[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] Modern CPU models cannot be used with libvirt



On Fri, Mar 09, 2012 at 09:04:03PM +0000, Daniel P. Berrange wrote:
> On Fri, Mar 09, 2012 at 05:56:52PM -0300, Eduardo Habkost wrote:
> > Resurrecting an old thread:
> > 
> > I didn't see any clear conclusion in this thread (this is why I am
> > resurrecting it), except that many were arguing that libvirt should
> > simply copy and/or generate the CPU model definitions from Qemu. I
> > really don't think it's reasonable to expect that.
> > 
> > On Thu, Dec 15, 2011 at 03:54:15PM +0100, Jiri Denemark wrote:
> > > Hi,
> > > 
> > > Recently I realized that all modern CPU models defined in
> > > /etc/qemu/target-x86_64.conf are useless when qemu is used through libvirt.
> > > That's because we start qemu with -nodefconfig which results in qemu ignoring
> > > that file with CPU model definitions. We have a very good reason for using
> > > -nodefconfig because we need to control the ABI presented to a guest OS and we
> > > don't want any configuration file that can contain lots of things including
> > > device definitions to be read by qemu. However, we would really like the new
> > > CPU models to be understood by qemu even if used through libvirt. What would
> > > be the best way to solve this?
> > > 
> > > I suspect this could have been already discussed in the past but obviously a
> > > workable solution was either not found or just not implemented.
> > 
> > So, our problem today is basically:
> > 
> > A) libvirt uses -nodefconfig;
> > B) -nodefconfig makes Qemu not load the config file containing the CPU
> >    model definitions; and
> > C) libvirt expects the full CPU model list from Qemu to be available.
> 
> I could have sworn we had this discussion a year ago or so, and had decided
> that the default CPU models would be in something like /usr/share/qemu/cpu-x86_64.conf
> and loaded regardless of the -nodefconfig setting. /etc/qemu/target-x86_64.conf
> would be solely for end user configuration changes, not for QEMU builtin
> defaults.
> 
> But looking at the code in QEMU, it doesn't seem we ever implemented this ?

Arrrgggh. It seems this was implemented as a patch in RHEL-6 qemu RPMs but,
contrary to our normal RHEL development practice, it was not based on
a cherry-pick of an upstream patch :-(

For sake of reference, I'm attaching the two patches from the RHEL6 source
RPM that do what I'm describing

NB, I'm not neccessarily advocating these patches for upstream. I still
maintain that libvirt should write out a config file containing the
exact CPU model description it desires and specify that with -readconfig.
The end result would be identical from QEMU's POV and it would avoid
playing games with QEMU's config loading code.

Regards,
Daniel
-- 
|: http://berrange.com      -o-    http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org              -o-             http://virt-manager.org :|
|: http://autobuild.org       -o-         http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org       -o-       http://live.gnome.org/gtk-vnc :|
>From ab8e4c035638685f1e579ce472dd8b4c957f8097 Mon Sep 17 00:00:00 2001
From: john cooper <john cooper redhat com>
Date: Thu, 8 Jul 2010 04:17:13 -0300
Subject: [PATCH 1/3] Move CPU definitions to /usr/share/... BZ #610805

RH-Author: john cooper <john cooper redhat com>
Message-id: <4C355149 2050800 redhat com>
Patchwork-id: 10557
O-Subject: [RHEL6 PATCH] Move CPU definitions to /usr/share/...  BZ #610805
Bugzilla: 610805
RH-Acked-by: Markus Armbruster <armbru redhat com>
RH-Acked-by: Jes Sorensen <Jes Sorensen redhat com>
RH-Acked-by: Juan Quintela <quintela redhat com>

Description:

libvirt requested the cpu model configuration file be
relocated to /usr/share to more clearly signify it
was not to be modified by users.  In addition the
model file is now loaded even in the presence of the
"-nodefconfig" command line flag.

Note this is intended as an interim work-around for
rhel6.0.  While the new location of the config file
should remain the same, the mechanism to direct qemu
to it will likely differ going forward.

Minor Caveat:

Although the model definitions have moved from
/etc/qemu/target-x86_64.conf to /usr/share/qemu-kvm/cpu-model/cpu-x86_64.conf
an open of the former default config file is still attempted
by qemu.  In a new installation of the rpm this is a
non-issue as well as when "-nodefconfig" is specified.
However if the former config file exists, and is allowed
to be read, and and contains model definitions conflicting
with those in cpu-x86_64.conf, they will override those
from the new config file.  This realistically is only an
issue for development testing and may be detected by
"-readconfig ?" which will indicate when the old file had
been found or "-cpu ?" which will display replicated model
definitions.

