dhcp info for virtual networks
Laine Stump
- [libvirt] [PATCH] Log an error on attempts to add a NAT rule for non-IPv4 addresses
Laine Stump
- [libvirt] [PATCH] virsh: print error in case of cellno is invalid
Eric Blake
- [libvirt] [PATCH] virsh: print error in case of cellno is invalid
Daniel P. Berrange
- [libvirt] [PATCH] maint: document dislike of mismatched if/else bracing
Eric Blake
- [libvirt] [PATCH] virsh: print error in case of cellno is invalid
Laine Stump
- [libvirt] [PATCH] maint: document dislike of mismatched if/else bracing
Daniel P. Berrange
- [libvirt] libvirt 0.8.7 msys and xdr weirdness
Justin Clift
- [libvirt] adding smartcard support to libvirt
Eric Blake
- [libvirt] [PATCH] bridge_driver: use conffile for dnsmasq if it exists
Paweł Krześniak
- [libvirt] [PATCH] bridge_driver: use conffile for dnsmasq if it exists
Paweł Krześniak
- [libvirt] adding smartcard support to libvirt
Alon Levy
- [libvirt] adding smartcard support to libvirt
Eric Blake
- [libvirt] [PATCH] Don't chown qemu saved image back to root after save if dynamic_ownership=0
Laine Stump
- [libvirt] [PATCH] Don't chown qemu saved image back to root after save if dynamic_ownership=0
Eric Blake
- [libvirt] [PATCH 0/4] Add HAP to domain features
Jim Fehlig
- [libvirt] [PATCH 1/4] Add HAP to virDomainFeature enum
Jim Fehlig
- [libvirt] [PATCH 2/4] Add support for HAP feature to xen drivers
Jim Fehlig
- [libvirt] [PATCH 3/4] Add HAP to xen hypervisor capabilities
Jim Fehlig
- [libvirt] [PATCH 4/4] Document HAP domain feature
Jim Fehlig
- [libvirt] adding smartcard support to libvirt
Eric Blake
- [libvirt] adding smartcard support to libvirt
Eric Blake
- [libvirt] [PATCH] schema: tighten <serial><protocol type=...> relaxNG
Eric Blake
- [libvirt] [TCK] [PATCH v2] Test cases for network ipv6 support
Stefan Berger
- [libvirt] [RFC: PATCH 1/n] smartcard: add XML support for <smartcard> device
Eric Blake
- [libvirt] [PATCH] [v2] API: Improve log for domain related APIs
Osier Yang
- [libvirt] [PATCH] virsh: print error in case of cellno is invalid
Osier Yang
- [libvirt] [PATCH] schema: tighten <serial><protocol type=...> relaxNG
Daniel Veillard
- [libvirt] [PATCH] wrong if-condition in bridge_driver.c, networkBuildDnsmasqArgv, dhcp host definition
Kay Schubert
- [libvirt] [PATCH] qemu: Fix bogus warning about uninitialized saveptr
Jiri Denemark
- [libvirt] [PATCH] qemu-monitor-command: hide the low level protocol
Lai Jiangshan
- [libvirt] [PATCH] Cancel migration/dump if user presses Ctrl-C when migration/dump is in progress
Hu Tao
- [libvirt] Fwd: libvirtd and listen_addr
Daniel Huhardeaux
- [libvirt] [PATCH] bridge_driver: use conffile for dnsmasq if it exists
Daniel P. Berrange
- [libvirt] [PATCH] Don't chown qemu saved image back to root after save if dynamic_ownership=0
Daniel P. Berrange
- [libvirt] [PATCH] qemu-monitor-command: hide the low level protocol
Daniel P. Berrange
- [libvirt] [PATCH] Cancel migration/dump if user presses Ctrl-C when migration/dump is in progress
Daniel P. Berrange
- [libvirt] adding smartcard support to libvirt
Alon Levy
- [libvirt] [PATCH 05/15] Generic module for handling SASL authentication & encryption
Daniel P. Berrange
- [libvirt] [PATCH] Refactor the security drivers to simplify usage
Daniel P. Berrange
- [libvirt] cgroup limits only affect kvm guest under certain conditions
Dominik Klein
- [libvirt] [RFC] Live disk snapshot API
Jiri Denemark
- [libvirt] cgroup limits only affect kvm guest under certain conditions
Daniel P. Berrange
- [libvirt] cgroup limits only affect kvm guest under certain conditions
Dominik Klein
- [libvirt] commandtest fails when executed with preloaded libraries
Diego Elio Pettenò
- [libvirt] commandtest fails when executed with preloaded libraries
Daniel P. Berrange
- [libvirt] Re: [RFC] Live disk snapshot API
Nicolas Sebrecht
- [libvirt] [PATCH] handle DNS over IPv6
Daniel P. Berrange
- [libvirt] [PATCHv2] handle DNS over IPv6
Daniel P. Berrange
- [libvirt] [PATCH] wrong if-condition in bridge_driver.c, networkBuildDnsmasqArgv, dhcp host definition
Jiri Denemark
- [libvirt] adding smartcard support to libvirt
Eric Blake
- [libvirt] [TCK] [PATCH v2] Test cases for network ipv6 support
Eric Blake
- [libvirt] adding smartcard support to libvirt
Daniel P. Berrange
- [libvirt] [TCK] [PATCH v2] Test cases for network ipv6 support
Daniel P. Berrange
- [libvirt] [PATCH] schema: tighten <serial><protocol type=...> relaxNG
Eric Blake
- [libvirt] Bug in virsh memtune on RHEL6?
Justin Clift
- [libvirt] [PATCH 03/15] Introduce a generic object for using network sockets
Daniel P. Berrange
- [libvirt] commandtest fails when executed with preloaded libraries
Eric Blake
- [libvirt] [RFC] Live disk snapshot API
Eric Blake
- [libvirt] [v3] API: Improve log for domain related APIs
Osier Yang
- [libvirt] Bug in virsh memtune on RHEL6?
Eric Blake
- [libvirt] Bug in virsh memtune on RHEL6?
Justin Clift
- [libvirt] [PATCH] Device reattach: Check if device is assigned to guest before reattaching
Osier Yang
- [libvirt] [PATCH] wrong if-condition in bridge_driver.c, networkBuildDnsmasqArgv, dhcp host definition
Laine Stump
- [libvirt] Bug in virsh memtune on RHEL6?
Justin Clift
- [libvirt] [PATCH] Don't chown qemu saved image back to root after save if dynamic_ownership=0
Laine Stump
- [libvirt] [PATCH] Don't chown qemu saved image back to root after save if dynamic_ownership=0
Laine Stump
- [libvirt] Fwd: libvirtd and listen_addr
Justin Clift
- [libvirt] Need a better word than "allocated" or "ascertained"
Justin Clift
- [libvirt] Need a better word than "allocated" or "ascertained"
Zdenek Styblik
- [libvirt] [v3] API: Improve log for domain related APIs
Eric Blake
- [libvirt] Need a better word than "allocated" or "ascertained"
Eric Blake
- [libvirt] Release of libvirt-0.8.7
Zdenek Styblik
- [libvirt] Fwd: libvirtd and listen_addr
Daniel Huhardeaux
- [libvirt] Need a better word than "allocated" or "ascertained"
Justin Clift
- [libvirt] Fwd: libvirtd and listen_addr
Daniel P. Berrange
- [libvirt] Fwd: libvirtd and listen_addr
Justin Clift
- [libvirt] [PATCH] vmx: Add support for video device VRAM size
Matthias Bolte
- [libvirt] [PATCH] vbox: Use correct VRAM size unit
Matthias Bolte
- [libvirt] Fwd: libvirtd and listen_addr
Daniel Huhardeaux
- [libvirt] Fwd: libvirtd and listen_addr
Justin Clift
- [libvirt] Fwd: libvirtd and listen_addr
Daniel P. Berrange
- [libvirt] Implementing VNC per VM access control lists
Neil Wilson
- [libvirt] Fwd: libvirtd and listen_addr
Justin Clift
- [libvirt] [PATCH] Refactor the security drivers to simplify usage
Eric Blake
- [libvirt] [PATCH] Refactor the security drivers to simplify usage
Eric Blake
- [libvirt] Implementing VNC per VM access control lists
Eric Blake
- [libvirt] Fwd: libvirtd and listen_addr
Daniel Huhardeaux
- [libvirt] [PATCH] docs: updated release of virsh cmd reference, with memtune info
Justin Clift
- [libvirt] Implementing VNC per VM access control lists
Eric Blake
- [libvirt] [PATCH] docs: updated release of virsh cmd reference, with memtune info
Justin Clift
- [libvirt] Release of libvirt-0.8.7
Zdenek Styblik
- [libvirt] [PATCH] build: let xgettext see strings in libvirt-guests.init
Eric Blake
- [libvirt] [TCK] [PATCH v2] Test cases for network ipv6 support
Stefan Berger
- [libvirt] Release of libvirt-0.8.7
Laine Stump
- [libvirt] [PATCH] commandtest: avoid printing loader-control variables from commandhelper
Diego Elio Pettenò
- [libvirt] [PATCHv2] handle DNS over IPv6
Paweł Krześniak
- [libvirt] [PATCH] commandtest: avoid printing loader-control variables from commandhelper
Eric Blake
- [libvirt] [PATCH] commandtest: avoid printing loader-control variables from commandhelper
Eric Blake
- [libvirt] [PATCH v2] esx: Add domain autostart support
Matthias Bolte
- [libvirt] Release of libvirt-0.8.7
Jim Fehlig
- [libvirt] [PATCH] maint: improve sc_prohibit_strncmp syntax check
Eric Blake
- [libvirt] [PATCH v2] esx: Add domain autostart support
Eric Blake
- [libvirt] Release of libvirt-0.8.7
Patrick Mullaney
- [libvirt] cgroup limits only affect kvm guest under certain conditions
KAMEZAWA Hiroyuki
- [libvirt] Bug in virsh memtune on RHEL6?
Nikunj A. Dadhania
- [libvirt] [v3] API: Improve log for domain related APIs
Osier Yang
- [libvirt] [PATCH] memtune: Let virsh know the unlimited value for memory tunables
Nikunj A. Dadhania
- [libvirt] Need a better word than "allocated" or "ascertained"
Nikunj A. Dadhania
- [libvirt] [PATCH V2] xen: check if device is assigned to guest before reattaching
Yufang Zhang
- [libvirt] cgroup limits only affect kvm guest under certain conditions
Dominik Klein
- [libvirt] Release of libvirt-0.8.7
Zdenek Styblik
- [libvirt] Release of libvirt-0.8.7
Laine Stump
- [libvirt] Need a better word than "allocated" or "ascertained"
Justin Clift
- [libvirt] Need a better word than "allocated" or "ascertained"
Zdenek Styblik
- [libvirt] Need a better word than "allocated" or "ascertained"
Nikunj A. Dadhania
- [libvirt] [PATCH] Add AM_MAINTAINER_MODE
Guido Günther
- [libvirt] [PATCHv2] handle DNS over IPv6
Daniel P. Berrange
- [libvirt] Implementing VNC per VM access control lists
Daniel P. Berrange
- [libvirt] [PATCH] daemon: Fix core dumps if unix_sock_group is set
Jiri Denemark
- [libvirt] Implementing VNC per VM access control lists
Neil Wilson
- [libvirt] Implementing VNC per VM access control lists
Neil Wilson
- [libvirt] Implementing VNC per VM access control lists
Daniel P. Berrange
- [libvirt] [PATCH] daemon: Fix core dumps if unix_sock_group is set
Daniel P. Berrange
- [libvirt] [PATCH] daemon: Fix core dumps if unix_sock_group is set
Jiri Denemark
- [libvirt] [PATCH v2] esx: Add domain autostart support
Matthias Bolte
- [libvirt] [PATCH] Fix instructions on 'vnc_password' to describe current behaviour
Neil Wilson
- [libvirt] [PATCH] Fix instructions on 'vnc_password' to describe current behaviour
Daniel P. Berrange
- [libvirt] [PATCH] Fix instructions on 'vnc_password' to describe current behaviour
Daniel P. Berrange
- [libvirt] [PATCH] Fix instructions on 'vnc_password' to describe current behaviour
Neil Wilson
- [libvirt] hypervisor feature - hardware assisted paging
Jim Fehlig
- [libvirt] [PATCH v3] Refactor the security drivers to simplify usage
Daniel P. Berrange
- [libvirt] [PATCH] Refactor the security drivers to simplify usage
Daniel P. Berrange
- [libvirt] [PATCH] Add AM_MAINTAINER_MODE
Eric Blake
- [libvirt] RFC: exposing a config setting to force vhost-net support on/off
Daniel P. Berrange
- [libvirt] [PATCH] esx: Move occurrence check into esxVI_LookupObjectContentByType
Matthias Bolte
- [libvirt] [PATCH v3] Refactor the security drivers to simplify usage
Eric Blake
- [libvirt] [PATCH] Add AM_MAINTAINER_MODE
Guido Günther
- [libvirt] [PATCH v3] Refactor the security drivers to simplify usage
Eric Blake
- [libvirt] RFC: exposing a config setting to force vhost-net support on/off
Laine Stump
- [libvirt] [PATCH 0/2] Update qemu password support
Marc-André Lureau
- [libvirt] [PATCH 1/2] qemu: add set_password and expire_password monitor commands
Marc-André Lureau
- [libvirt] [PATCH 2/2] qemu: Update password support in the QEMU driver
Marc-André Lureau
- [libvirt] libvirt 0.8.7 msys and xdr weirdness
Matthias Bolte
- [libvirt] [PATCH 2/2] qemu: Update password support in the QEMU driver
Jiri Denemark
- [libvirt] libvirt 0.8.7 msys and xdr weirdness
Eric Blake
- [libvirt] [PATCH] daemon: Fix core dumps if unix_sock_group is set
Eric Blake
- [libvirt] libvirt 0.8.7 msys and xdr weirdness
Justin Clift
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Justin Clift
- [libvirt] VirtualBox error message displayed on windows
Justin Clift
- [libvirt] Libvirt 0.8.7 installer ready for testing
Justin Clift
- [libvirt] [PATCH] conf: Report error if invalid type specified for character device
Osier Yang
- [libvirt] Fwd: libvirtd and listen_addr
Daniel Huhardeaux
- [libvirt] [PATCH] pass correct uri to source host when we do p2p migration
Wen Congyang
- [libvirt] [PATCH] Re: Minor php errors in the libvirt search script?
