[libvirt] [PATCHv2 2/2] qemu: make PCI multifunction support more manual
Laine Stump
laine at laine.org
Fri Sep 30 18:02:07 UTC 2011
(V2: address Daniel Veillard's two review points (don't allow
"multifunction='default'", and add "multifunction=off" to the qemu
commandline when that's what the XML says), and modify the checks for
duplicate PCI address usage attempts to account for multifunction=off
on a device's function 0, per IRC discussion with Dan Berrange (see
new qemuCollectPCIAddress()). As a side effect, attempts to re-use the
same PCI address are now logged rather than silently generating an
error.)
When support for was added for PCI multifunction cards (in commit
9f8baf, first included in libvirt 0.9.3), it was done by always
turning on the multifunction bit for all PCI devices. Since that time
it has been realized that this is not an ideal solution, and that the
multifunction bit must be selectively turned on. For example, see
https://bugzilla.redhat.com/show_bug.cgi?id=728174
and the discussion before and after
https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html
This patch modifies multifunction support so that the multifunction=on
option is only added to the qemu commandline for a device if its PCI
<address> definition has the attribute "multifunction='on'", e.g.:
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04' function='0x0' multifunction='on'/>
In practice, the multifunction bit should only be turned on if
function='0' AND other functions will be used in the same slot - it
usually isn't needed for functions 1-7 (although there are apparently
some exceptions, e.g. the Intel X53 according to the QEMU source
code), and should never be set if only function 0 will be used in the
slot. The test cases have been changed accordingly to illustrate.
With this patch in place, if a user attempts to assign multiple
functions in a slot without setting the multifunction bit for function
0, libvirt will issue an error when the domain is defined, and the
define operation will fail. In the future, we may decide to detect
this situation and automatically add multifunction=on to avoid the
error; even then it will still be useful to have a manual method of
turning on multifunction since, as stated above, there are some
devices that excpect it to be turned on for all functions in a slot.
A side effect of this patch is that attempts to use the same PCI
address for two different devices will now log an error (previously
this would cause the domain define operation to fail, but there would
be no log message generated). Because the function doing this log was
almost completely rewritten, I didn't think it worthwhile to make a
separate patch for that fix (the entire patch would immediately be
obsoleted).
---
docs/formatdomain.html.in | 29 +++++--
docs/schemas/domaincommon.rng | 8 ++
src/conf/domain_conf.c | 22 +++++-
src/conf/domain_conf.h | 10 +++
src/libvirt_private.syms | 2 +
src/qemu/qemu_command.c | 81 ++++++++++++++++----
.../qemuxml2argv-multifunction-pci-device.args | 18 ++--
.../qemuxml2argv-multifunction-pci-device.xml | 6 +-
.../qemuxml2argv-usb-ich9-companion.args | 10 +-
.../qemuxml2argv-usb-ich9-companion.xml | 2 +-
.../qemuxml2argv-usb-ich9-ehci-addr.args | 2 +-
.../qemuxml2argv-usb-piix3-controller.args | 2 +-
tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args | 10 +-
tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml | 2 +-
tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args | 20 +++---
tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml | 4 +-
16 files changed, 165 insertions(+), 63 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 49a2c09..6308ebc 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -1118,10 +1118,14 @@
The <code>type</code> attribute is mandatory, and is typically
"pci" or "drive". For a "pci" controller, additional
attributes for <code>bus</code>, <code>slot</code>,
- and <code>function</code> must be present, as well as an
- optional <code>domain</code>. For a "drive" controller,
- additional attributes <code>controller</code>, <code>bus</code>,
+ and <code>function</code> must be present, as well as
+ optional <code>domain</code>
+ and <code>multifunction</code><span class="since">since
+ 0.9.7, requires QEMU 0.13</span> (defaults to 'off'). For a
+ "drive" controller, additional attributes
+ <code>controller</code>, <code>bus</code>,
and <code>unit</code> are available, each defaulting to 0.