Verification:

# /usr/libexec/qemu-kvm -nodefconfig -readconfig ? -cpu ?
parsed config file /usr/share/qemu-kvm/cpu-model/cpu-x86_64.conf
x86       Opteron_G3
x86       Opteron_G2
x86       Opteron_G1
x86          Nehalem
x86           Penryn
x86           Conroe
x86           [n270]
x86         [athlon]
x86       [pentium3]
x86       [pentium2]
x86        [pentium]
x86            [486]
x86        [coreduo]
x86         [qemu32]
x86          [kvm64]
x86       [core2duo]
x86         [phenom]
x86         [qemu64]

Brew build:

http://brewweb.devel.redhat.com/brew/taskinfo?taskID=2581001

Signed-off-by: john cooper <john cooper redhat com>
---

Move cpu model config to /usr/share/qemu-kvm/cpu-model.
Enforce loading at startup.
Add cpu model config path to specfile.

Signed-off-by: Eduardo Habkost <ehabkost redhat com>
---
 Makefile                             |    8 ++--
 configure                            |    9 ++++
 sysconfigs/target/cpu-x86_64.conf    |   85 ++++++++++++++++++++++++++++++++++
 sysconfigs/target/target-x86_64.conf |   85 ----------------------------------
 vl.c                                 |    7 +++
 6 files changed, 109 insertions(+), 90 deletions(-)
 create mode 100644 sysconfigs/target/cpu-x86_64.conf
 delete mode 100644 sysconfigs/target/target-x86_64.conf

diff --git a/Makefile b/Makefile
index c1dadd0..d147632 100644
--- a/Makefile
+++ b/Makefile
@@ -319,11 +319,11 @@ ifdef CONFIG_POSIX
 	$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
 endif
 
-install-sysconfig:
-	$(INSTALL_DIR) "$(sysconfdir)/qemu"
-	$(INSTALL_DATA) sysconfigs/target/target-x86_64.conf "$(sysconfdir)/qemu"
+install-cpuconfig:
+	$(INSTALL_DIR) "$(DESTDIR)$(cpuconfdir)"
+	$(INSTALL_DATA) sysconfigs/target/cpu-x86_64.conf "$(DESTDIR)$(cpuconfdir)"
 
-install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig
+install: all $(if $(BUILD_DOCS),install-doc) install-cpuconfig
 	$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
 ifneq ($(TOOLS),)
 	$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
diff --git a/configure b/configure
index 9e62b0d..be78a0c 100755
--- a/configure
+++ b/configure
@@ -33,6 +33,7 @@ prefix=""
 interp_prefix="/usr/gnemul/qemu-%M"
 static="no"
 sysconfdir=""
+cpuconfdir=""
 sparc_cpu=""
 cross_prefix=""
 cc="gcc"
@@ -480,6 +481,8 @@ for opt do
   ;;
   --sysconfdir=*) sysconfdir="$optarg"
   ;;
+  --cpuconfdir=*) cpuconfdir="$optarg"
+  ;;
   --disable-sdl) sdl="no"
   ;;
   --enable-sdl) sdl="yes"
@@ -739,6 +742,7 @@ echo "  --make=MAKE              use specified make [$make]"
 echo "  --install=INSTALL        use specified install [$install]"
 echo "  --static                 enable static build [$static]"
 echo "  --sysconfdir=PATH        install config in PATH"
+echo "  --cpuconfdir=PATH        install cpu model config in PATH"
 echo "  --enable-debug-tcg       enable TCG debugging"
 echo "  --disable-debug-tcg      disable TCG debugging (default)"
 echo "  --enable-debug           enable common debug build options"
@@ -2058,6 +2062,9 @@ else
   if test -z "$sysconfdir" ; then
       sysconfdir="${prefix}/etc"
   fi
+  if test -z "$cpuconfdir" ; then
+      cpuconfdir="$sysconfdir/qemu"
+  fi
 fi
 
 if test -f kvm/kernel/configure; then
@@ -2159,6 +2166,7 @@ if test "$mingw32" = "yes" ; then
   echo "CONFIG_QEMU_CONFDIR=\"$sysconfdir\"" >> $config_host_mak
 else
   echo "CONFIG_QEMU_CONFDIR=\"${sysconfdir}/qemu\"" >> $config_host_mak
+  echo "CONFIG_QEMU_CPUCONFDIR=\"${cpuconfdir}\"" >> $config_host_mak
 fi
 