Daniel Veillard
- [libvirt] Need a better word than "allocated" or "ascertained"
Balbir Singh
- [libvirt] virsh save command will throw an error when used with qemu
oliver
- [libvirt] [PATCH] Switching on QEMU access control lists
Neil Wilson
- [libvirt] [PATCH v3] Refactor the security drivers to simplify usage
Daniel P. Berrange
- [libvirt] [PATCH] daemon: Fix core dumps if unix_sock_group is set
Jiri Denemark
- [libvirt] [PATCH] pass correct uri to source host when we do p2p migration
Daniel P. Berrange
- [libvirt] [PATCH 0/2] Update qemu password support (v2)
Marc-André Lureau
- [libvirt] [PATCH 1/2] qemu: add set_password and expire_password monitor commands
Marc-André Lureau
- [libvirt] [PATCH 2/2] Use the new set_password monitor command to set password.
Marc-André Lureau
- [libvirt] [PATCH] Re: Minor php errors in the libvirt search script?
Justin Clift
- [libvirt] Need a better word than "allocated" or "ascertained"
Zdenek Styblik
- [libvirt] Need a better word than "allocated" or "ascertained"
Justin Clift
- [libvirt] VirtualBox error message displayed on windows
Matthias Bolte
- [libvirt] Need a better word than "allocated" or "ascertained"
Balbir Singh
- [libvirt] [PATCH] vbox: Silently ignore missing registry key on Windows
Matthias Bolte
- [libvirt] [PATCH] Basic support for VDE networking
Renzo Davoli
- [libvirt] VirtualBox error message displayed on windows
Justin Clift
- [libvirt] Libvirt 0.8.7 installer ready for testing
Matthias Bolte
- [libvirt] Libvirt 0.8.7 installer ready for testing
Daniel P. Berrange
- [libvirt] [PATCH] qemu: Allow serving VNC over a unix domain socket
Cole Robinson
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Cole Robinson
- [libvirt] Need a better word than "allocated" or "ascertained"
Justin Clift
- [libvirt] [PATCH] vbox: Silently ignore missing registry key on Windows
Eric Blake
- [libvirt] [PATCH] conf: Report error if invalid type specified for character device
Eric Blake
- [libvirt] [PATCH] python: Use PyCapsule API if available
Cole Robinson
- [libvirt] [PATCH 0/8] events: Add helpers for driver dispatching
Cole Robinson
- [libvirt] [PATCH 1/8] remote: Don't lose track of events when callbacks are slow
Cole Robinson
- [libvirt] [PATCH 2/8] event-test: Simplify debug on/off
Cole Robinson
- [libvirt] [PATCH 3/8] domain_event: Add virDomainEventState structure
Cole Robinson
- [libvirt] [PATCH 4/8] domain_event: Add common domain event queue/flush helpers
Cole Robinson
- [libvirt] [PATCH 5/8] qemu: Use virDomainEventState helpers
Cole Robinson
- [libvirt] [PATCH 6/8] lxc: Use virDomainEventState helpers
Cole Robinson
- [libvirt] [PATCH 7/8] test: Use virDomainEventState helpers
Cole Robinson
- [libvirt] [PATCH 8/8] remote: Use virDomainEventState helpers
Cole Robinson
- [libvirt] [PATCH] qemu: Allow serving VNC over a unix domain socket
Eric Blake
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Eric Blake
- [libvirt] [PATCH 1/8] remote: Don't lose track of events when callbacks are slow
Eric Blake
- [libvirt] [PATCH 2/8] event-test: Simplify debug on/off
Eric Blake
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Cole Robinson
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Daniel P. Berrange
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Daniel P. Berrange
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Daniel P. Berrange
- [libvirt] [PATCH 3/8] domain_event: Add virDomainEventState structure
Eric Blake
- [libvirt] [PATCH] qemu: Allow serving VNC over a unix domain socket
Cole Robinson
- [libvirt] [PATCH] qemu: Allow serving VNC over a unix domain socket
Daniel P. Berrange
- [libvirt] [PATCH 4/8] domain_event: Add common domain event queue/flush helpers
Eric Blake
- [libvirt] [PATCH 5/8] qemu: Use virDomainEventState helpers
Eric Blake
- [libvirt] [PATCH 5/8] qemu: Use virDomainEventState helpers
Eric Blake
- [libvirt] [PATCH 6/8] lxc: Use virDomainEventState helpers
Eric Blake
- [libvirt] [PATCH 7/8] test: Use virDomainEventState helpers
Eric Blake
- [libvirt] [RFC] Live disk snapshot API
Daniel P. Berrange
- [libvirt] [PATCH 8/8] remote: Use virDomainEventState helpers
Eric Blake
- [libvirt] [PATCH] memtune: Let virsh know the unlimited value for memory tunables
Eric Blake
- [libvirt] [PATCH] python: Use PyCapsule API if available
Laine Stump
- [libvirt] [RFC] Live disk snapshot API
Daniel P. Berrange
- [libvirt] Need a better word than "allocated" or "ascertained"
Justin Clift
- [libvirt] Need a better word than "allocated" or "ascertained"
Eric Blake
- [libvirt] [PATCH 8/8] remote: Use virDomainEventState helpers
Cole Robinson
- [libvirt] Need a better word than "allocated" or "ascertained"
Justin Clift
- [libvirt] [PATCH] python: Use PyCapsule API if available
Cole Robinson
- [libvirt] [PATCH 0/6 v2] events: Add helpers for driver dispatching
Cole Robinson
- [libvirt] [PATCH 1/6] domain_event: Add virDomainEventState structure
Cole Robinson
- [libvirt] [PATCH 2/6] domain_event: Add common domain event queue/flush helpers
Cole Robinson
- [libvirt] [PATCH 3/6] qemu: Use virDomainEventState helpers
Cole Robinson
- [libvirt] [PATCH 4/6] lxc: Use virDomainEventState helpers
Cole Robinson
- [libvirt] [PATCH 5/6] test: Use virDomainEventState helpers
Cole Robinson
- [libvirt] [PATCH 6/6] remote: Use virDomainEventState helpers
Cole Robinson
- [libvirt] [PATCH] docs: updated memtune info again in virsh command reference
Justin Clift
- [libvirt] [PATCH] docs: updated memtune info again in virsh command reference
Justin Clift
- [libvirt] [PATCH 0/6 v2] events: Add helpers for driver dispatching
Eric Blake
- [libvirt] [PATCH] vbox: Silently ignore missing registry key on Windows
Justin Clift
- [libvirt] Libvirt 0.8.7 installer ready for testing
Justin Clift
- [libvirt] [PATCH] network: plug unininitialized read found by valgrind
Eric Blake
- [libvirt] [PATCH] network: plug memory leak
Eric Blake
- [libvirt] [PATCH] cpu: plug memory leak
Eric Blake
- [libvirt] [PATCH] pass correct uri to source host when we do p2p migration
Wen Congyang
- [libvirt] [PATCH] network: plug memory leak
Laine Stump
- [libvirt] esx driver: XML format for guest OS type/variant
Jake Xu
- [libvirt] [PATCH] network: plug unininitialized read found by valgrind
Laine Stump
- [libvirt] [PATCH] cpu: plug memory leak
Stefan Berger
- [libvirt] [Patch v5 0/4] Add new feature into live migration
Wen Congyang
- [libvirt] [PATCH] network: plug memory leak
Stefan Berger
- [libvirt] [PATCH] network: plug unininitialized read found by valgrind
Stefan Berger
- [libvirt] [PATCH] memtune: Let virsh know the unlimited value for memory tunables
Nikunj A. Dadhania
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Gerd Hoffmann
- [libvirt] [PATCH] pass correct uri to source host when we do p2p migration
Daniel P. Berrange
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Daniel P. Berrange
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Daniel P. Berrange
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Gerd Hoffmann
- [libvirt] [RFC] Live disk snapshot API
Daniel P. Berrange
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] [PATCH] Watchdog IB700 is not a PCI device (RHBZ#667091).
Richard W.M. Jones
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Richard W.M. Jones
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Justin Clift
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Daniel P. Berrange
- [libvirt] [RFC] Explicit boot device ordering
Jiri Denemark
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Richard W.M. Jones
- [libvirt] [RFC] Explicit boot device ordering
Richard W.M. Jones
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Cole Robinson
- [libvirt] [RFC] Explicit boot device ordering
Daniel P. Berrange
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Daniel P. Berrange
- [libvirt] [PATCH] pass correct uri to source host when we do p2p migration
Eric Blake
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Daniel P. Berrange
- [libvirt] [PATCH] Basic support for VDE networking
Renzo Davoli
- [libvirt] [PATCH] memtune: Let virsh know the unlimited value for memory tunables
Eric Blake
- [libvirt] [PATCH] cpu: plug memory leak
Eric Blake
- [libvirt] [PATCH] network: plug memory leak
Eric Blake
- [libvirt] [PATCH] network: plug unininitialized read found by valgrind
Eric Blake
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Eric Blake
- [libvirt] [RFC] Explicit boot device ordering
Jiri Denemark
- [libvirt] [PATCH] Watchdog IB700 is not a PCI device (RHBZ#667091).
Eric Blake
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] [PATCH] qemu: sound: Support intel 'hda' model
Cole Robinson
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Zdenek Styblik
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Justin Clift
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Zdenek Styblik
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Justin Clift
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Daniel P. Berrange
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Zdenek Styblik
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Justin Clift
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Zdenek Styblik
- [libvirt] Docs team task: Update main docs.html page with index of all pages
Justin Clift
- [libvirt] [PATCH] vbox: Silently ignore missing registry key on Windows
Matthias Bolte
- [libvirt] [PATCH] docs: add entry for archipel to the apps page
Justin Clift
- [libvirt] [PATCH] esx: Fix memory leak in HostSystem managed object free function
Matthias Bolte
- [libvirt] [PATCH] docs: add entry for archipel to the apps page
Eric Blake
- [libvirt] [PATCH] esx: Fix memory leak in HostSystem managed object free function
Eric Blake
- [libvirt] [PATCH] docs: add entry for archipel to the apps page
Justin Clift
- [libvirt] [PATCH] docs: use xml entity encoding for extended character last name
Justin Clift
- [libvirt] [PATCH] docs: use xml entity encoding for extended character last name
Justin Clift
- [libvirt] [PATCHv2] docs: add entry for archipel to the apps page
Justin Clift
- [libvirt] [PATCHv2] docs: add entry for archipel to the apps page
Eric Blake
- [libvirt] [PATCHv2] docs: add entry for archipel to the apps page
Justin Clift
- [libvirt] tests/daemon-conf bug
Eric Blake
- [libvirt] [PATCH] pass correct uri to source host when we do p2p migration
Wen Congyang
- [libvirt] [Patch v2 0/2] Some fixes about p2p migration
Wen Congyang
- [libvirt] [PATCH v2 1/2] report error when specifying wrong desturi
Wen Congyang
- [libvirt] [PATCH v2 2/2] doc: improve the documentation of desturi
Wen Congyang
- [libvirt] [PATCH] Cancel migration if user presses Ctrl-C when migration is in progress
Hu Tao
- [libvirt] [PATCH v3] memtune: Let virsh know the unlimited value for memory tunables
Nikunj A. Dadhania
- [libvirt] [PATCH] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] [v2] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] compressing .git/ can save 15%
Jim Meyering
- [libvirt] compressing .git/ can save 15%
Daniel Veillard
- [libvirt] tests/daemon-conf bug
Daniel P. Berrange
- [libvirt] compressing .git/ can save 15%
Jim Meyering
- [libvirt] compressing .git/ can save 15%
Daniel Veillard
- [libvirt] compressing .git/ can save 15%
Jim Meyering
- [libvirt] [v2] qemu: Reject SDL graphic if it's not supported by qemu
Daniel P. Berrange
- [libvirt] [PATCH v2 1/2] report error when specifying wrong desturi
Daniel P. Berrange
- [libvirt] [PATCH v2 2/2] doc: improve the documentation of desturi
Daniel P. Berrange
- [libvirt] [PATCH] Basic support for VDE networking
Daniel P. Berrange
- [libvirt] Best final spot for the in depth libvirt user docs?