+
</dd>
</dl>
@@ -1298,7 +1302,7 @@
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<master startport='0'/>
- <address type='pci' domain='0' bus='0' slot='4' function='0'/>
+ <address type='pci' domain='0' bus='0' slot='4' function='0' multifunction='on'/>
</controller>
...
</devices>
@@ -1431,10 +1435,16 @@
with <code>virsh nodedev-list</code>. The
<code>bus</code> attribute allows the hexadecimal values 0 to ff, the
<code>slot</code> attribute allows the hexadecimal values 0 to 1f, and
- the <code>function</code> attribute allows the hexadecimal values 0 to
- 7. There is also an optional <code>domain</code> attribute for the
- PCI domain, with hexadecimal values 0 to ffff, but it is currently
- not used by qemu.</dd>
+ the <code>function</code> attribute allows the hexadecimal values 0 to 7.
+ The <code>multifunction</code> attribute controls turning on the
+ multifunction bit for a particular slot/function in the PCI
+ control register<span class="since">since 0.9.7, requires QEMU
+ 0.13</span>. <code>multifunction</code> defaults to 'off', but
+ should be set to 'on' for function 0 of a slot that will have
+ multiple functions used.
+ There is also an optional <code>domain</code> attribute for
+ the PCI domain, with hexadecimal values 0 to ffff, but it is
+ currently not used by qemu.</dd>
</dl>
<h4><a name="elementsRedir">Redirected devices</a></h4>
@@ -1602,7 +1612,8 @@
the interface to a particular pci slot, with
attribute <code>type='pci'</code> and additional
attributes <code>domain</code>, <code>bus</code>, <code>slot</code>,
- and <code>function</code> as appropriate.
+ <code>function</code>, and <code>multifunction</code>
+ <span class="since">since 0.9.7, requires QEMU 0.13</span> as appropriate.
</p>
<h5><a name="elementsNICSVirtual">Virtual network</a></h5>
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index 4972fac..cffaac2 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -2118,6 +2118,14 @@
<attribute name="function">
<ref name="pciFunc"/>
</attribute>
+ <optional>
+ <attribute name="multifunction">
+ <choice>
+ <value>on</value>
+ <value>off</value>
+ </choice>
+ </attribute>
+ </optional>
</define>
<define name="driveaddress">
<optional>
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index c141982..6fb1888 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -138,6 +138,12 @@ VIR_ENUM_IMPL(virDomainDeviceAddress, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_LAST,
"ccid",
"usb")
+VIR_ENUM_IMPL(virDomainDeviceAddressPciMulti,
+ VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_LAST,
+ "default",
+ "on",
+ "off")
+
VIR_ENUM_IMPL(virDomainDisk, VIR_DOMAIN_DISK_TYPE_LAST,
"block",
"file",
@@ -1652,6 +1658,10 @@ virDomainDeviceInfoFormat(virBufferPtr buf,
info->addr.pci.bus,
info->addr.pci.slot,
info->addr.pci.function);
+ if (info->addr.pci.multi) {
+ virBufferAsprintf(buf, " multifunction='%s'",
+ virDomainDeviceAddressPciMultiTypeToString(info->addr.pci.multi));
+ }
break;
case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE:
@@ -1696,7 +1706,7 @@ static int
virDomainDevicePCIAddressParseXML(xmlNodePtr node,
virDomainDevicePCIAddressPtr addr)
{
- char *domain, *slot, *bus, *function;
+ char *domain, *slot, *bus, *function, *multi;
int ret = -1;
memset(addr, 0, sizeof(*addr));
@@ -1705,6 +1715,7 @@ virDomainDevicePCIAddressParseXML(xmlNodePtr node,
bus = virXMLPropString(node, "bus");
slot = virXMLPropString(node, "slot");
function = virXMLPropString(node, "function");
+ multi = virXMLPropString(node, "multifunction");
if (domain &&
virStrToLong_ui(domain, NULL, 0, &addr->domain) < 0) {
@@ -1734,6 +1745,14 @@ virDomainDevicePCIAddressParseXML(xmlNodePtr node,
goto cleanup;
}
+ if (multi &&
+ ((addr->multi = virDomainDeviceAddressPciMultiTypeFromString(multi)) <= 0)) {
+ virDomainReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("Unknown value '%s' for <address> 'multifunction' attribute"),
+ multi);
+ goto cleanup;
+
+ }
if (!virDomainDevicePCIAddressIsValid(addr)) {
virDomainReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("Insufficient specification for PCI address"));
@@ -1747,6 +1766,7 @@ cleanup:
VIR_FREE(bus);
VIR_FREE(slot);
VIR_FREE(function);
+ VIR_FREE(multi);
return ret;
}
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index 4a99ea4..bc41d34 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -74,6 +74,14 @@ enum virDomainDeviceAddressType {
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_LAST
};
+enum virDomainDeviceAddressPciMulti {
+ VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_DEFAULT = 0,
+ VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_ON,
+ VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_OFF,
+
+ VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_LAST
+};
+
typedef struct _virDomainDevicePCIAddress virDomainDevicePCIAddress;
typedef virDomainDevicePCIAddress *virDomainDevicePCIAddressPtr;
struct _virDomainDevicePCIAddress {
@@ -81,6 +89,7 @@ struct _virDomainDevicePCIAddress {
unsigned int bus;
unsigned int slot;
unsigned int function;
+ int multi; /* enum virDomainDeviceAddressPciMulti */
};
typedef struct _virDomainDeviceDriveAddress virDomainDeviceDriveAddress;
@@ -1830,6 +1839,7 @@ VIR_ENUM_DECL(virDomainLifecycle)
VIR_ENUM_DECL(virDomainLifecycleCrash)
VIR_ENUM_DECL(virDomainDevice)
VIR_ENUM_DECL(virDomainDeviceAddress)
+VIR_ENUM_DECL(virDomainDeviceAddressPciMulti)
VIR_ENUM_DECL(virDomainDisk)
VIR_ENUM_DECL(virDomainDiskDevice)
VIR_ENUM_DECL(virDomainDiskBus)
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index c2a3fab..1ac486f 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -269,6 +269,8 @@ virDomainDefParseNode;
virDomainDefParseString;
virDomainDeleteConfig;
virDomainDeviceAddressIsValid;
+virDomainDeviceAddressPciMultiTypeFromString;
+virDomainDeviceAddressPciMultiTypeToString;
virDomainDeviceAddressTypeToString;
virDomainDeviceDefFree;
virDomainDeviceDefParse;
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index a13ba71..ff83e2d 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -774,22 +774,65 @@ static int qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
virDomainDeviceInfoPtr dev,
void *opaque)
{
+ int ret = -1;
+ char *addr = NULL;
qemuDomainPCIAddressSetPtr addrs = opaque;
- if (dev->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
- char *addr = qemuPCIAddressAsString(dev);
- if (!addr)
- return -1;
+ if (dev->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI)
+ return 0;
- VIR_DEBUG("Remembering PCI addr %s", addr);
+ addr = qemuPCIAddressAsString(dev);
+ if (!addr)
+ goto cleanup;
- if (virHashAddEntry(addrs->used, addr, addr) < 0) {
- VIR_FREE(addr);
- return -1;
+ if (virHashLookup(addrs->used, addr)) {
+ if (dev->addr.pci.function != 0) {
+ qemuReportError(VIR_ERR_XML_ERROR,
+ _("Attempted double use of PCI Address '%s' "
+ "(may need \"multifunction='on'\" for device on function 0"),
+ addr);
+ } else {
+ qemuReportError(VIR_ERR_XML_ERROR,
+ _("Attempted double use of PCI Address '%s'"), addr);
}
+ goto cleanup;
}
- return 0;
+ VIR_DEBUG("Remembering PCI addr %s", addr);
+ if (virHashAddEntry(addrs->used, addr, addr) < 0)
+ goto cleanup;
+ addr = NULL;
+
+ if ((dev->addr.pci.function == 0) &&
+ (dev->addr.pci.multi != VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_ON)) {
+ /* a function 0 w/o multifunction=on must reserve the entire slot */
+ int function;
+ virDomainDeviceInfo temp_dev = *dev;
+
+ for (function = 1; function < QEMU_PCI_ADDRESS_LAST_FUNCTION; function++) {
+ temp_dev.addr.pci.function = function;
+ addr = qemuPCIAddressAsString(&temp_dev);
+ if (!addr)
