[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] problem attaching/detaching disk



On Sun, Mar 06, 2011 at 10:36:14PM -0700, Shi Jin wrote:
> I am very glad to hear that you can reproduce this problem.
> Please keep me posted on the status of this patch.
> One more question which might be more appropriate for Redhat: any idea when
> this fix would go into RHEL-6 as a bug fix?
> Should I open a bug ticket at RHEL support?

Yes, if you have questions about Red Hat products, you should direct
them to Red Hat support.

Dave


> Thank you very much.
> Shi
> 
> On Sun, Mar 6, 2011 at 10:28 PM, Wen Congyang <wency cn fujitsu com> wrote:
> 
> > At 03/05/2011 05:35 AM, Shi Jin Write:
> > > Although the attach/detach problem has been solved, I fond the driver
> > name
> > > issue still causes problems restoring from a saved VM with disk attached.
> >
> > I can reproduce this a bug of libvirt: we can not restore the VM from the
> > file
> > we saved.
> >
> > Thank you for reporting this problem.
> > I will make a patch to fix it.
> >
> > Thanks.
> > Wen Congyang
> >
> > >
> > > For example, once saved, the checkpoint file would contains
> > >  <disk type='file' device='disk'>
> > >       <driver name='file' type='qcow2'/>
> > >       <source
> > >
> > file='/vrstorm/cloud/PrivateAccounts/74d37709b07be4bbae228dfc273e4339/volumes/vol-126'/>
> > >       <target dev='vdf' bus='virtio'/>
> > >       <alias name='virtio-disk5'/>
> > >       <address type='pci' domain='0x0000' bus='0x00' slot='0x06'
> > > function='0x0'/>
> > >     </disk>
> > >
> > > And then the restore would fail:
> > >
> > > [cloudadmin test2 images]$ virsh restore checkpoint
> > > error: Failed to restore domain from checkpoint
> > > error: internal error unsupported driver name 'file' for disk
> > >
> > '/vrstorm/cloud/PrivateAccounts/74d37709b07be4bbae228dfc273e4339/volumes/vol-126'
> > >
> > >
> > > If I simply edit the checkpoint file to change file to qemu:<driver
> > > name='qemu' type='qcow2'/>
> > >
> > > Then it works.
> > >
> > > [cloudadmin test2 images]$ virsh restore checkpoint
> > > Domain restored from checkpoint
> > >
> > >
> > > So there is indeed a problem with the driver name. Maybe I should
> > > start a new thread on it?
> > >
> > >
> > > Shi
> > >
> > >
> > > On Fri, Mar 4, 2011 at 11:44 AM, Shi Jin <jinzishuai gmail com> wrote:
> > >
> > >> Finally, everything works for if I simply change my template to use the
> > >> /usr/libexec/qemu-kvm instead of /usr/bin/kvm, which is a symbolic link
> > to
> > >> it.
> > >> Not sure why it matters but that does solve all the mysteries.
> > >>
> > >> Shi
> > >>
> > >> On Fri, Mar 4, 2011 at 9:56 AM, Shi Jin <jinzishuai gmail com> wrote:
> > >>
> > >>> It seems that your qemu does not support monitor command 'drive_add'.
> > >>>> What's version of your qemu?
> > >>>>
> > >>>> Thank you. Here is my version
> > >>> [cloudadmin test2 ~]$ /usr/libexec/qemu-kvm -version
> > >>> QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2), Copyright (c)
> > >>> 2003-2008 Fabrice Bellard
> > >>>
> > >>> I finally think it is a permission issue. If I run commands as root and
> > >>> get kvm run by the default qemu user, both attach-disk and detach-disk
> > works
> > >>> like your case.
> > >>>
> > >>> However, if I set to run as another user, such as cloudamin,
> > attach-disk
> > >>> works but detach-disk does not.
> > >>> My libvirtd.conf has
> > >>> unix_sock_group = "cloudadmin"
> > >>> unix_sock_rw_perms = "0770"
> > >>> auth_unix_ro = "none"
> > >>> auth_unix_rw = "none"
> > >>> log_level = 3
> > >>> log_outputs="3:file:/var/log/libvirt/libvirtd.log"
> > >>>
> > >>> and qemu.conf has
> > >>> user = "cloudadmin"
> > >>> group = "cloudadmin"
> > >>> dynamic_ownership = 0
> > >>>
> > >>> All images are owned by the cloudadmin:cloudadmin.
> > >>>
> > >>> Is there a problem with this setup?
> > >>>
> > >>> Thank you very much.
> > >>> Shi
> > >>>
> > >>>>  > 15:31:52.902: debug : virEventRunOnce:595 : Poll got 1 event
> > >>>>
> > >>>>> 15:31:52.902: debug : virEventDispatchTimeouts:405 : Dispatch 3
> > >>>>> 15:31:52.902: debug : qemuMonitorAddDevice:1878 : mon=0x7f3628341370