Justin Clift
- [libvirt] Best final spot for the in depth libvirt user docs?
Richard W.M. Jones
- [libvirt] Best final spot for the in depth libvirt user docs?
Justin Clift
- [libvirt] [virt-tools-list] Best final spot for the in depth libvirt user docs?
Daniel P. Berrange
- [libvirt] [PATCH] docs: reorder apps page alphabetically, plus add libguestfs entries
Justin Clift
- [libvirt] [v2] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] [v3] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] [PATCH] Basic support for VDE networking
Justin Clift
- [libvirt] [PATCH] docs: reorder apps page alphabetically, plus add libguestfs entries
Eric Blake
- [libvirt] [PATCH] memtune: Let virsh know the unlimited value for memory tunables
Justin Clift
- [libvirt] [PATCH] virFindFileInPath: only find executable non-directory
Eric Blake
- [libvirt] [PATCH] docs: reorder apps page alphabetically, plus add libguestfs entries
Justin Clift
- [libvirt] [PATCH v2 2/2] doc: improve the documentation of desturi
Eric Blake
- [libvirt] [v3] qemu: Reject SDL graphic if it's not supported by qemu
Eric Blake
- [libvirt] [PATCH v3] memtune: Let virsh know the unlimited value for memory tunables
Eric Blake
- [libvirt] [PATCH 0/7] security: Allow disabling security per VM
Cole Robinson
- [libvirt] [PATCH 1/7] tests: Add qemuxml2xml tests for <seclabel> handling
Cole Robinson
- [libvirt] [PATCH 2/7] security: Use virDomainSeclabelDefClear
Cole Robinson
- [libvirt] [PATCH 3/7] security: Add virSecurityIsSpecifiedDriver
Cole Robinson
- [libvirt] [PATCH 4/7] qemu: Fix segfault if defining a domain without <seclabel>
Cole Robinson
- [libvirt] [PATCH 5/7] domain: Handle seclabel model with an enum
Cole Robinson
- [libvirt] [PATCH 6/7] domain: Always validate seclabel model
Cole Robinson
- [libvirt] [PATCH 7/7] security: Allow disabling security on a per VM basis
Cole Robinson
- [libvirt] [PATCH 0/3 v2] qemu: Allow serving VNC over a unix domain socket
Cole Robinson
- [libvirt] [PATCH 1/3] qemu: Set domain def transient at beginning of startup process
Cole Robinson
- [libvirt] [PATCH 2/3] qemu: Allow serving VNC over a unix domain socket
Cole Robinson
- [libvirt] [PATCH 3/3] qemu: Add conf option to auto setup VNC unix sockets
Cole Robinson
- [libvirt] [PATCH] virFindFileInPath: only find executable non-directory
Daniel P. Berrange
- [libvirt] [PATCH 0/7] security: Allow disabling security per VM
Daniel P. Berrange
- [libvirt] [PATCH] virFindFileInPath: only find executable non-directory
Eric Blake
- [libvirt] [PATCH 1/7] tests: Add qemuxml2xml tests for <seclabel> handling
Eric Blake
- [libvirt] [PATCHv2 1/2] virFindFileInPath: only find executable non-directory
Eric Blake
- [libvirt] [PATCHv2 2/2] tests: virsh is no longer in builddir/src
Eric Blake
- [libvirt] [PATCH 2/7] security: Use virDomainSeclabelDefClear
Eric Blake
- [libvirt] [PATCH 3/7] security: Add virSecurityIsSpecifiedDriver
Eric Blake
- [libvirt] [PATCH 4/7] qemu: Fix segfault if defining a domain without <seclabel>
Eric Blake
- [libvirt] [PATCH 5/7] domain: Handle seclabel model with an enum
Eric Blake
- [libvirt] [PATCH v3] memtune: Let virsh know the unlimited value for memory tunables
Matthias Bolte
- [libvirt] [PATCHv3] handle DNS over IPv6
Paweł Krześniak
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Justin Clift
- [libvirt] [PATCH] docs: fix trivial typos in currentMemory description
Justin Clift
- [libvirt] [PATCH 6/7] domain: Always validate seclabel model
Eric Blake
- [libvirt] [PATCH] esx: Fix memory leak in HostSystem managed object free function
Matthias Bolte
- [libvirt] [PATCH 7/7] security: Allow disabling security on a per VM basis
Eric Blake
- [libvirt] esx driver: XML format for guest OS type/variant
Justin Clift
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Eric Blake
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Justin Clift
- [libvirt] cont command failing via JSON monitor on restore
Jim Fehlig
- [libvirt] esx driver: XML format for guest OS type/variant
Eric Blake
- [libvirt] [PATCH 0/4] Add HAP to domain features
Jim Fehlig
- [libvirt] esx driver: XML format for guest OS type/variant
Matthias Bolte
- [libvirt] esx driver: XML format for guest OS type/variant
Matthias Bolte
- [libvirt] esx driver: XML format for guest OS type/variant
Matthias Bolte
- [libvirt] esx driver: XML format for guest OS type/variant
Eric Blake
- [libvirt] esx driver: XML format for guest OS type/variant
Richard W.M. Jones
- [libvirt] [PATCHv3] handle DNS over IPv6
Eric Blake
- [libvirt] openvzReadNetworkConf:318 : out of memory
Nathan Stratton
- [libvirt] esx driver: XML format for guest OS type/variant
Richard W.M. Jones
- [libvirt] [PATCH] build: restore mingw build
Eric Blake
- [libvirt] [PATCH] build: restore mingw build
Eric Blake
- [libvirt] [PATCH v2 2/2] doc: improve the documentation of desturi
Wen Congyang
- [libvirt] [v3] qemu: Reject SDL graphic if it's not supported by qemu
Osier Yang
- [libvirt] esx driver: XML format for guest OS type/variant
Jake Xu
- [libvirt] [PATCH] build: restore mingw build
Eric Blake
- [libvirt] cont command failing via JSON monitor on restore
Laine Stump
- [libvirt] [PATCH] Fix crash in SELinuxSecurityVerify
Laine Stump
- [libvirt] [PATCH] Fix crash in SELinuxSecurityVerify
Osier Yang
- [libvirt] [PATCH] Add XML config switch to enable/disable vhost-net support
Laine Stump
- [libvirt] [PATCH] Enable tuning of qemu network tap device "sndbuf" size
Laine Stump
- [libvirt] [PATCH v4] memtune: Let virsh know the unlimited value for memory tunables
Nikunj A. Dadhania
- [libvirt] [PATCH v4] memtune: Let virsh know the unlimited value for memory tunables
Matthias Bolte
- [libvirt] esx driver: XML format for guest OS type/variant
Matthias Bolte
- [libvirt] esx driver: XML format for guest OS type/variant
Richard W.M. Jones
- [libvirt] [PATCH v5] memtune: Let virsh know the unlimited value for memory tunables
Nikunj A. Dadhania
- [libvirt] esx driver: XML format for guest OS type/variant
Daniel P. Berrange
- [libvirt] [PATCH] Basic support for VDE networking
Renzo Davoli
- [libvirt] esx driver: XML format for guest OS type/variant
Daniel P. Berrange
- [libvirt] esx driver: XML format for guest OS type/variant
Matthias Bolte
- [libvirt] esx driver: XML format for guest OS type/variant
Richard W.M. Jones
- [libvirt] esx driver: XML format for guest OS type/variant
Matthias Bolte
- [libvirt] esx driver: XML format for guest OS type/variant
Daniel P. Berrange
- [libvirt] esx driver: XML format for guest OS type/variant
Daniel P. Berrange
- [libvirt] esx driver: XML format for guest OS type/variant
Daniel P. Berrange
- [libvirt] esx driver: XML format for guest OS type/variant
Richard W.M. Jones
- [libvirt] esx driver: XML format for guest OS type/variant
Matthias Bolte
- [libvirt] [PATCH 0/5] Explicit boot device ordering
Jiri Denemark
- [libvirt] [PATCH 1/5] conf: Move boot parsing into a separate function
Jiri Denemark
- [libvirt] [PATCH 2/5] Introduce per-device boot element
Jiri Denemark
- [libvirt] [PATCH 3/5] qemu: Refactor qemuCapsParsePCIDeviceStrs using virCommand
Jiri Denemark
- [libvirt] [PATCH 4/5] qemu: Support per-device boot ordering
Jiri Denemark
- [libvirt] [PATCH 5/5] tests: Add tests for per-device boot elements
Jiri Denemark
- [libvirt] esx driver: XML format for guest OS type/variant
Richard W.M. Jones
- [libvirt] [PATCH 1/6] domain_event: Add virDomainEventState structure
Daniel P. Berrange
- [libvirt] [PATCH 2/6] domain_event: Add common domain event queue/flush helpers
Daniel P. Berrange
- [libvirt] [PATCH 3/6] qemu: Use virDomainEventState helpers
Daniel P. Berrange
- [libvirt] [PATCH 3/3] qemu: Add conf option to auto setup VNC unix sockets
Daniel P. Berrange
- [libvirt] [PATCH 2/3] qemu: Allow serving VNC over a unix domain socket
Daniel P. Berrange
- [libvirt] [PATCH 1/3] qemu: Set domain def transient at beginning of startup process
Daniel P. Berrange
- [libvirt] [PATCH 1/4] Add HAP to virDomainFeature enum
Daniel P. Berrange
- [libvirt] [PATCH 2/4] Add support for HAP feature to xen drivers
Daniel P. Berrange
- [libvirt] [PATCH 3/4] Add HAP to xen hypervisor capabilities
Daniel P. Berrange
- [libvirt] [PATCH 4/4] Document HAP domain feature
Daniel P. Berrange
- [libvirt] cont command failing via JSON monitor on restore
Daniel P. Berrange
- [libvirt] [Patch v5 0/4] Add new feature into live migration
Daniel P. Berrange
- [libvirt] [PATCHv2 1/2] virFindFileInPath: only find executable non-directory
Daniel P. Berrange
- [libvirt] [PATCHv2 2/2] tests: virsh is no longer in builddir/src
Daniel P. Berrange
- [libvirt] [PATCHv4] PHYP: Adding network interface management
Eduardo Otubo
- [libvirt] [PATCH] Fix crash in SELinuxSecurityVerify
Daniel P. Berrange
- [libvirt] [PATCH 3/5] qemu: Refactor qemuCapsParsePCIDeviceStrs using virCommand
Eric Blake
- [libvirt] [PATCH 3/5] qemu: Refactor qemuCapsParsePCIDeviceStrs using virCommand
Jiri Denemark
- [libvirt] [PATCH] Fix crash in SELinuxSecurityVerify
Laine Stump
- [libvirt] [PATCH] Fix crash in SELinuxSecurityVerify
Eric Blake
- [libvirt] [PATCHv2 2/2] tests: virsh is no longer in builddir/src
Eric Blake
- [libvirt] [PATCH 3/6] qemu: Use virDomainEventState helpers
Cole Robinson
- [libvirt] [PATCH] Fix crash in SELinuxSecurityVerify
Laine Stump
- [libvirt] [PATCH v2] qemu: sound: Support intel 'ich6' model
Cole Robinson
- [libvirt] [PATCH 3/2] qemu: use lighter-weight fd:n on incoming tunneled migration
Eric Blake
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Justin Clift
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Daniel P. Berrange
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Justin Clift
- [libvirt] [PATCH] Fix crash in SELinuxSecurityVerify
Laine Stump
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Eric Blake
- [libvirt] [PATCH 1/7] tests: Add qemuxml2xml tests for <seclabel> handling
Daniel P. Berrange
- [libvirt] [PATCH 2/7] security: Use virDomainSeclabelDefClear
Daniel P. Berrange
- [libvirt] [PATCH 3/7] security: Add virSecurityIsSpecifiedDriver
Daniel P. Berrange
- [libvirt] [PATCH 4/7] qemu: Fix segfault if defining a domain without <seclabel>
Daniel P. Berrange
- [libvirt] [PATCH 1/4] Add HAP to virDomainFeature enum
Jim Fehlig
- [libvirt] [PATCH 5/7] domain: Handle seclabel model with an enum