+ goto cleanup;
+
+ if (virHashLookup(addrs->used, addr)) {
+ qemuReportError(VIR_ERR_XML_ERROR,
+ _("Attempted double use of PCI Address '%s'"
+ "(need \"multifunction='off'\" for device on function 0)"),
+ addr);
+ goto cleanup;
+ }
+
+ VIR_DEBUG("Remembering PCI addr %s (multifunction=off for function 0)", addr);
+ if (virHashAddEntry(addrs->used, addr, addr))
+ goto cleanup;
+ addr = NULL;
+ }
+ }
+ ret = 0;
+cleanup:
+ VIR_FREE(addr);
+ return ret;
}
@@ -1376,7 +1419,13 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
if (info->addr.pci.function != 0) {
qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("Only PCI device addresses with function=0 "
- "are supported"));
+ "are supported with this QEMU binary"));
+ return -1;
+ }
+ if (info->addr.pci.multi == VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_ON) {
+ qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("'multifunction=on' is not supported with "
+ "this QEMU binary"));
return -1;
}
}
@@ -1391,11 +1440,13 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
virBufferAsprintf(buf, ",bus=pci.0");
else
virBufferAsprintf(buf, ",bus=pci");
- if (qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_MULTIFUNCTION))
- virBufferAsprintf(buf, ",multifunction=on,addr=0x%x.0x%x",
- info->addr.pci.slot, info->addr.pci.function);
- else
- virBufferAsprintf(buf, ",addr=0x%x", info->addr.pci.slot);
+ if (info->addr.pci.multi == VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_ON)
+ virBufferAddLit(buf, ",multifunction=on");
+ else if (info->addr.pci.multi == VIR_DOMAIN_DEVICE_ADDRESS_PCI_MULTI_OFF)
+ virBufferAddLit(buf, ",multifunction=off");
+ virBufferAsprintf(buf, ",addr=0x%x", info->addr.pci.slot);
+ if (info->addr.pci.function != 0)
+ virBufferAsprintf(buf, ".0x%x", info->addr.pci.function);
} else if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_USB) {
virBufferAsprintf(buf, ",bus=");
qemuUsbId(buf, info->addr.usb.bus);
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.args b/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.args
index ff229f2..8a2150e 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.args
@@ -1,15 +1,15 @@
LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M \
pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults \
-monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \
--device lsi,id=scsi0,bus=pci.0,multifunction=on,addr=0x3.0x0 \
--device lsi,id=scsi1,bus=pci.0,multifunction=on,addr=0x4.0x0 \
+-device lsi,id=scsi0,bus=pci.0,multifunction=off,addr=0x3 \
+-device lsi,id=scsi1,bus=pci.0,multifunction=on,addr=0x4 \
-device lsi,id=scsi2,bus=pci.0,multifunction=on,addr=0x4.0x1 \
--device lsi,id=scsi3,bus=pci.0,multifunction=on,addr=0x4.0x2 \
--device lsi,id=scsi4,bus=pci.0,multifunction=on,addr=0x4.0x3 \
--device lsi,id=scsi5,bus=pci.0,multifunction=on,addr=0x4.0x4 \
--device lsi,id=scsi6,bus=pci.0,multifunction=on,addr=0x4.0x5 \
--device lsi,id=scsi7,bus=pci.0,multifunction=on,addr=0x4.0x6 \
--device lsi,id=scsi8,bus=pci.0,multifunction=on,addr=0x4.0x7 \
+-device lsi,id=scsi3,bus=pci.0,addr=0x4.0x2 \
+-device lsi,id=scsi4,bus=pci.0,addr=0x4.0x3 \
+-device lsi,id=scsi5,bus=pci.0,addr=0x4.0x4 \
+-device lsi,id=scsi6,bus=pci.0,addr=0x4.0x5 \
+-device lsi,id=scsi7,bus=pci.0,addr=0x4.0x6 \
+-device lsi,id=scsi8,bus=pci.0,addr=0x4.0x7 \
-drive file=/tmp/scsidisk.img,if=none,id=drive-scsi0-0-0 \
-device scsi-disk,bus=scsi0.0,scsi-id=0,drive=drive-scsi0-0-0,id=scsi0-0-0 \
--usb -device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x5.0x0
+-usb -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.xml b/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.xml
index 672fb61..24b95b8 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.xml
+++ b/tests/qemuxml2argvdata/qemuxml2argv-multifunction-pci-device.xml