> > >>>>>
> > >>>>
> > device=virtio-blk-pci,bus=pci.0,addr=0x6,drive=drive-virtio-disk1,id=virtio-disk1
> > >>>>
> > >>>> When 'drive_add' failes, we do not call qemuMonitorAddDevice(). But it
> > is
> > >>>> called.
> > >>>>
> > >>>>> 15:31:52.902: debug : virEventDispatchHandles:450 : Dispatch 8
> > >>>>> 15:31:52.902: debug : qemuMonitorCommandWithHandler:230 : Send
> > command
> > >>>>> 'device_add
> > >>>>>
> > >>>>
> > virtio-blk-pci,bus=pci.0,addr=0x6,drive=drive-virtio-disk1,id=virtio-disk1'
> > >>>>> for write with FD -1
> > >>>>
> > >>>> What's the reply of command 'device_add'? Can you provide it. I think
> > it
> > >>>> should fail.
> > >>>>
> > >>>> Thanks.
> > >>>> Wen Congyang
> > >>>>
> > >>>>>
> > >>>>> Than you very much.
> > >>>>>
> > >>>>> Shi
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>> On Thu, Mar 3, 2011 at 10:12 PM, Wen Congyang <wency cn fujitsu com>
> > >>>> wrote:
> > >>>>>
> > >>>>>> At 03/04/2011 01:00 PM, Shi Jin Write:
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>     <disk type='file' device='disk'>
> > >>>>>>>>       <driver name='qemu' type='qcow2' cache='none'/>
> > >>>>>>>>      <source file='/var/lib/libvirt/images/rhel6rc_64.img'/>
> > >>>>>>>>      <target dev='hda' bus='ide'/>
> > >>>>>>>>      <alias name='ide0-0-0'/>
> > >>>>>>>>      <address type='drive' controller='0' bus='0' unit='0'/>
> > >>>>>>>>    </disk>
> > >>>>>>>>    <disk type='file' device='cdrom'>
> > >>>>>>>>      <driver name='qemu' type='raw'/>
> > >>>>>>>>      <source file='/var/lib/libvirt/images/test.iso'/>
> > >>>>>>>>      <target dev='hdc' bus='ide'/>
> > >>>>>>>>      <readonly/>
> > >>>>>>>>      <alias name='ide0-1-0'/>
> > >>>>>>>>      <address type='drive' controller='0' bus='1' unit='0'/>
> > >>>>>>>>    </disk>
> > >>>>>>>>     <disk type='file' device='disk'>
> > >>>>>>>>      <driver name='file' type='qcow2'/>
> > >>>>>>>>       <source file='/var/lib/libvirt/images/test3.img'/>
> > >>>>>>>>       <target dev='vdb' bus='virtio'/>
> > >>>>>>>>       <alias name='virtio-disk1'/>
> > >>>>>>>>      <address type='pci' domain='0x0000' bus='0x00' slot='0x06'
> > >>>>>>>> function='0x0'/>
> > >>>>>>>>    </disk>
> > >>>>>>>>    <controller type='ide' index='0'>
> > >>>>>>>>      <alias name='ide0'/>
> > >>>>>>>>      <address type='pci' domain='0x0000' bus='0x00' slot='0x01'
> > >>>>>>>> function='0x1'/>
> > >>>>>>>>    </controller>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>> Thank you very much. It is exactly the same output as mine,
> > >>>> particularly
> > >>>>>>>  <driver name='file' type='qcow2'/>
> > >>>>>>> I thought it has to be name='qemu' to detach properly but since you
> > >>>>>> didn't
> > >>>>>>> have a problem, I am very lost on why mine didn't work.
> > >>>>>>>
> > >>>>>>> My libvirtd.log shows (with debugging turned on)
> > >>>>>>> 14:43:18.965: debug : qemuMonitorCommandWithHandler:235 : Receive
> > >>>> command
> > >>>>>>> reply ret=0 errno=0 33 bytes 'Device 'virtio-disk1' not found^M
> > >>>>>>> '
> > >>>>>>> 14:43:18.965: debug : virEventDispatchTimeouts:405 : Dispatch 3
> > >>>>>>> 14:43:18.965: debug : virEventDispatchHandles:450 : Dispatch 8
> > >>>>>>> 14:43:18.965: error : qemuMonitorTextDelDevice:2314 : operation
> > >>>> failed:
> > >>>>>>> detaching virtio-disk1 device failed: Device 'virtio-disk1' not
> > >>>> found^M
> > >>>>>>>
> > >>>>>>> Do you know what the "device not found" error means?
> > >>>>>>
> > >>>>>> It seems attaching virtio-disk1 failed.
> > >>>>>> Can you provide the log when you attach virtio-disk1?
> > >>>>>>
> > >>>>>> Thanks.
> > >>>>>> Wen Congyang
> > >>>>>>
> > >>>>>>>
> > >>>>>>> Thanks.
> > >>>>>>>
> > >>>>>>> Shi
> > >>>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>
> > >>>>>
> > >>>>
> > >>>>
> > >>>
> > >>>
> > >>> --
> > >>> Shi Jin, Ph.D.
> > >>>
> > >>>
> > >>
> > >>
> > >> --
> > >> Shi Jin, Ph.D.
> > >>
> > >>
> > >
> > >
> >
> >
> 
> 
> -- 
> Shi Jin, Ph.D.

> --
> libvir-list mailing list
> libvir-list redhat com
> https://www.redhat.com/mailman/listinfo/libvir-list


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]