 case "$cpu" in
@@ -2426,6 +2434,7 @@ echo "bindir=\${prefix}$binsuffix" >> $config_host_mak
 echo "mandir=\${prefix}$mansuffix" >> $config_host_mak
 echo "datadir=\${prefix}$datasuffix" >> $config_host_mak
 echo "sysconfdir=$sysconfdir" >> $config_host_mak
+echo "cpuconfdir=$cpuconfdir" >> $config_host_mak
 echo "docdir=\${prefix}$docsuffix" >> $config_host_mak
 echo "MAKE=$make" >> $config_host_mak
 echo "INSTALL=$install" >> $config_host_mak
diff --git a/sysconfigs/target/cpu-x86_64.conf b/sysconfigs/target/cpu-x86_64.conf
new file mode 100644
index 0000000..ca07088
--- /dev/null
+++ b/sysconfigs/target/cpu-x86_64.conf
@@ -0,0 +1,85 @@
+# x86 CPU MODELS
+
+[cpudef]
+   name = "Conroe"
+   level = "2"
+   vendor = "GenuineIntel"
+   family = "6"
+   model = "2"
+   stepping = "3"
+   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
+   feature_ecx = "sse3 ssse3 x2apic"
+   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx"
+   extfeature_ecx = "lahf_lm"
+   xlevel = "0x8000000A"
+   model_id = "Intel Celeron_4x0 (Conroe/Merom Class Core 2)"
+
+[cpudef]
+   name = "Penryn"
+   level = "2"
+   vendor = "GenuineIntel"
+   family = "6"
+   model = "2"
+   stepping = "3"
+   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
+   feature_ecx = "sse3 cx16 ssse3 sse4.1 x2apic"
+   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx"
+   extfeature_ecx = "lahf_lm"
+   xlevel = "0x8000000A"
+   model_id = "Intel Core 2 Duo P9xxx (Penryn Class Core 2)"
+
+[cpudef]
+   name = "Nehalem"
+   level = "2"
+   vendor = "GenuineIntel"
+   family = "6"
+   model = "2"
+   stepping = "3"
+   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
+   feature_ecx = "sse3 cx16 ssse3 sse4.1 sse4.2 x2apic popcnt"
+   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx"
+   extfeature_ecx = "lahf_lm"
+   xlevel = "0x8000000A"
+   model_id = "Intel Core i7 9xx (Nehalem Class Core i7)"
+
+[cpudef]
+   name = "Opteron_G1"
+   level = "5"
+   vendor = "AuthenticAMD"
+   family = "15"
+   model = "6"
+   stepping = "1"
+   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
+   feature_ecx = "sse3"
+   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx"
+#   extfeature_ecx = ""
+   xlevel = "0x80000008"
+   model_id = "AMD Opteron 240 (Gen 1 Class Opteron)"
+
+[cpudef]
+   name = "Opteron_G2"
+   level = "5"
+   vendor = "AuthenticAMD"
+   family = "15"
+   model = "6"
+   stepping = "1"
+   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
+   feature_ecx = "sse3 cx16"
+   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx rdtscp"
+   extfeature_ecx = "svm lahf_lm"
+   xlevel = "0x80000008"
+   model_id = "AMD Opteron 22xx (Gen 2 Class Opteron)"
+
+[cpudef]
+   name = "Opteron_G3"
+   level = "5"
+   vendor = "AuthenticAMD"
+   family = "15"
+   model = "6"
+   stepping = "1"
+   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
+   feature_ecx = "sse3 cx16 monitor popcnt"
+   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx rdtscp"
+   extfeature_ecx = "svm sse4a  abm misalignsse lahf_lm"
+   xlevel = "0x80000008"
+   model_id = "AMD Opteron 23xx (Gen 3 Class Opteron)"
diff --git a/sysconfigs/target/target-x86_64.conf b/sysconfigs/target/target-x86_64.conf
deleted file mode 100644
index ca07088..0000000
--- a/sysconfigs/target/target-x86_64.conf
+++ /dev/null
@@ -1,85 +0,0 @@
-# x86 CPU MODELS
-
-[cpudef]
-   name = "Conroe"
-   level = "2"
-   vendor = "GenuineIntel"
-   family = "6"
-   model = "2"
-   stepping = "3"
-   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
-   feature_ecx = "sse3 ssse3 x2apic"
-   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx"
-   extfeature_ecx = "lahf_lm"
-   xlevel = "0x8000000A"
-   model_id = "Intel Celeron_4x0 (Conroe/Merom Class Core 2)"
-
-[cpudef]
-   name = "Penryn"
-   level = "2"
-   vendor = "GenuineIntel"
-   family = "6"
-   model = "2"
-   stepping = "3"
-   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
-   feature_ecx = "sse3 cx16 ssse3 sse4.1 x2apic"
-   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx"
-   extfeature_ecx = "lahf_lm"
-   xlevel = "0x8000000A"
-   model_id = "Intel Core 2 Duo P9xxx (Penryn Class Core 2)"
-
-[cpudef]
-   name = "Nehalem"
-   level = "2"
-   vendor = "GenuineIntel"
-   family = "6"
-   model = "2"
-   stepping = "3"
-   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
-   feature_ecx = "sse3 cx16 ssse3 sse4.1 sse4.2 x2apic popcnt"
-   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx"
-   extfeature_ecx = "lahf_lm"
-   xlevel = "0x8000000A"
-   model_id = "Intel Core i7 9xx (Nehalem Class Core i7)"
-
-[cpudef]
-   name = "Opteron_G1"
-   level = "5"
-   vendor = "AuthenticAMD"
-   family = "15"
-   model = "6"
-   stepping = "1"
-   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
-   feature_ecx = "sse3"
-   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx"
-#   extfeature_ecx = ""
-   xlevel = "0x80000008"
-   model_id = "AMD Opteron 240 (Gen 1 Class Opteron)"
-
-[cpudef]
-   name = "Opteron_G2"
-   level = "5"
-   vendor = "AuthenticAMD"
-   family = "15"
-   model = "6"
-   stepping = "1"
-   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
-   feature_ecx = "sse3 cx16"
-   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx rdtscp"
-   extfeature_ecx = "svm lahf_lm"
-   xlevel = "0x80000008"
-   model_id = "AMD Opteron 22xx (Gen 2 Class Opteron)"
-
-[cpudef]
-   name = "Opteron_G3"
-   level = "5"
-   vendor = "AuthenticAMD"
-   family = "15"
-   model = "6"
-   stepping = "1"
-   feature_edx = "sse2 sse fxsr mmx pat cmov pge sep apic cx8 mce pae msr tsc pse de fpu    mtrr clflush mca pse36"
-   feature_ecx = "sse3 cx16 monitor popcnt"
-   extfeature_edx = "fxsr mmx pat cmov pge apic cx8 mce pae msr tsc pse de fpu    lm syscall nx rdtscp"
-   extfeature_ecx = "svm sse4a  abm misalignsse lahf_lm"
-   xlevel = "0x80000008"
-   model_id = "AMD Opteron 23xx (Gen 3 Class Opteron)"
diff --git a/vl.c b/vl.c
index a3b682d..eb993d6 100644
--- a/vl.c
+++ b/vl.c
@@ -5141,6 +5141,13 @@ int main(int argc, char **argv, char **envp)
         }
     }
 