@@ -20,13 +20,13 @@
<address type='drive' controller='0' bus='0' unit='0'/>
</disk>
<controller type='scsi' index='0'>
- <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0' multifunction='off'/>
</controller>
<controller type='scsi' index='1'>
- <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0' multifunction='on'/>
</controller>
<controller type='scsi' index='2'>
- <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x1'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x1' multifunction='on'/>
</controller>
<controller type='scsi' index='3'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x2'/>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.args b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.args
index 1007544..fea6c35 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.args
@@ -1,6 +1,6 @@
LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c \
--device ich9-usb-ehci1,id=usb,bus=pci.0,multifunction=on,addr=0x4.0x7 \
--device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4.0x0 \
--device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,multifunction=on,addr=0x4.0x1 \
--device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,multifunction=on,addr=0x4.0x2 \
--device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0
+-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \
+-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4 \
+-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x4.0x1 \
+-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x4.0x2 \
+-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.xml b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.xml
index 05a6adf..5a43638 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.xml
+++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-companion.xml
@@ -15,7 +15,7 @@
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<master startport='0'/>
- <address type='pci' domain='0' bus='0' slot='4' function='0'/>
+ <address type='pci' domain='0' bus='0' slot='4' function='0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<master startport='2'/>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args
index 0059ab5..94a4602 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args
@@ -1 +1 @@
-LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c -device ich9-usb-ehci1,id=usb,bus=pci.0,multifunction=on,addr=0x4.0x7 -device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0
+LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-piix3-controller.args b/tests/qemuxml2argvdata/qemuxml2argv-usb-piix3-controller.args
index 06863bb..546d119 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-usb-piix3-controller.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-piix3-controller.args
@@ -1 +1 @@
-LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c -device piix3-usb-uhci,id=usb,bus=pci.0,multifunction=on,addr=0x1.0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0
+LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args b/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args
index f6270d5..7d34c2a 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.args
@@ -1,10 +1,10 @@
LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c \
--device ich9-usb-ehci1,id=usb,bus=pci.0,multifunction=on,addr=0x4.0x7 \
--device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4.0x0 \
--device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,multifunction=on,addr=0x4.0x1 \
--device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,multifunction=on,addr=0x4.0x2 \
+-device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 \
+-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4 \
+-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x4.0x1 \
+-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x4.0x2 \
