[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] libvirt-0.9.3 week freeze, RC1 version to test



于 2011-6-28 16:20, Matthias Bolte 写道:
2011/6/28 simon jin <simonjin linux vnet ibm com>:
于 2011-6-27 23:17, Laine Stump 写道:

On 06/27/2011 07:32 AM, Matthias Bolte wrote:

2011/6/27 simon<simonjin linux vnet ibm com>:

于 2011-6-27 13:01, Daniel Veillard 写道:

   So we are entering the week freeze for the new version 0.9.3
I have made an rc1 tarball available at:
    ftp://libvirt.org/libvirt/libvirt-0.9.3-rc1.tar.gz
along with rpms for those interested
We pushed a lot of patches in the last few days, we know there is at
least some cleanup issues, but I tried it locally and basic operations
seems to work fine,

   please give it a try too and report issues,

    thanks !

Daniel

On fc14.x86_64
TEST: networkxml2argvtest  FAIL

Download  libvirt-0.9.3-rc1.tar.gz

./configure&&  make&&  make check

It report 1 of 52 tests failed

TEST: networkxml2argvtest
       !.!!!!!                                  7   FAIL
FAIL: networkxml2argvtest

This a known problem when you configure libvirt with localstatedir
other than /var, what happens when you just run configure without
arguments.

It looks like that's what he did, so maybe this is a different problem (or
possibly his configure defaults to /usr/local/var?).

If the default localstatedir isn't /var, try doing "./autogen.sh --system"
instead of ./configure. If that doesn't cure the problem, try running the
test with debug logging turned on to see exactly what error is reported:

  LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2 ./networkxml2argvtest

I didn't use any arguments in configure, but the defaults localstatdir is
/usr/local/var.
I found below lines in config.status:
S["prefix"]="/usr/local"
S["localstatedir"]="${prefix}/var"

./autogen.sh --system will fix this issue.

[libvirt-0.9.3]$  LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2
tests/networkxml2argvtest
TEST: tests/networkxml2argvtest
 1) Network XML-2-Argv isolated-network                               ...
/home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/isolated-network.xml:
failed to open: No such file or directory
FAILED
 2) Network XML-2-Argv routed-network                                 ...
/home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/routed-network.xml:
failed to open: No such file or directory
FAILED
 3) Network XML-2-Argv nat-network                                    ...
/home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/nat-network.xml:
failed to open: No such file or directory
FAILED
 4) Network XML-2-Argv netboot-network                                ...
/home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/netboot-network.xml:
failed to open: No such file or directory
FAILED
 5) Network XML-2-Argv netboot-proxy-network                          ...
/home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/netboot-proxy-network.xml:
failed to open: No such file or directory
FAILED
 6) Network XML-2-Argv nat-network-dns-txt-record                     ...
/home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/nat-network-dns-txt-record.xml:
failed to open: No such file or directory
FAILED
 7) Network XML-2-Argv nat-network-dns-hosts                          ...
/home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/nat-network-dns-hosts.xml:
failed to open: No such file or directory
FAILED

Those .xml files actully under test/.

-Simon Jin
That's expected because you need to be in the tests directory to run a
test manually or set the srcdir envvar to point to the test directory

You ran

LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2 tests/networkxml2argvtest

but Laine suggested

LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2 ./networkxml2argvtest

and missed to explicitly state that you need to cd to the tests directory first.

cd test and run:
[tests]$ sudo LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2 ./networkxml2argvtest
[sudo] password for simon: 
TEST: networkxml2argvtest
 1) Network XML-2-Argv isolated-network                               ... 
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --dhcp-option=3 --listen-address 192.168.152.1 --dhcp-range 192.168.152.2,192.168.152.254
--dhcp-leasefile=/var/lib/libvirt/dnsmasq/private.leases
--dhcp-lease-max=253 --dhcp-no-override]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --dhcp-option=3 --listen-address 192.168.152.1 --dhcp-range 192.168.152.2,192.168.152.254
--dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/private.leases
--dhcp-lease-max=253 --dhcp-no-override]
                                                                      ... FAILED

Yes, the root cause is --localstatdir isn't set to /var. i see you have fixed it in trunk. Thanks
-Simon Jin


 2) Network XML-2-Argv routed-network                                 ... OK
 3) Network XML-2-Argv nat-network                                    ... 16:31:38.713: 5636: info : libvirt version: 0.9.3
16:31:38.713: 5636: error : hostsfileSave:446 : cannot write config file '/usr/local/var/lib/libvirt/dnsmasq/default.hostsfile': Unknown error 18446744073709551614

Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override]
                                                                      ... libvir: Network Config error : cannot write config file '/usr/local/var/lib/libvirt/dnsmasq/default.hostsfile': Unknown error 18446744073709551614
FAILED
 4) Network XML-2-Argv netboot-network                                ... 
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --domain example.com --conf-file= --except-interface lo --listen-address 192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/netboot.leases --dhcp-lease-max=253 --dhcp-no-override --enable-tftp --tftp-root /var/lib/tftproot --dhcp-boot pxeboot.img]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --domain example.com --conf-file= --except-interface lo --listen-address 192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/netboot.leases --dhcp-lease-max=253 --dhcp-no-override --enable-tftp --tftp-root /var/lib/tftproot --dhcp-boot pxeboot.img]
                                                                      ... FAILED
 5) Network XML-2-Argv netboot-proxy-network                          ... 
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --domain example.com --conf-file= --except-interface lo --listen-address 192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/netboot.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-boot pxeboot.img,,10.20.30.40]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --domain example.com --conf-file= --except-interface lo --listen-address 192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/netboot.leases --dhcp-lease-max=253 --dhcp-no-override --dhcp-boot pxeboot.img,,10.20.30.40]
                                                                      ... FAILED
 6) Network XML-2-Argv nat-network-dns-txt-record                     ... 
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --txt-record=example,example value --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --txt-record=example,example value --listen-address 192.168.122.1 --listen-address 192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address 2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override]
                                                                      ... FAILED
 7) Network XML-2-Argv nat-network-dns-hosts                          ... 
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --listen-address 192.168.122.1 --addn-hosts=/var/lib/libvirt/dnsmasq/default.addnhosts]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file= --except-interface lo --listen-address 192.168.122.1 --addn-hosts=/usr/local/var/lib/libvirt/dnsmasq/default.addnhosts]
                                                                      ... FAILED


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]