Daniel P. Berrange
- [libvirt] [PATCH 5/7] domain: Handle seclabel model with an enum
Daniel P. Berrange
- [libvirt] [PATCH 6/7] domain: Always validate seclabel model
Daniel P. Berrange
- [libvirt] [PATCH 7/7] security: Allow disabling security on a per VM basis
Daniel P. Berrange
- [libvirt] [PATCH] virsh: ensure --maximum flag used only with --config for setvcpus
Justin Clift
- [libvirt] [PATCH] virsh: ensure --maximum flag used only with --config for setvcpus
Eric Blake
- [libvirt] [PATCH] virsh: ensure --maximum flag used only with --config for setvcpus
Justin Clift
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Justin Clift
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Eric Blake
- [libvirt] esx driver: XML format for guest OS type/variant
Jake Xu
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Justin Clift
- [libvirt] [PATCH] docs: clarify that virsh setvcpus and setmem only work on active domains
Eric Blake
- [libvirt] [PATCH 0/3] qemu: improve device capability detection
Eric Blake
- [libvirt] [PATCH 1/3] qemu: convert capabilities to use virCommand
Eric Blake
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Eric Blake
- [libvirt] [PATCH 3/3] smartcard: check for qemu capability
Eric Blake
- [libvirt] [PATCH 1/3] qemu: convert capabilities to use virCommand
Laine Stump
- [libvirt] [PATCH 1/3] qemu: convert capabilities to use virCommand
Eric Blake
- [libvirt] [PATCH v2] qemu: sound: Support intel 'ich6' model
Eric Blake
- [libvirt] [PATCH] docs: clarify virsh setvcpus and setmem usage with active domains
Justin Clift
- [libvirt] [PATCH] Add XML config switch to enable/disable vhost-net support
Eric Blake
- [libvirt] [PATCH] Enable tuning of qemu network tap device "sndbuf" size
Eric Blake
- [libvirt] cont command failing via JSON monitor on restore
Jim Fehlig
- [libvirt] [PATCH v2] qemu: sound: Support intel 'ich6' model
Cole Robinson
- [libvirt] [PATCH] util: add missing string->integer conversion functions
Eric Blake
- [libvirt] [PATCH 1/4] Add HAP to virDomainFeature enum
Eric Blake
- [libvirt] build failure on ubuntu
Eric Blake
- [libvirt] [RFC PATCHv2 0/5] Smartcard support
Eric Blake
- [libvirt] [RFC PATCHv2 1/5] domain_conf: split source data out from ChrDef
Eric Blake
- [libvirt] [RFC PATCHv2 2/5] qemu: move monitor device out of domain_conf common code
Eric Blake
- [libvirt] [RFC PATCHv2 3/5] smartcard: add XML support for <smartcard> device
Eric Blake
- [libvirt] [RFC PATCHv2 4/5] smartcard: add domain conf support
Eric Blake
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Eric Blake
- [libvirt] [PATCH] util: add missing string->integer conversion functions
Laine Stump
- [libvirt] build failure on ubuntu
Matthias Bolte
- [libvirt] [RFC PATCHv2 1/5] domain_conf: split source data out from ChrDef
Daniel P. Berrange
- [libvirt] [RFC PATCHv2 2/5] qemu: move monitor device out of domain_conf common code
Daniel P. Berrange
- [libvirt] [RFC PATCHv2 3/5] smartcard: add XML support for <smartcard> device
Daniel P. Berrange
- [libvirt] [RFC PATCHv2 4/5] smartcard: add domain conf support
Daniel P. Berrange
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Daniel P. Berrange
- [libvirt] [PATCH] cpu: Add support for Westmere CPU model
Jiri Denemark
- [libvirt] [PATCH] Add XML config switch to enable/disable vhost-net support
Daniel P. Berrange
- [libvirt] [PATCH] Enable tuning of qemu network tap device "sndbuf" size
Daniel P. Berrange
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Daniel P. Berrange
- [libvirt] [PATCH 3/3] qemu: Add conf option to auto setup VNC unix sockets
Cole Robinson
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Jiri Denemark
- [libvirt] virsh setmaxmem granularity for vSphere/ESX?
Justin Clift
- [libvirt] virsh setmaxmem granularity for vSphere/ESX?
Justin Clift
- [libvirt] OpenVZ and Libvirt
Nathan Stratton
- [libvirt] [PATCH] util: add missing string->integer conversion functions
Eric Blake
- [libvirt] [PATCH] cpu: Add support for Westmere CPU model
Eric Blake
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Eric Blake
- [libvirt] virsh setmem and setmaxmem: which XML do they match?
Justin Clift
- [libvirt] [PATCH 1/4] Add HAP to virDomainFeature enum
Jim Fehlig
- [libvirt] [PATCH 1/4] Add HAP to virDomainFeature enum
Eric Blake
- [libvirt] build failure on ubuntu
Eric Blake
- [libvirt] [PATCH v2] qemu: sound: Support intel 'ich6' model
Eric Blake
- [libvirt] [PATCH] Add XML config switch to enable/disable vhost-net support
Laine Stump
- [libvirt] [PATCH] cpu: Add support for Westmere CPU model
Jiri Denemark
- [libvirt] [PATCH] Add XML config switch to enable/disable vhost-net support
Laine Stump
- [libvirt] [PATCH v2 0/4] Explicit boot device ordering
Jiri Denemark
- [libvirt] [PATCH v2 1/4] conf: Move boot parsing into a separate function
Jiri Denemark
- [libvirt] [PATCH v2 2/4] Introduce per-device boot element
Jiri Denemark
- [libvirt] [PATCH v2 3/4] qemu: Support per-device boot ordering
Jiri Denemark
- [libvirt] [PATCH v2 4/4] tests: Add tests for per-device boot elements
Jiri Denemark
- [libvirt] [PATCH] Enable tuning of qemu network tap device "sndbuf" size
Laine Stump
- [libvirt] [PATCH] Enable tuning of qemu network tap device "sndbuf" size
Laine Stump
- [libvirt] [PATCH v2 1/4] conf: Move boot parsing into a separate function
Eric Blake
- [libvirt] [RFC PATCHv2 3/5] smartcard: add XML support for <smartcard> device
Eric Blake
- [libvirt] [PATCHv2] Add XML config switch to enable/disable vhost-net support
Laine Stump
- [libvirt] [PATCHv2] Enable tuning of qemu network tap device "sndbuf" size
Laine Stump
- [libvirt] [PATCH v2 2/4] Introduce per-device boot element
Eric Blake
- [libvirt] [RFC PATCHv2 4/5] smartcard: add domain conf support
Eric Blake
- [libvirt] [PATCH v2] qemu: sound: Support intel 'ich6' model
Eric Blake
- [libvirt] [PATCH v2] qemu: sound: Support intel 'ich6' model
Daniel P. Berrange
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Eric Blake
- [libvirt] [PATCH] Fix 'make check' after commit 04197350
Jim Fehlig
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Eric Blake
- [libvirt] [PATCH v2 3/4] qemu: Support per-device boot ordering
Eric Blake
- [libvirt] [PATCH] Fix 'make check' after commit 04197350
Eric Blake
- [libvirt] [PATCH v2 4/4] tests: Add tests for per-device boot elements
Eric Blake
- [libvirt] [PATCH] Fix 'make check' after commit 04197350
Jim Fehlig
- [libvirt] [PATCH 1/2] qemu: add set_password and expire_password monitor commands
Daniel P. Berrange
- [libvirt] [PATCH 2/2] Use the new set_password monitor command to set password.
Daniel P. Berrange
- [libvirt] [PATCHv2] Add XML config switch to enable/disable vhost-net support
Eric Blake
- [libvirt] [PATCH v2] qemu: sound: Support intel 'ich6' model
Daniel P. Berrange
- [libvirt] [PATCHv2] Add XML config switch to enable/disable vhost-net support
Laine Stump
- [libvirt] [PATCHv2] Enable tuning of qemu network tap device "sndbuf" size
Eric Blake
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Daniel P. Berrange
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Eric Blake
- [libvirt] [PATCH 2/2] Use the new set_password monitor command to set password.
Eric Blake
- [libvirt] [PATCHv2] Enable tuning of qemu network tap device "sndbuf" size
Laine Stump
- [libvirt] cont command failing via JSON monitor on restore
Laine Stump
- [libvirt] OpenVZ and Libvirt
Laine Stump
- [libvirt] [PATCH 0/7] patch queue cleanup
Eric Blake
- [libvirt] [PATCH 1/7] datatypes: avoid redundant __FUNCTION__
Eric Blake
- [libvirt] [PATCH 2/7] maint: improve sc_prohibit_strncmp syntax check
Eric Blake
- [libvirt] [PATCH 3/7] libvirt-guests: remove bashisms
Eric Blake
- [libvirt] [PATCH 4/7] build: let xgettext see strings in libvirt-guests
Eric Blake
- [libvirt] [PATCH 5/7] qemu: use -incoming fd:n to avoid qemu holding fd indefinitely
Eric Blake
- [libvirt] [PATCH 6/7] qemu: use lighter-weight fd:n on incoming tunneled migration
Eric Blake
- [libvirt] [PATCH 7/7] qemu: improve efficiency of dd during snapshots
Eric Blake
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Daniel P. Berrange
- [libvirt] cont command failing via JSON monitor on restore
Jim Fehlig
- [libvirt] [PATCH 1/7] datatypes: avoid redundant __FUNCTION__
Matthias Bolte
- [libvirt] [PATCH] virsh: Use WITH_SECDRIVER_APPARMOR to detect AppArmor support
Matthias Bolte
- [libvirt] [PATCH] tests: Remove obsolete secaatest
Matthias Bolte
- [libvirt] [PATCH] virsh: Use WITH_SECDRIVER_APPARMOR to detect AppArmor support
Eric Blake
- [libvirt] [PATCH] tests: Remove obsolete secaatest
Eric Blake
- [libvirt] [PATCH 2/7] maint: improve sc_prohibit_strncmp syntax check
Matthias Bolte
- [libvirt] [PATCH 1/7] datatypes: avoid redundant __FUNCTION__
Eric Blake
- [libvirt] [PATCH 2/7] maint: improve sc_prohibit_strncmp syntax check
Eric Blake
- [libvirt] [PATCH 0/3] qemu aio mode per disk
Eric Blake
- [libvirt] [PATCH 1/3] qemu aio: add XML parsing
Eric Blake
- [libvirt] [PATCH 2/3] qemu aio: parse aio support from qemu -help
Eric Blake
- [libvirt] [PATCH 3/3] qemu aio: enable support
Eric Blake
- [libvirt] [PATCHv4] PHYP: Adding network interface management
Eric Blake
- [libvirt] [PATCH v5] memtune: Let virsh know the unlimited value for memory tunables
Eric Blake
- [libvirt] [RFC PATCHv2 3/5] smartcard: add XML support for <smartcard> device
Alon Levy
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Alon Levy
- [libvirt] [PATCH] docs: Move the "Network Filtering" page one level up in the hierarchy
Matthias Bolte
- [libvirt] [PATCH] virsh: Use WITH_SECDRIVER_APPARMOR to detect AppArmor support
Matthias Bolte
- [libvirt] [PATCH 3/7] libvirt-guests: remove bashisms
Matthias Bolte
- [libvirt] [PATCH 4/7] build: let xgettext see strings in libvirt-guests
Matthias Bolte
- [libvirt] [PATCH 5/7] qemu: use -incoming fd:n to avoid qemu holding fd indefinitely
Matthias Bolte
- [libvirt] [PATCH] tests: Remove obsolete secaatest
Matthias Bolte
- [libvirt] [PATCH] datatypes: Get virSecretFreeName in sync with the other free functions
Matthias Bolte
- [libvirt] [PATCH] Add documentation for VIR_DOMAIN_MEMORY_PARAM_UNLIMITED
Matthias Bolte
- [libvirt] [PATCH] datatypes: Fix outdated function names in the documentation
Matthias Bolte
- [libvirt] [PATCH] Simplify "NWFilterPool" to "NWFilter"
