[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] [PATCH 0/1] Add VLAN capability to openvswitch virtualport types



How would one specify VLAN trunk mode with only one vlan tag present?

On Wed, Aug 8, 2012 at 2:47 PM, Kyle Mestery <kmestery cisco com> wrote:
> With this change, it is now possible to support VLANs (both access and trunks)
> for openvswitch ports in libvirt. This also takes into account the profileid
> parameter, as the vlantag parameter is also optional.
>
> Examples of this configuration are below.
>
> Setup the port as an access port:
>
> <interface type='bridge'>
>   <mac address='52:54:00:30:23:a6'/>
>   <source bridge='data-br'/>
>   <virtualport type='openvswitch'>
>     <parameters interfaceid='cdbbbc31-b7fe-16ca-a715-cc7cc76e18b2' vlantag='70'/>
>   </virtualport>
>   <model type='virtio'/>
>   <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
> </interface>
>
> Setup the port as an trunk port:
>
> <interface type='bridge'>
>   <mac address='52:54:00:30:23:a6'/>
>   <source bridge='data-br'/>
>   <virtualport type='openvswitch'>
>     <parameters interfaceid='cdbbbc31-b7fe-16ca-a715-cc7cc76e18b2' vlantag='70,71,72'/>
>   </virtualport>
>   <model type='virtio'/>
>   <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
> </interface>
>
>  src/conf/netdev_vport_profile_conf.c | 34 ++++++++++++++++++++++++++++++----
>  src/util/virnetdevopenvswitch.c      | 23 +++++++++++++++++++++--
>  src/util/virnetdevvportprofile.h     |  2 ++
>  3 files changed, 53 insertions(+), 6 deletions(-)
>
> --
> 1.7.11.2
>
> --
> libvir-list mailing list
> libvir-list redhat com
> https://www.redhat.com/mailman/listinfo/libvir-list


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]