+    /* load local cpu config, NB: may possibly be overridden by defconfigs
+     */
+    if (qemu_read_config_file(
+        CONFIG_QEMU_CPUCONFDIR "/cpu-" TARGET_ARCH ".conf",
+        defconfig_verbose) == -EINVAL) {
+            exit(1);
+    }
     if (defconfig) {
         int ret;
 
-- 
1.7.0.3

>From 4eb647d7081b3090ba949a129756f7f7a42abf5a Mon Sep 17 00:00:00 2001
From: john cooper <john cooper redhat com>
Date: Sat, 11 Dec 2010 04:30:10 -0200
Subject: [PATCH 01/24] Bug #625333 - qemu treatment of -nodefconfig and -readconfig problematic for debug

RH-Author: john cooper <john cooper redhat com>
Message-id: <4D02FE52 7050405 redhat com>
Patchwork-id: 14538
O-Subject: [RHEL6.1 PATCH v3] Bug #625333 - qemu treatment of -nodefconfig and
	-readconfig problematic for debug
Bugzilla: 625333
RH-Acked-by: Amit Shah <amit shah redhat com>
RH-Acked-by: Marcelo Tosatti <mtosatti redhat com>
RH-Acked-by: Alex Williamson <alex williamson redhat com>

The prior version of this patch had the side effect of allowing a
-readconfig specified config file to be overridden by a wired-in
default config file.  Although this scenario would not occur in
the context of a libvirt launch, altering semantics relative to
upstream qemu is best avoided.