Matthias Bolte
- [libvirt] [PATCH] Fix misuse of VIR_ERR_INVALID_* error code
Matthias Bolte
- [libvirt] [PATCH] Use VIR_ERR_OPERATION_INVALID when appropriated
Matthias Bolte
- [libvirt] [PATCH] Remove two unused PATH_MAX-sized char arrays from the stack
Matthias Bolte
- [libvirt] cont command failing via JSON monitor on restore
Laine Stump
- [libvirt] [PATCH] qemu: Error prompt if invalid dump image format specified
Osier Yang
- [libvirt] [PATCH v2 4/4] tests: Add tests for per-device boot elements
Jiri Denemark
- [libvirt] website: API reference for virterror contains libvirt API also
Matthias Bolte
- [libvirt] [RFC PATCHv2 3/5] smartcard: add XML support for <smartcard> device
Daniel P. Berrange
- [libvirt] [PATCH] docs: Move the "Network Filtering" page one level up in the hierarchy
Daniel P. Berrange
- [libvirt] [PATCH] datatypes: Get virSecretFreeName in sync with the other free functions
Daniel P. Berrange
- [libvirt] [PATCH] Add documentation for VIR_DOMAIN_MEMORY_PARAM_UNLIMITED
Daniel P. Berrange
- [libvirt] [PATCH] datatypes: Fix outdated function names in the documentation
Daniel P. Berrange
- [libvirt] [PATCH] Simplify "NWFilterPool" to "NWFilter"
Daniel P. Berrange
- [libvirt] [PATCH] Fix misuse of VIR_ERR_INVALID_* error code
Daniel P. Berrange
- [libvirt] [PATCH] Use VIR_ERR_OPERATION_INVALID when appropriated
Daniel P. Berrange
- [libvirt] [PATCH] Remove two unused PATH_MAX-sized char arrays from the stack
Daniel P. Berrange
- [libvirt] [PATCH] qemu: Error prompt if invalid dump image format specified
Daniel P. Berrange
- [libvirt] [PATCH v2 5/4] Check that boot order sequence is correct
Jiri Denemark
- [libvirt] [RFC PATCHv2 3/5] smartcard: add XML support for <smartcard> device
Alon Levy
- [libvirt] [RFC PATCHv2 3/5] smartcard: add XML support for <smartcard> device
Daniel P. Berrange
- [libvirt] [PATCH] qemu: Error prompt if invalid dump image format specified
Eric Blake
- [libvirt] [PATCH 4/7] build: let xgettext see strings in libvirt-guests
Eric Blake
- [libvirt] [PATCH v2 5/4] Check that boot order sequence is correct
Eric Blake
- [libvirt] [PATCH v2 2/4] Introduce per-device boot element
Daniel P. Berrange
- [libvirt] [PATCH] qemu: Error prompt if invalid dump image format specified
Osier Yang
- [libvirt] [PATCH v2 3/4] qemu: Support per-device boot ordering
Daniel P. Berrange
- [libvirt] [PATCH v2 4/4] tests: Add tests for per-device boot elements
Daniel P. Berrange
- [libvirt] [PATCH v2 5/4] Check that boot order sequence is correct
Daniel P. Berrange
- [libvirt] [PATCH v2 1/4] conf: Move boot parsing into a separate function
Daniel P. Berrange
- [libvirt] [PATCH v2 0/4] Explicit boot device ordering
Jiri Denemark
- [libvirt] [PATCH 5/7] qemu: use -incoming fd:n to avoid qemu holding fd indefinitely
Eric Blake
- [libvirt] [PATCH 6/7] qemu: use lighter-weight fd:n on incoming tunneled migration
Paolo Bonzini
- [libvirt] [PATCH] build: use more gnulib modules for simpler code
Eric Blake
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Eric Blake
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Alon Levy
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Eric Blake
- [libvirt] [PATCH] docs: document <controller> element
Eric Blake
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Wen Congyang
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Alon Levy
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Alon Levy
- [libvirt] Installing libvirt 0.8.7 Ubuntu 9.10
Marcela Castro León
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Eric Blake
- [libvirt] [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support
Eric Blake
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Eric Blake
- [libvirt] [PATCH] qemu: don't fail capabilities check on 0.12.x
Eric Blake
- [libvirt] [PATCHv3] handle DNS over IPv6
Laine Stump
- [libvirt] [PATCH 0/3] Misc fixes/cleanups to libvirt API entry points
Daniel P. Berrange
- [libvirt] [PATCH 1/3] Turn libvirt.c error reporting functions into macros
Daniel P. Berrange
- [libvirt] [PATCH 2/3] Increase size of driver table to make UML work again
Daniel P. Berrange
- [libvirt] [PATCH 3/3] Remove redundant brackets around return values
Daniel P. Berrange
- [libvirt] [PATCH 2/3] Increase size of driver table to make UML work again
Eric Blake
- [libvirt] Installing libvirt 0.8.7 Ubuntu 9.10
Justin Clift
- [libvirt] [PATCH 1/3] Turn libvirt.c error reporting functions into macros
Eric Blake
- [libvirt] [PATCH 3/3] Remove redundant brackets around return values
Eric Blake
- [libvirt] [PATCH] docs: updated windows page for new 0.8.7 installer
Justin Clift
- [libvirt] [PATCH] Avoid crash in security driver if model is NULL
Daniel P. Berrange
- [libvirt] [PATCH] Fix error reporting when machine type probe fails
Daniel P. Berrange
- [libvirt] cont command failing via JSON monitor on restore
Jim Fehlig
- [libvirt] [PATCH] docs: updated windows page for new 0.8.7 installer
Eric Blake
- [libvirt] [PATCH] Avoid crash in security driver if model is NULL
Eric Blake
- [libvirt] Libvirt 0.8.7 installer ready for testing
Justin Clift
- [libvirt] [PATCH] Fix error reporting when machine type probe fails
Eric Blake
- [libvirt] [PATCH] docs: updated windows page for new 0.8.7 installer
Justin Clift
- [libvirt] [PATCH] Fix startup with VNC password expiry on old QEMU
Daniel P. Berrange
- [libvirt] Libvirt Windows 0.8.7 installer available
Justin Clift
- [libvirt] [PATCH] docs: document <sysinfo> and <symbios> elements
Eric Blake
- [libvirt] [PATCH] Fix startup with VNC password expiry on old QEMU
Eric Blake
- [libvirt] [PATCH] qemu: don't fail capabilities check on 0.12.x
Matthias Bolte
- [libvirt] [PATCH] build: use more gnulib modules for simpler code
Matthias Bolte
- [libvirt] [PATCH] docs: add new conversion heading to the apps listing
Justin Clift
- [libvirt] [PATCH] docs: add new conversion heading to the apps listing
Eric Blake
- [libvirt] [PATCH] docs: add new conversion heading to the apps listing
Justin Clift
- [libvirt] [PATCH] docs: add buildbot to the apps page
Justin Clift
- [libvirt] [PATCH] qemu: don't fail capabilities check on 0.12.x
Eric Blake
- [libvirt] [PATCH] docs: add buildbot to the apps page
Eric Blake
- [libvirt] [PATCH] docs: add buildbot to the apps page
Justin Clift
- [libvirt] [PATCH] docs: document <controller> element
Matthias Bolte
- [libvirt] [PATCH] docs: document <sysinfo> and <symbios> elements
Matthias Bolte
- [libvirt] [PATCH] docs: document <controller> element
Eric Blake
- [libvirt] Installing libvirt 0.8.7 Ubuntu 9.10
Laurent Léonard
- [libvirt] [PATCH] Remove two unused PATH_MAX-sized char arrays from the stack
Matthias Bolte
- [libvirt] [PATCH] docs: document <controller> element
Matthias Bolte
- [libvirt] [PATCH] build: use more gnulib modules for simpler code
Eric Blake
- [libvirt] [PATCH] docs: document <sysinfo> and <symbios> elements
Eric Blake
- [libvirt] Spice in libvirt 0.8.x?
Justin Clift
- [libvirt] [PATCHv2] docs: document <controller> element
Eric Blake
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Justin Clift
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Wen Congyang
- [libvirt] [PATCH] qemu: don't fail capabilities check on 0.12.x
Wen Congyang
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Eric Blake
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Wen Congyang
- [libvirt] Installing libvirt 0.8.7 Ubuntu 9.10
Marcela Castro León
- [libvirt] [PATCH] Basic support for VDE networking
Justin Clift
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Osier Yang
- [libvirt] [PATCH 2/3] qemu: improve device flag parsing
Eric Blake
- [libvirt] [PATCH] spec: Start libvirt-guests only if it's on in current runlevel
Jiri Denemark
- [libvirt] virsh fails to define a domain
Nikunj A. Dadhania
- [libvirt] [PATCH] qemu: Fail if per-device boot is used but deviceboot is not supported
Jiri Denemark
- [libvirt] virsh fails to define a domain
Jiri Denemark
- [libvirt] [PATCH] spec: Start libvirt-guests only if it's on in current runlevel
Eric Blake
- [libvirt] [PATCH] qemu: Fail if per-device boot is used but deviceboot is not supported
Eric Blake
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Eric Blake
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Daniel P. Berrange
- [libvirt] cont command failing via JSON monitor on restore
Laine Stump
- [libvirt] [PATCH] spec: Start libvirt-guests only if it's on in current runlevel
Jiri Denemark
- [libvirt] [PATCH] qemu: Fail if per-device boot is used but deviceboot is not supported
Jiri Denemark
- [libvirt] How can I improve the performance of libvirt when running many virtual machines on same host
Diego Dias
- [libvirt] [PATCH] qemu: Avoid sending STOPPED event twice
Jiri Denemark
- [libvirt] [PATCH] qemu: Avoid sending STOPPED event twice
Daniel P. Berrange
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Matthias Bolte
- [libvirt] [PATCH] qemu: Avoid sending STOPPED event twice
Jiri Denemark
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Daniel P. Berrange
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Eric Blake
- [libvirt] How can I improve the performance of libvirt when running many virtual machines on same host
Daniel Veillard
- [libvirt] [PATCH] docs: added new entries to apps page, plus adjusted a few existing
Justin Clift
- [libvirt] [PATCH] docs: document <sysinfo> and <symbios> elements
Daniel Veillard
- [libvirt] [PATCH] docs: added new entries to apps page, plus adjusted a few existing
Daniel Veillard
- [libvirt] [PATCH] docs: added new entries to apps page, plus adjusted a few existing
Justin Clift
- [libvirt] cont command failing via JSON monitor on restore
Jim Fehlig
- [libvirt] virsh fails to define a domain
Nikunj A. Dadhania
- [libvirt] [RFC/PATCH v1] Adding entry for cpu tunable shares in xml
Nikunj A. Dadhania
- [libvirt] [PATCH] docs: move the apps page to the top level as its good promo
Justin Clift
- [libvirt] [PATCH] docs: move the apps page to the top level as its good promo
Daniel Veillard
- [libvirt] [PATCH] Re: Minor php errors in the libvirt search script?
Daniel Veillard
- [libvirt] [PATCH] docs: move the apps page to the top level as its good promo
Justin Clift
- [libvirt] [PATCH] Re: Minor php errors in the libvirt search script?