-chardev socket,id=charredir0,host=localhost,port=4000 \
-device usb-redir,chardev=charredir0,id=redir0 \
-chardev spicevmc,id=charredir1,name=usbredir \
-device usb-redir,chardev=charredir1,id=redir1,bus=usb.0,port=4 \
--device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0
+-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml b/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml
index 1dac3fb..a359a3d 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml
+++ b/tests/qemuxml2argvdata/qemuxml2argv-usb-redir.xml
@@ -19,7 +19,7 @@
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<master startport='0'/>
- <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<master startport='2'/>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args b/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args
index be4a78e..580cace 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.args
@@ -1,15 +1,15 @@
LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -no-acpi -boot c \
--device piix3-usb-uhci,id=usb,bus=pci.0,multifunction=on,addr=0x1.0x2 \
--device ich9-usb-ehci1,id=usb1,bus=pci.0,multifunction=on,addr=0x4.0x7 \
--device ich9-usb-uhci1,masterbus=usb1.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4.0x0 \
--device ich9-usb-uhci2,masterbus=usb1.0,firstport=2,bus=pci.0,multifunction=on,addr=0x4.0x1 \
--device ich9-usb-uhci3,masterbus=usb1.0,firstport=4,bus=pci.0,multifunction=on,addr=0x4.0x2 \
--device ich9-usb-ehci1,id=usb2,bus=pci.0,multifunction=on,addr=0x5.0x7 \
--device ich9-usb-uhci1,masterbus=usb2.0,firstport=0,bus=pci.0,multifunction=on,addr=0x5.0x0 \
--device ich9-usb-uhci2,masterbus=usb2.0,firstport=2,bus=pci.0,multifunction=on,addr=0x5.0x1 \
--device ich9-usb-uhci3,masterbus=usb2.0,firstport=4,bus=pci.0,multifunction=on,addr=0x5.0x2 \
+-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
+-device ich9-usb-ehci1,id=usb1,bus=pci.0,addr=0x4.0x7 \
+-device ich9-usb-uhci1,masterbus=usb1.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4 \
+-device ich9-usb-uhci2,masterbus=usb1.0,firstport=2,bus=pci.0,addr=0x4.0x1 \
+-device ich9-usb-uhci3,masterbus=usb1.0,firstport=4,bus=pci.0,addr=0x4.0x2 \
+-device ich9-usb-ehci1,id=usb2,bus=pci.0,addr=0x5.0x7 \
+-device ich9-usb-uhci1,masterbus=usb2.0,firstport=0,bus=pci.0,multifunction=on,addr=0x5 \
+-device ich9-usb-uhci2,masterbus=usb2.0,firstport=2,bus=pci.0,addr=0x5.0x1 \
+-device ich9-usb-uhci3,masterbus=usb2.0,firstport=4,bus=pci.0,addr=0x5.0x2 \
-device usb-hub,id=hub0,bus=usb1.0,port=1 \
-device usb-tablet,id=input0,bus=usb.0,port=2 \
-device usb-host,hostbus=14,hostaddr=6,id=hostdev0,bus=usb2.0,port=1 \
-device usb-host,hostbus=14,hostaddr=7,id=hostdev1,bus=usb2.0,port=2 \
--device virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x3.0x0
+-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml b/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml
index e8ada4d..b12b841 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml
+++ b/tests/qemuxml2argvdata/qemuxml2argv-usb1-usb2.xml
@@ -21,7 +21,7 @@
</controller>
<controller type='usb' index='1' model='ich9-uhci1'>
<master startport='0'/>
- <address type='pci' domain='0' bus='0' slot='4' function='0'/>
+ <address type='pci' domain='0' bus='0' slot='4' function='0' multifunction='on'/>
</controller>
<controller type='usb' index='1' model='ich9-uhci2'>
<master startport='2'/>
@@ -37,7 +37,7 @@
</controller>
<controller type='usb' index='2' model='ich9-uhci1'>
<master startport='0'/>
- <address type='pci' domain='0' bus='0' slot='5' function='0'/>
+ <address type='pci' domain='0' bus='0' slot='5' function='0' multifunction='on'/>
</controller>
<controller type='usb' index='2' model='ich9-uhci2'>
<master startport='2'/>
--
1.7.3.4
More information about the libvir-list
mailing list