Details:

The problem is qemu currently has only two discrete scans of CLI
arguments.  Trying to live within that structure while supporting
flags which affect other flags is problematic.  Qemu attempts to
implement flag semantics simultaneous with their parsing.  As such
semantic actions follow the unpredictable sequence of args appearing
on the command like.

This patch therefore enforces consistent ordering of the following
semantics as:

- interpret config file parse modifiers
- conditionally read default qemu configs
- read local cpu config
- read any -readconfig configs
- interpret all other options

Testing:

- The config file processing order above should be in effect.
  Specifically an identical data item in a later config file
  should redefine the same introduced by a prior config file.

- Default and local config files may or may not exist on the
  host.  If they do not exist, they are quietly ignored unless
  verbose handling by "-readconfig ?" is specified.  However if
  any do exist and contain config file format errors, qemu will
  error exit.

- Handling of config files specified by "-readconfig <file>"
  is the same as default/local config files with the addition
  qemu will error exit if <file> cannot be opened for read.

- any sequence of "-readconfig" | "-nodefconfig" | "-cpu" has the
  same effect irrespective of relative location in the command line

Upstream Status:

This patch has seen modification in the process of trying to push it
upstream, which resulted in minor syntax changes to the CLI.  We will
need to accommodate this when we rebase qemu.

Signed-off-by: john cooper <john cooper redhat com>
---

Signed-off-by: Luiz Capitulino <lcapitulino redhat com>
---
 vl.c |   51 ++++++++++++++++++++++++++++++++++++++-------------
 1 files changed, 38 insertions(+), 13 deletions(-)

diff --git a/vl.c b/vl.c
index 734a5b2..cac6921 100644
--- a/vl.c
+++ b/vl.c
@@ -5325,7 +5325,8 @@ int main(int argc, char **argv, char **envp)
     tb_size = 0;
     autostart= 1;
 
-    /* first pass of option parsing */
+    /* first pass of CLI options -- interpret config file parse modifiers
+     */
     optind = 1;
     while (optind < argc) {
         if (argv[optind][0] != '-') {
@@ -5349,13 +5350,8 @@ int main(int argc, char **argv, char **envp)
         }
     }
 
-    /* load local cpu config, NB: may possibly be overridden by defconfigs
+    /* pull in default configs unless explicitly disabled
      */
-    if (qemu_read_config_file(
-        CONFIG_QEMU_CPUCONFDIR "/cpu-" TARGET_ARCH ".conf",
-        defconfig_verbose) == -EINVAL) {
-            exit(1);
-    }
     if (defconfig) {
         int ret;
 
@@ -5372,11 +5368,45 @@ int main(int argc, char **argv, char **envp)
             exit(1);
         }
     }
+
+    /* load local cpu config
+     */
+    if (qemu_read_config_file(
+        CONFIG_QEMU_CPUCONFDIR "/cpu-" TARGET_ARCH ".conf",
+        defconfig_verbose) == -EINVAL) {
+            exit(1);
+    }
+
+    /* second pass of CLI options -- bring in any -readconfig flags
+     */
+    optind = 1;
+    while (optind < argc) {
+        if (argv[optind][0] != '-') {
+            /* disk image */
+            optind++;
+            continue;
+        } else {
+            const QEMUOption *popt;
+
+            popt = lookup_opt(argc, argv, &optarg, &optind);
+            switch (popt->index) {
+            case QEMU_OPTION_readconfig:
+                /* pull in cli specified config files in advance of general
+                 * flag parsing which may reference their content
+                 */
+                if (strcmp(optarg, "?") &&
+                    qemu_read_config_file(optarg, defconfig_verbose) < 0)
+                        exit(1);
+                break;
+            }
+        }
+    }
 #if defined(cpudef_setup)
     cpudef_setup(); /* parse cpu definitions in target config file */
 #endif
 
-    /* second pass of option parsing */
+    /* third pass of CLI options -- general flag interpretation
+     */
     optind = 1;
     for(;;) {
         if (optind >= argc)
@@ -6084,11 +6114,6 @@ int main(int argc, char **argv, char **envp)
                 xen_mode = XEN_ATTACH;
                 break;
 #endif
-            case QEMU_OPTION_readconfig:
-                if (!!strcmp(optarg, "?") &&
-                    qemu_read_config_file(optarg, defconfig_verbose) < 0)
-                        exit(1);
-                break;
             case QEMU_OPTION_spice:
                 olist = qemu_find_opts("spice");
                 if (!olist) {
-- 
1.7.4.rc1.16.gd2f15e


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]