Justin Clift
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Marcela Castro León
- [libvirt] [RFD] Add/Modify some API functions about Host Information
Minoru Usui
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Matthias Bolte
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Osier Yang
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Marcela Castro León
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Marcela Castro León
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Justin Clift
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Marcela Castro León
- [libvirt] [PATCH] docs: move the apps page to the top level as its good promo
Daniel P. Berrange
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Justin Clift
- [libvirt] [PATCH] docs: move the apps page to the top level as its good promo
Justin Clift
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Marcela Castro León
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Zdenek Styblik
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Marcela Castro León
- [libvirt] [RFD] Add/Modify some API functions about Host Information
Zdenek Styblik
- [libvirt] [RFD] Add/Modify some API functions about Host Information
Daniel P. Berrange
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Zdenek Styblik
- [libvirt] Installing libvirt 0.8.6 Ubuntu 9.10
Justin Clift
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Michal Novotny
- [libvirt] Fwd: [PATCH] Add support for multiple serial ports to Xen driver
Michal Novotny
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Matthias Bolte
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Justin Clift
- [libvirt] [PATCHv2] docs: document <controller> element
Matthias Bolte
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Paolo Bonzini
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Michal Novotny
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Daniel P. Berrange
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Michal Novotny
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Daniel P. Berrange
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Michal Novotny
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Michal Novotny
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Paolo Bonzini
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Daniel P. Berrange
- [libvirt] [RFD] Add/Modify some API functions about Host Information
Eric Blake
- [libvirt] [PATCHv2] docs: document <controller> element
Eric Blake
- [libvirt] How can I improve the performance of libvirt when running many virtual machines on same host
Diego Dias
- [libvirt] cont command failing via JSON monitor on restore
Laine Stump
- [libvirt] [PATCH] maint: support --no-git option during autogen.sh
Eric Blake
- [libvirt] [PATCH] Add support for multiple serial ports to Xen driver
Michal Novotny
- [libvirt] [RFC] libxenlight driver
Jim Fehlig
- [libvirt] [PATCH] event: fix two event-handling bugs
Eric Blake
- [libvirt] [PATCH] [v2] qemu: Retry JSON monitor cont cmd on MigrationExpected error
Jim Fehlig
- [libvirt] [RFD] Add/Modify some API functions about Host Information
Minoru Usui
- [libvirt] [RFD] Add/Modify some API functions about Host Information
Minoru Usui
- [libvirt] [RFD] Add/Modify some API functions about Host Information
Minoru Usui
- [libvirt] [PATCH] event: fix two event-handling bugs
Daniel Veillard
- [libvirt] [PATCH] [v2] qemu: Retry JSON monitor cont cmd on MigrationExpected error
Daniel Veillard
- [libvirt] [PATCH] qemu: report more proper error for unsupported graphics
Osier Yang
- [libvirt] [PATCH] qemu: Fix a possible deadlock in p2p migration
Wen Congyang
- [libvirt] [PATCH] maint: support --no-git option during autogen.sh
Daniel Veillard
- [libvirt] [RFC] libxenlight driver
Daniel Veillard
- [libvirt] [PATCH] vmx: Use VIR_ERR_CONFIG_UNSUPPORTED when appropriated
Matthias Bolte
- [libvirt] [PATCH] qemu: report more proper error for unsupported graphics
Matthias Bolte
- [libvirt] [RFD] Add/Modify some API functions about Host Information
Daniel P. Berrange
- [libvirt] [RFC] libxenlight driver
Daniel P. Berrange
- [libvirt] [PATCH] event: fix two event-handling bugs
Daniel P. Berrange
- [libvirt] [PATCH] qemu: Fix a possible deadlock in p2p migration
Daniel P. Berrange
- [libvirt] [PATCH] vmx: Use VIR_ERR_CONFIG_UNSUPPORTED when appropriated
Daniel P. Berrange
- [libvirt] [PATCH] qemu: Fix a possible deadlock in p2p migration
Eric Blake
- [libvirt] [RFC] libxenlight driver
Jim Fehlig
- [libvirt] [PATCH] qemu: report more proper error for unsupported graphics
Eric Blake
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Gianni Tedesco
- [libvirt] [PATCH] [v2] qemu: Retry JSON monitor cont cmd on MigrationExpected error
Jim Fehlig
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Daniel P. Berrange
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Stefano Stabellini
- [libvirt] [PATCH] maint: support --no-git option during autogen.sh
Eric Blake
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Ian Campbell
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Stefano Stabellini
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Jim Fehlig
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Ian Campbell
- [libvirt] [PATCH] event: fix two event-handling bugs
Eric Blake
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Gianni Tedesco
- [libvirt] [PATCH 0/3] Yet another attempt at cleaning libvirtd error logging
Daniel P. Berrange
- [libvirt] [PATCH 1/3] Cleanup code style in logging APIs
Daniel P. Berrange
- [libvirt] [PATCH 2/3] Revert all previous error log priority hacks
Daniel P. Berrange
- [libvirt] [PATCH 3/3] Filter out certain expected error messages from libvirtd
Daniel P. Berrange
- [libvirt] [PATCH] Fix setup of lib directory with autogen.sh --system
Daniel P. Berrange
- [libvirt] [PATCH] Add check for poll error events in monitor
Daniel P. Berrange
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Ian Jackson
- [libvirt] [Xen-devel] Re: [RFC] libxenlight driver
Ian Jackson
- [libvirt] [PATCH] Fix setup of lib directory with autogen.sh --system
Eric Blake
- [libvirt] [PATCH] Add check for poll error events in monitor
Eric Blake
- [libvirt] [PATCH 1/3] Cleanup code style in logging APIs
Eric Blake
- [libvirt] [PATCH 2/3] Revert all previous error log priority hacks
Eric Blake
- [libvirt] [PATCH 3/3] Filter out certain expected error messages from libvirtd
Eric Blake
- [libvirt] [PATCHv2] event: fix two event-handling bugs
Eric Blake
- [libvirt] [PATCHv2] event: fix two event-handling bugs
Eric Blake
- [libvirt] [PATCH 3/3] qemu: Add conf option to auto setup VNC unix sockets
Cole Robinson
- [libvirt] [PATCH v2] qemu: sound: Support intel 'ich6' model
Cole Robinson
- [libvirt] [PATCH v2] qemu: sound: Support intel 'ich6' model
Cole Robinson
- [libvirt] [PATCH v3] qemu: sound: Support intel 'ich6' model
Cole Robinson
- [libvirt] [PATCH] build: fix 'make check' with older git
Eric Blake
- [libvirt] [PATCHv2] event: fix two event-handling bugs
Eric Blake
- [libvirt] [PATCH v3] qemu: sound: Support intel 'ich6' model
Eric Blake
- [libvirt] [PATCH] build: fix 'make check' with older git
Matthias Bolte
- [libvirt] [PATCH] vmx: Use VIR_ERR_CONFIG_UNSUPPORTED when appropriated
Matthias Bolte
- [libvirt] [PATCH] storage: Round up capacity for LVM volume creation
Osier Yang
- [libvirt] [PATCH] Add support for multiple serial ports into the Xen driver
Michal Novotny
- [libvirt] [PATCH] Add support for multiple serial ports into the Xen driver
Michal Novotny
- [libvirt] [PATCH 0/3] Add blkio cgroup support
Gui Jianfeng
- [libvirt] [PATCH 1/3] cgroup: Enable cgroup hierarchy for blkio cgroup
Gui Jianfeng
- [libvirt] [PATCH 2/3] cgroup: Implement blkio.weight tuning API.
Gui Jianfeng
- [libvirt] [PATCH 3/3] qemu: Implement blkio tunable XML configuration and parsing.
Gui Jianfeng
- [libvirt] [v1] remote: Add extra parameter client_pki_dir for URI
Osier Yang
- [libvirt] [PATCH 0/3] Add some new features into migration
Wen Congyang
- [libvirt] [PATCH 1/3] Cancel migration if user presses Ctrl-C when migration is in progress
Wen Congyang
- [libvirt] [PATCH 2/3] show mig progress
Wen Congyang
- [libvirt] [PATCH 3/3] force guest suspend at timeout
Wen Congyang
- [libvirt] [PATCH] storage: Round up capacity for LVM volume creation
Daniel Veillard
- [libvirt] [PATCH] storage: Round up capacity for LVM volume creation
Osier Yang
- [libvirt] [PATCH] Add support for multiple serial ports into the Xen driver
Michal Novotny
- [libvirt] [PATCH v3] qemu: sound: Support intel 'ich6' model
Daniel P. Berrange
- [libvirt] [v1] remote: Add extra parameter client_pki_dir for URI
Daniel P. Berrange
- [libvirt] [v1] remote: Add extra parameter client_pki_dir for URI
Osier Yang
- [libvirt] [v2] remote: Add extra parameter pkipath for URI
Osier Yang
- [libvirt] [PATCH] [v2] storage: Round up capacity for LVM volume creation
Osier Yang
- [libvirt] [PATCH 00/11] Integration of lock managers in QEMU driver (v2)
Daniel P. Berrange
- [libvirt] [PATCH 01/11] Block SIGPIPE around virExec hook functions
Daniel P. Berrange
- [libvirt] [PATCH 02/11] Reset logging filter function when forking
Daniel P. Berrange
- [libvirt] [PATCH 03/11] Move connection driver modules directory
Daniel P. Berrange
- [libvirt] [PATCH 04/11] Support leases in guest XML and lock manager
Daniel P. Berrange
- [libvirt] [PATCH 05/11] Allow handshake with child process during startup
Daniel P. Berrange
- [libvirt] [PATCH 06/11] Basic framework for lock manager plugins
Daniel P. Berrange
- [libvirt] [PATCH 07/11] Add a 'nop' lock driver implementation.
Daniel P. Berrange
- [libvirt] [PATCH 08/11] Add higher level lock API for domain objects
Daniel P. Berrange
- [libvirt] [PATCH 09/11] Add initial docs about the lock managers
Daniel P. Berrange
- [libvirt] [PATCH 10/11] Integrate the QEMU driver with the lock manager infrastructure
Daniel P. Berrange
- [libvirt] [PATCH 11/11] Add a plugin for the 'sanlock' project
Daniel P. Berrange
- [libvirt] [PATCH] Fix leak in SCSI storage backend
Daniel P. Berrange
- [libvirt] [PATCH] Fix leak of mutex attributes in POSIX threads impl
Daniel P. Berrange
- [libvirt] [PATCH] Fix leak of mutex attributes in POSIX threads impl
Eric Blake
- [libvirt] [PATCH] Fix leak in SCSI storage backend
Eric Blake
- [libvirt] [PATCH v4] qemu: sound: Support intel 'ich6' model
Cole Robinson
- [libvirt] [PATCH v4] qemu: sound: Support intel 'ich6' model
Eric Blake
- [libvirt] [PATCH v5] qemu: sound: Support intel 'ich6' model
Cole Robinson
- [libvirt] [PATCH v4] qemu: sound: Support intel 'ich6' model
Cole Robinson
- [libvirt] [PATCH v5] qemu: sound: Support intel 'ich6' model
Eric Blake
- [libvirt] [PATCH] Fix leak in SCSI storage backend
Dave Allan
- [libvirt] [PATCH v5] qemu: sound: Support intel 'ich6' model
Cole Robinson
- [libvirt] [PATCH 0/3] qemu aio mode per disk
Eric Blake
- [libvirt] Rudimentary (basic) s390x architecture functions for libvirt
Patrick Siegl
- [libvirt] [PATCH 1/1] Do not use virtio-serial port 0 for generic ports
David Allan
- [libvirt] [PATCH 1/1] Do not use virtio-serial port 0 for generic ports
Eric Blake
- [libvirt] [PATCH] build: avoid corrupted gnulib/tests/Makefile
Eric Blake
- [libvirt] [PATCH 1/3] Cancel migration if user presses Ctrl-C when migration is in progress
Eric Blake
- [libvirt] [PATCH 2/3] show mig progress
Eric Blake
- [libvirt] [PATCH] build: avoid corrupted gnulib/tests/Makefile
Daniel Veillard
- [libvirt] [PATCH 3/3] qemu: Implement blkio tunable XML configuration and parsing.
Nikunj A. Dadhania
- [libvirt] [PATCH 0/2] fix some bugs in libvirtd
Wen Congyang
- [libvirt] [PATCH 1/2] avoid vm to be deleted if qemuConnectMonitor failed
Wen Congyang
- [libvirt] [PATCH 2/2] avoid closing monitor twice
Wen Congyang
- [libvirt] [PATCH 1/3] Cancel migration if user presses Ctrl-C when migration is in progress
Wen Congyang
- [libvirt] [PATCH] qemu: Error prompt when managed save a shutoff domain
Osier Yang
- [libvirt] [PATCH] qemu: Error prompt when managed save a shutoff domain
Daniel Veillard
- [libvirt] [PATCH v2] qemu: Warning prompt if invalid dump image format specified
Osier Yang
- [libvirt] [PATCH 0/3] Fix selinux problem when restoring qemu domain via a pipe
Laine Stump
- [libvirt] [PATCH 1/3] Add a function to the security driver API that sets the label of an open fd.
Laine Stump
- [libvirt] [PATCH 2/3] Set SELinux context label of pipes used for qemu migration
Laine Stump
- [libvirt] [PATCH 3/3] Manually kill gzip if restore fails before starting qemu
Laine Stump
- [libvirt] [PATCH] dispatch error before return
Wen Congyang
- [libvirt] [PATCH 0/3] Add some new features into migration
Hu Tao
- [libvirt] [PATCH 1/3] Cancel migration if user presses Ctrl-C when migration is in progress
Hu Tao
- [libvirt] [PATCH 3/3] Force guest suspend at timeout
Hu Tao
- [libvirt] [PATCH 2/3] Show migration progress.
Hu Tao
- [libvirt] [PATCH] build: avoid corrupted gnulib/tests/Makefile
Eric Blake
- [libvirt] [PATCH 1/2] avoid vm to be deleted if qemuConnectMonitor failed
Eric Blake
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Justin Clift
- [libvirt] [PATCH] build: avoid corrupted gnulib/tests/Makefile
Serge E. Hallyn
- [libvirt] [PATCH 2/2] avoid closing monitor twice
Eric Blake
- [libvirt] [PATCH] qemu: Error prompt when managed save a shutoff domain
Eric Blake
- [libvirt] [PATCH v2] qemu: Warning prompt if invalid dump image format specified
Eric Blake
- [libvirt] [PATCH 2/2] avoid closing monitor twice
Daniel P. Berrange
- [libvirt] [PATCH 1/2] avoid vm to be deleted if qemuConnectMonitor failed
Daniel P. Berrange
- [libvirt] [PATCH] dispatch error before return
Eric Blake
- [libvirt] Rudimentary (basic) s390x architecture functions for libvirt
Daniel P. Berrange
- [libvirt] [PATCH] bugfix for https://bugzilla.redhat.com/show_bug.cgi?id=671050
Michal Privoznik
- [libvirt] [PATCH 3/3] Manually kill gzip if restore fails before starting qemu
Daniel P. Berrange
- [libvirt] [PATCH 1/3] Add a function to the security driver API that sets the label of an open fd.
