[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] [PATCH 7/7] support multifunction PCI device



On Fri, May 27, 2011 at 06:23:16PM +0800, Wen Congyang wrote:
> If qemu supports multi function PCI device, the format of the PCI address passed
> to qemu is "bus=pci.0,multifunction=on,addr=slot.function".
> 
> If qemu does not support multi function PCI device, the format of the PCI address
> passed to qemu is "bus=pci.0,addr=slot".
> ---
>  src/conf/domain_conf.c  |    3 +++
>  src/qemu/qemu_command.c |   27 +++++++++++++++++++++------
>  2 files changed, 24 insertions(+), 6 deletions(-)
> 
> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
> index 8ff155b..6d70efd 100644
> --- a/src/conf/domain_conf.c
> +++ b/src/conf/domain_conf.c
> @@ -1296,6 +1296,9 @@ int virDomainDeviceAddressIsValid(virDomainDeviceInfoPtr info,
>  
>  int virDomainDevicePCIAddressIsValid(virDomainDevicePCIAddressPtr addr)
>  {
> +    /* PCI bus has 32 slots and 8 functions per slot */
> +    if (addr->slot >= 32 || addr->function >= 8)
> +        return 0;
>      return addr->domain || addr->bus || addr->slot;
>  }
>  
> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
> index da18719..21c7cdb 100644
> --- a/src/qemu/qemu_command.c
> +++ b/src/qemu/qemu_command.c
> @@ -1251,10 +1251,20 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
>                              _("Only PCI device addresses with bus=0 are supported"));
>              return -1;
>          }
> -        if (info->addr.pci.function != 0) {
> -            qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> -                            _("Only PCI device addresses with function=0 are supported"));
> -            return -1;
> +        if (qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_MULTIFUNCTION)) {
> +            if (info->addr.pci.function > 7) {
> +                qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> +                                _("The function of PCI device addresses must "
> +                                  "less than 8"));
> +                return -1;
> +            }
> +        } else {
> +            if (info->addr.pci.function != 0) {
> +                qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> +                                _("Only PCI device addresses with function=0 "
> +                                  "are supported"));
> +                return -1;
> +            }
>          }
>  
>          /* XXX
> @@ -1264,9 +1274,14 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
>           * to pciNN.0  where NN is the domain number
>           */
>          if (qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_MULTIBUS))
> -            virBufferAsprintf(buf, ",bus=pci.0,addr=0x%x", info->addr.pci.slot);
> +            virBufferAsprintf(buf, ",bus=pci.0");
> +        else
> +            virBufferAsprintf(buf, ",bus=pci");
> +        if (qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_MULTIFUNCTION))
> +            virBufferAsprintf(buf, ",multifunction=on,addr=0x%x.0x%x",
> +                              info->addr.pci.slot, info->addr.pci.function);
>          else
> -            virBufferAsprintf(buf, ",bus=pci,addr=0x%x", info->addr.pci.slot);
> +            virBufferAsprintf(buf, ",addr=0x%x", info->addr.pci.slot);
>      }
>      return 0;
>  }

ACK


Daniel
-- 
|: http://berrange.com      -o-    http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org              -o-             http://virt-manager.org :|
|: http://autobuild.org       -o-         http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org       -o-       http://live.gnome.org/gtk-vnc :|


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]