Daniel P. Berrange
- [libvirt] [PATCH 2/3] Set SELinux context label of pipes used for qemu migration
Daniel P. Berrange
- [libvirt] [PATCH] bugfix for https://bugzilla.redhat.com/show_bug.cgi?id=671050
Eric Blake
- [libvirt] Rudimentary (basic) s390x architecture functions for libvirt
Patrick Siegl
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] fork of php-libvirt
Radek Hladik
- [libvirt] Move "Bindings" page under "Downloads" heading?
Justin Clift
- [libvirt] fork of php-libvirt
Radek Hladik
- [libvirt] fork of php-libvirt
Justin Clift
- [libvirt] fork of php-libvirt
Justin Clift
- [libvirt] Rudimentary (basic) s390x architecture functions for libvirt
Patrick Siegl
- [libvirt] l10n/i18n ~ po files and their cycle
Eric Blake
- [libvirt] Move "Bindings" page under "Downloads" heading?
Eric Blake
- [libvirt] l10n/i18n ~ po files and their cycle
Matthias Bolte
- [libvirt] [PATCH 3/3] Manually kill gzip if restore fails before starting qemu
Laine Stump
- [libvirt] [PATCH 2/3] Set SELinux context label of pipes used for qemu migration
Laine Stump
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] l10n/i18n ~ po files and their cycle
Laine Stump
- [libvirt] [PATCH 1/3] Add a function to the security driver API that sets the label of an open fd.
Laine Stump
- [libvirt] chardev aliases [was: [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support]
Eric Blake
- [libvirt] Interface XML description
arnaud.champion at devatom.fr
- [libvirt] [PATCHv3 0/5] smartcard: round 3
Eric Blake
- [libvirt] [PATCHv3 1/5] smartcard: add XML support for <smartcard> device
Eric Blake
- [libvirt] [PATCHv3 2/5] smartcard: add domain conf support
Eric Blake
- [libvirt] [PATCHv3 3/5] smartcard: check for qemu capability
Eric Blake
- [libvirt] [PATCHv3 4/5] smartcard: enable SELinux support
Eric Blake
- [libvirt] [PATCHv3 5/5] smartcard: turn on qemu support
Eric Blake
- [libvirt] [PATCH 2/2] avoid closing monitor twice
Wen Congyang
- [libvirt] [PATCH 2/2] avoid closing monitor twice
Wen Congyang
- [libvirt] l10n/i18n ~ po files and their cycle
Justin Clift
- [libvirt] [PATCH 3/3] qemu: Implement blkio tunable XML configuration and parsing.
Gui Jianfeng
- [libvirt] [PATCH] qemu: Error prompt when managed save a shutoff domain
Osier Yang
- [libvirt] l10n/i18n ~ po files and their cycle
Daniel Veillard
- [libvirt] Move "Bindings" page under "Downloads" heading?
Daniel Veillard
- [libvirt] [PATCH] docs: add a link to the bindings page under the downloads menu item
Justin Clift
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Justin Clift
- [libvirt] [PATCH] docs: add a link to the bindings page under the downloads menu item
Eric Blake
- [libvirt] [PATCH] docs: add a link to the bindings page under the downloads menu item
Justin Clift
- [libvirt] [PATCH] docs: add a link to the bindings page under the downloads menu item
Justin Clift
- [libvirt] [PATCHv3 0/5] smartcard: round 3
Alon Levy
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] Interface XML description
Zdenek Styblik
- [libvirt] l10n/i18n ~ po files and their cycle
Justin Clift
- [libvirt] Interface XML description
Justin Clift
- [libvirt] l10n/i18n ~ po files and their cycle
Justin Clift
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] [PATCH 2/2] avoid closing monitor twice
Daniel P. Berrange
- [libvirt] [PATCH v2] qemu: Warning prompt if invalid dump image format specified
Osier Yang
- [libvirt] [v2] remote: Add extra parameter pkipath for URI
Daniel P. Berrange
- [libvirt] [PATCH 2/3] Set SELinux context label of pipes used for qemu migration
Daniel P. Berrange
- [libvirt] [PATCH 3/3] Manually kill gzip if restore fails before starting qemu
Daniel P. Berrange
- [libvirt] l10n/i18n ~ po files and their cycle
Daniel P. Berrange
- [libvirt] [PATCH] docs: add a link to the bindings page under the downloads menu item
Daniel P. Berrange
- [libvirt] [PATCHv3 0/5] smartcard: round 3
Daniel P. Berrange
- [libvirt] [PATCHv3 1/5] smartcard: add XML support for <smartcard> device
Daniel P. Berrange
- [libvirt] [PATCHv3 2/5] smartcard: add domain conf support
Daniel P. Berrange
- [libvirt] [PATCHv3 3/5] smartcard: check for qemu capability
Daniel P. Berrange
- [libvirt] [PATCHv3 4/5] smartcard: enable SELinux support
Daniel P. Berrange
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] [PATCHv3 5/5] smartcard: turn on qemu support
Daniel P. Berrange
- [libvirt] chardev aliases [was: [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support]
Daniel P. Berrange
- [libvirt] [PATCH 0/3] Add some new features into migration
Daniel P. Berrange
- [libvirt] Rudimentary (basic) s390x architecture functions for libvirt
Daniel P. Berrange
- [libvirt] [PATCH 1/3] cgroup: Enable cgroup hierarchy for blkio cgroup
Daniel P. Berrange
- [libvirt] [PATCH 2/3] cgroup: Implement blkio.weight tuning API.
Daniel P. Berrange
- [libvirt] l10n/i18n ~ po files and their cycle
Justin Clift
- [libvirt] [PATCH 3/3] qemu: Implement blkio tunable XML configuration and parsing.
Daniel P. Berrange
- [libvirt] [v2] remote: Add extra parameter pkipath for URI
Matthias Bolte
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] l10n/i18n ~ po files and their cycle
Justin Clift
- [libvirt] l10n/i18n ~ po files and their cycle
Justin Clift
- [libvirt] Interface XML description
Laine Stump
- [libvirt] [PATCHv2] Manually kill gzip if restore fails before starting qemu
Laine Stump
- [libvirt] [PATCH 1/3] Add a function to the security driver API that sets the label of an open fd.
Laine Stump
- [libvirt] [PATCH 2/3] Set SELinux context label of pipes used for qemu migration
Laine Stump
- [libvirt] [v2] remote: Add extra parameter pkipath for URI
Daniel P. Berrange
- [libvirt] [PATCHv2] Manually kill gzip if restore fails before starting qemu
Daniel P. Berrange
- [libvirt] [PATCH 1/2] avoid vm to be deleted if qemuConnectMonitor failed
Daniel P. Berrange
- [libvirt] [PATCH 2/2] avoid closing monitor twice
Daniel P. Berrange
- [libvirt] [PATCHv3 1/5] smartcard: add XML support for <smartcard> device
Alon Levy
- [libvirt] [PATCHv3 0/5] smartcard: round 3
Alon Levy
- [libvirt] [PATCHv3 1/5] smartcard: add XML support for <smartcard> device
Daniel P. Berrange
- [libvirt] [PATCHv3 1/5] smartcard: add XML support for <smartcard> device
Alon Levy
- [libvirt] [PATCHv3 1/5] smartcard: add XML support for <smartcard> device
Eric Blake
- [libvirt] [PATCHv3 1/5] smartcard: add XML support for <smartcard> device
Alon Levy
- [libvirt] [PATCH] docs: correct setmem text plus expand setmaxmem text
Matthias Bolte
- [libvirt] [PATCH 3/3] qemu: Implement blkio tunable XML configuration and parsing.
Gui Jianfeng
- [libvirt] [PATCH 2/2] avoid closing monitor twice
Wen Congyang
- [libvirt] fork of php-libvirt
Lyre
- [libvirt] [v2] remote: Add extra parameter pkipath for URI
Osier Yang
- [libvirt] [PATCH] avoid shutting down the vm twice
Wen Congyang
- [libvirt] [PATCH 1/1] Do not use virtio-serial port 0 for generic ports
Dave Allan
- [libvirt] l10n/i18n ~ po files and their cycle
Daniel Veillard
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] [PATCH 0/4 v2] Add blkio cgroup support
Gui Jianfeng
- [libvirt] [PATCH 1/4] cgroup: Enable cgroup hierarchy for blkio cgroup
Gui Jianfeng
- [libvirt] [PATCH 2/4 v2] cgroup: Implement blkio.weight tuning API.
Gui Jianfeng
- [libvirt] [PATCH 3/4 v2] qemu: Implement blkio tunable XML configuration and parsing.
Gui Jianfeng
- [libvirt] [PATCH 4/4] LXC: LXC Blkio weight configuration support.
Gui Jianfeng
- [libvirt] l10n/i18n ~ po files and their cycle
Daniel Veillard
- [libvirt] [PATCH v3] remote: Add extra parameter pkipath for URI
Osier Yang
- [libvirt] fork of php-libvirt
Lyre
- [libvirt] l10n/i18n ~ po files and their cycle
Zdenek Styblik
- [libvirt] Planning for next release and discussions on project process
Daniel Veillard
- [libvirt] [PATCH] Report error more accurate if failes on attaching device.
Hu Tao
- [libvirt] Planning for next release and discussions on project process
Hu Tao
- [libvirt] [PATCH] [v2] storage: Round up capacity for LVM volume creation
Daniel Veillard
- [libvirt] [PATCH v3] remote: Add extra parameter pkipath for URI
Daniel Veillard
- [libvirt] [PATCH] cgroup : remove the ns_cgroup
Daniel Lezcano
- [libvirt] Planning for next release and discussions on project process
Daniel Veillard
- [libvirt] [PATCH] docs: Add docs for new extra parameter pkipath
Osier Yang
- [libvirt] [PATCH 0/2] Fix cpuMhz of virNodeGetInfo() don't returns maximum cpu frequency
Minoru Usui
- [libvirt] [PATCH 1/2] Get cpuMhz of virNodeGetInfo() from cpufreq/cpuinfo_max_freq, if exist
Minoru Usui
- [libvirt] [PATCH 2/2] Add test for nodeinfo-7 of nodeinfotest for cpu power saving environment.
Minoru Usui
- [libvirt] [PATCH] docs: fix incorrect XML element mentioned by setmem text
Justin Clift
- [libvirt] [PATCH] Prevent overfilling of self-pipe in python event loop
Daniel P. Berrange
- [libvirt] [PATCH] Prevent overfilling of self-pipe in python event loop
Daniel Veillard
- [libvirt] [PATCH] docs: Add docs for new extra parameter pkipath
Justin Clift
- [libvirt] [PATCH] docs: Add docs for new extra parameter pkipath
Osier Yang
- [libvirt] [PATCH v2] docs: Add docs for new extra parameter pkipath
Osier Yang
- [libvirt] [PATCH v2] docs: Add docs for new extra parameter pkipath
Justin Clift
- [libvirt] [PATCH v2] docs: Add docs for new extra parameter pkipath
Osier Yang
- [libvirt] [PATCH] docs: expand the man page text for virsh setmaxmem
Justin Clift
- [libvirt] [PATCHv2] event: fix two event-handling bugs
Daniel P. Berrange
- [libvirt] [PATCH] docs: expand the man page text for virsh setmaxmem
Matthias Bolte
- [libvirt] [PATCH] docs: expand the man page text for virsh setmaxmem
Eric Blake
- [libvirt] [PATCH] docs: expand the man page text for virsh setmaxmem
Justin Clift
- [libvirt] [PATCHv2] event: fix two event-handling bugs
Eric Blake
- [libvirt] [PATCH] docs: expand the man page text for virsh setmaxmem
Justin Clift
- [libvirt] [PATCH] docs: expand the man page text for virsh setmaxmem
Eric Blake
- [libvirt] [PATCH 1/1] Do not use virtio-serial port 0 for generic ports
Eric Blake
- [libvirt] [PATCH] docs: expand the man page text for virsh setmaxmem
Justin Clift
- [libvirt] [PATCH] Imprint all logs with version + package build information
Daniel P. Berrange
- [libvirt] beginner's project
Eric Blake
- [libvirt] [PATCH] Remove double close of qemu monitor
Daniel P. Berrange
- [libvirt] [PATCH] tests: Fix virtio channel tests
Jiri Denemark
- [libvirt] [PATCH] Remove bogus log warning lines when launching QEMU
Daniel P. Berrange
- [libvirt] [PATCH] Remove bogus log warning lines when launching QEMU
Daniel P. Berrange
- [libvirt] [PATCH] Remove double close of qemu monitor
Eric Blake
- [libvirt] [PATCH] Remove bogus log warning lines when launching QEMU
Eric Blake
- [libvirt] [PATCH] tests: Fix virtio channel tests
Eric Blake
- [libvirt] Domain callback, the new way
arnaud.champion at devatom.fr
- [libvirt] [PATCH] Imprint all logs with version + package build information
Eric Blake
- [libvirt] [PATCH] tests: Fix virtio channel tests
Jiri Denemark
- [libvirt] Domain callback, the new way
arnaud.champion at devatom.fr
- [libvirt] [PATCH 1/2] avoid vm to be deleted if qemuConnectMonitor failed
Eric Blake
- [libvirt] [PATCH] avoid shutting down the vm twice
Eric Blake
- [libvirt] [PATCH v2] qemu: Warning prompt if invalid dump image format specified
Eric Blake
- [libvirt] chardev aliases [was: [RFC PATCHv2 5/5] WIP: smartcard: turn on qemu support]
Eric Blake
- [libvirt] syntax-check vs. close [was: [PATCH 1/3] Cancel migration if user presses Ctrl-C when migration is in progress]
Eric Blake
- [libvirt] [PATCH] esx: Don't try to change max-memory of an active domain
Matthias Bolte
- [libvirt] Rudimentary (basic) s390x architecture functions for libvirt
Patrick Siegl
- [libvirt] [PATCH] esx: Don't try to change max-memory of an active domain
Eric Blake
- [libvirt] [PATCH 0/3] Add some new features into migration
Eric Blake
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] [PATCH 3/3] qemu: Add conf option to auto setup VNC unix sockets
Eric Blake
- [libvirt] [PATCH v2] docs: Add docs for new extra parameter pkipath
Daniel Veillard
- [libvirt] [PATCH] Report error more accurate if failes on attaching device.
Eric Blake
- [libvirt] [PATCH] Report error more accurate if failes on attaching device.
Eric Blake
- [libvirt] [PATCH] qemu: fix error messages
Eric Blake
- [libvirt] [PATCH v2] docs: Add docs for new extra parameter pkipath
Eric Blake
- [libvirt] [PATCH] Report error more accurate if failes on attaching device.
Hu Tao
- [libvirt] [PATCH v2] docs: Add docs for new extra parameter pkipath
Osier Yang
- [libvirt] [PATCH 3/4 v2] qemu: Implement blkio tunable XML configuration and parsing.
Nikunj A. Dadhania
- [libvirt] [PATCH 4/4] LXC: LXC Blkio weight configuration support.
Nikunj A. Dadhania
- [libvirt] [PATCH v2] docs: Add docs for new extra parameter pkipath
Justin Clift
- [libvirt] [PATCH] esx: Don't try to change max-memory of an active domain
Justin Clift
- [libvirt] [RFC/PATCH REPOST] Adding persistent entry for cpu tunable
Nikunj A. Dadhania
- [libvirt] [RFC/PATCH REPOST] Adding persistent entry for cpu tunable
Osier Yang
- [libvirt] [RFC/PATCH v2] Adding persistent entry for cpu tunable
Nikunj A. Dadhania
- [libvirt] [PATCH 0/4 v2] Add blkio cgroup support
Matthias Bolte
- [libvirt] [PATCH 0/4 v2] Add blkio cgroup support
Gui Jianfeng
- [libvirt] [PATCH 0/4 v2] Add blkio cgroup support
Osier Yang
- [libvirt] C# bindings need and advice from the experts
arnaud.champion at devatom.fr
- [libvirt] Raising events for testing
Daniel P. Berrange
- [libvirt] [PATCH] virsh: Error prompt if one passes negative value for scheduler setting
Osier Yang
- [libvirt] [PATCH] virsh: Error prompt if one passes negative value for scheduler setting
Daniel P. Berrange
- [libvirt] [PATCH] virsh: Error prompt if one passes negative value for scheduler setting
Osier Yang
- [libvirt] [PATCH] docs: replace CRLF with LF
Juerg Haefliger
- [libvirt] [PATCH] Split all QEMU process mangement code into separate file
Daniel P. Berrange
- [libvirt] [PATCH] Move all the QEMU migration code to a new file
Daniel P. Berrange
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] [PATCH 1/3] qemu aio: add XML parsing
Daniel P. Berrange
- [libvirt] [PATCH 2/3] qemu aio: parse aio support from qemu -help
Daniel P. Berrange
- [libvirt] [PATCH 3/3] qemu aio: enable support
Daniel P. Berrange
- [libvirt] Raising events for testing
Daniel P. Berrange
- [libvirt] [PATCH] virsh: Error prompt if one passes negative value for scheduler setting
Eric Blake
- [libvirt] [PATCH] cgroup : remove the ns_cgroup
Daniel P. Berrange
- [libvirt] [PATCH] virsh: Error prompt if one passes negative value for scheduler setting
Daniel P. Berrange
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] [PATCH] docs: replace CRLF with LF
Eric Blake
- [libvirt] l10n/i18n ~ po files and their cycle
Eric Blake
- [libvirt] [PATCH] docs: replace CRLF with LF
Jim Meyering
- [libvirt] [PATCH] docs: replace CRLF with LF
Eric Blake
- [libvirt] l10n/i18n ~ po files and their cycle
Eric Blake
- [libvirt] [PATCH 3/3] qemu aio: enable support
Eric Blake
- [libvirt] [PATCH 01/11] Block SIGPIPE around virExec hook functions
Eric Blake
- [libvirt] [PATCH 2/3] cgroup: Implement blkio.weight tuning API.
Eric Blake
- [libvirt] [PATCH] virsh: added --all flag to freecell command
Michal Privoznik
- [libvirt] [PATCH 01/11] Block SIGPIPE around virExec hook functions
Daniel P. Berrange
- [libvirt] [PATCH] virsh: added --all flag to freecell command
Eric Blake
- [libvirt] [PATCH 02/11] Reset logging filter function when forking
Eric Blake
- [libvirt] [PATCH 03/11] Move connection driver modules directory
Eric Blake
- [libvirt] [PATCH 04/11] Support leases in guest XML and lock manager
Eric Blake
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] [PATCH v2] virsh: added --all flag to freecell command
Michal Privoznik
- [libvirt] draft ~ l10n/i18n
Zdenek Styblik
- [libvirt] Google Summer of Code 2011
Luiz Capitulino
- [libvirt] [PATCH] esx: Don't try to change max-memory of an active domain
Matthias Bolte
- [libvirt] [PATCH] qemu: fix augeas support for vnc_auto_unix_socket
Eric Blake
- [libvirt] [PATCH] Add VIR_DIV_UP to divide memory or storage request sizes with round up
Matthias Bolte
- [libvirt] [PATCH] esx: Ensure max-memory has 4 megabyte granularity
Matthias Bolte
- [libvirt] [PATCH] Prefer C style comments over C++ ones
Matthias Bolte
- [libvirt] [PATCH] esx: Ensure max-memory has 4 megabyte granularity
Eric Blake
- [libvirt] [PATCH] Prefer C style comments over C++ ones
Eric Blake
- [libvirt] [PATCH] Add VIR_DIV_UP to divide memory or storage request sizes with round up
Eric Blake
- [libvirt] [PATCH 0/2] make syntax-check detect raw close
Eric Blake
- [libvirt] [PATCH 1/2] build: avoid close, system
Eric Blake
- [libvirt] [PATCH 2/2] maint: reject raw close, popen in 'make syntax-check'
Eric Blake
- [libvirt] [PATCH v2] virsh: added --all flag to freecell command
Eric Blake
- [libvirt] [PATCH] qemu: fix augeas support for vnc_auto_unix_socket
Matthias Bolte
- [libvirt] [PATCH] qemu: fix augeas support for vnc_auto_unix_socket
Eric Blake
- [libvirt] [PATCH 1/2] build: avoid close, system
Matthias Bolte
- [libvirt] [PATCH] Add VIR_DIV_UP to divide memory or storage request sizes with round up
Eric Blake
- [libvirt] [PATCH 2/2] maint: reject raw close, popen in 'make syntax-check'
Matthias Bolte
- [libvirt] [PATCH 1/2] build: avoid close, system
Eric Blake
- [libvirt] [PATCH 1/2] build: avoid close, system
Matthias Bolte
- [libvirt] [PATCHv2 1/2] build: avoid close, system
Eric Blake
- [libvirt] [PATCH 2/2] maint: reject raw close, popen in 'make syntax-check'
Eric Blake
- [libvirt] [PATCH] Add VIR_DIV_UP to divide memory or storage request sizes with round up
Matthias Bolte
- [libvirt] [PATCH] Prefer C style comments over C++ ones
Matthias Bolte
- [libvirt] [PATCH] esx: Ensure max-memory has 4 megabyte granularity
Matthias Bolte
- [libvirt] [PATCH] virsh: Error prompt if one passes negative value for scheduler setting
Osier Yang
- [libvirt] [PATCHv2 1/2] build: avoid close, system
Matthias Bolte
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] [PATCH] virsh: Error prompt if one passes negative value for scheduler setting
Eric Blake
- [libvirt] [PATCHv2 1/2] build: avoid close, system
Eric Blake
- [libvirt] [PATCH] Split all QEMU process mangement code into separate file
Eric Blake
- [libvirt] [PATCH] Move all the QEMU migration code to a new file
Eric Blake
- [libvirt] [PATCH] docs: update docs for cpu_shares setting
Osier Yang
- [libvirt] [PATCH] qemu: Build command line for incoming tunneled migration
Osier Yang
- [libvirt] [PATCH] qemu: Build command line for incoming tunneled migration
Osier Yang
- [libvirt] [PATCH] qemu: More clear error parsing domain def failure of tunneled migration
Osier Yang
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] [PATCH] qemu: More clear error parsing domain def failure of tunneled migration
Justin Clift
- [libvirt] Rudimentary (basic) s390x architecture functions for libvirt
Patrick Siegl
- [libvirt] Google Summer of Code 2011
Alexander Graf
- [libvirt] [PATCH] qemu: More clear error parsing domain def failure of tunneled migration
Osier Yang
- [libvirt] [PATCH] init cont->idx correctly
Wen Congyang
- [libvirt] [PATCH] qemu: More clear error parsing domain def failure of tunneled migration
Daniel Veillard
- [libvirt] [PATCH] init cont->idx correctly
Daniel Veillard
- [libvirt] [PATCH] qemu: More clear error parsing domain def failure of tunneled migration
Osier Yang
- [libvirt] [PATCH] storage: Allow to delete device mapper disk partition
Osier Yang
- [libvirt] [PATCH] qemu: More clear error parsing domain def failure of tunneled migration
Daniel P. Berrange
- [libvirt] [PATCH] Split all QEMU process mangement code into separate file
Daniel P. Berrange
- [libvirt] [PATCH] Move all the QEMU migration code to a new file
Daniel P. Berrange
- [libvirt] callback question
arnaud.champion at devatom.fr
- [libvirt] Google Summer of Code 2011
Luiz Capitulino
- [libvirt] callback question
Daniel P. Berrange
- [libvirt] [PATCH] tests: handle backspace-newline pairs in test input files
Haefliger, Juerg
- [libvirt] callback question
arnaud.champion at devatom.fr
- [libvirt] fork of php-libvirt
Michal Novotny
- [libvirt] [PATCH] qemu: More clear error parsing domain def failure of tunneled migration
Osier Yang
- [libvirt] interface description
arnaud.champion at devatom.fr
- [libvirt] [PATCH] docs: update docs for cpu_shares setting
Eric Blake
- [libvirt] Raising events for testing
Eric Blake
- [libvirt] Raising events for testing
Daniel P. Berrange
- [libvirt] [PATCH] tests: handle backspace-newline pairs in test input files
Eric Blake
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] interface description
Laine Stump
- [libvirt] [PATCH] Split all QEMU process mangement code into separate file
Eric Blake
- [libvirt] Raising events for testing
Eric Blake
- [libvirt] Raising events for testing
arnaud.champion at devatom.fr
- [libvirt] [PATCHv4] bridge_driver: handle DNS over IPv6
Paweł Krześniak
- [libvirt] [PATCH] Move all the QEMU migration code to a new file
Eric Blake
- [libvirt] [PATCH] qemu: Build command line for incoming tunneled migration
Eric Blake
- [libvirt] [PATCH] qemu: Build command line for incoming tunneled migration
Eric Blake
- [libvirt] [PATCH] storage: Allow to delete device mapper disk partition
Eric Blake
- [libvirt] [PATCH] build: fix parted detection at configure time
Eric Blake
- [libvirt] [PATCH 1/2] Get cpuMhz of virNodeGetInfo() from cpufreq/cpuinfo_max_freq, if exist
Eric Blake
- [libvirt] [PATCHv3 1/5] smartcard: add XML support for <smartcard> device
Eric Blake
- [libvirt] [PATCHv3 1/5] smartcard: add XML support for <smartcard> device
Eric Blake
- [libvirt] libvirt 0.8.7 LOCALSTATEDIR ubuntu patch
Philipp Schmid
Last message date:
Mon Jan 31 23:57:35 UTC 2011
Archived on: Sun Mar 6 13:39:21 UTC 2022
This archive was generated by
Pipermail 0.09 (Mailman edition).