[libvirt] [PATCH] Refactor the libvirt RPM daemon pieces
Dave Allan
dallan at redhat.com
Fri Mar 30 15:09:50 UTC 2012
On Fri, Mar 30, 2012 at 02:22:01PM +0100, Daniel P. Berrange wrote:
> From: "Daniel P. Berrange" <berrange at redhat.com>
>
> NB: this is in response to a Fedora 17 beta blocker bug.
> Currently gnome-boxes depends on 'libvirt' which pulls
> in the default virtual network, which kills networking
> if you install Fedora 17 inside a KVM guest.
>
> There are a number of flaws with our packaging of the libvirtd
> daemon:
>
> - Installing 'libvirt' does not install 'qemu-kvm' or 'xen'
> etc which are required to actually run the hypervisor in
> question
> - Installing 'libvirt' pulls in the default configuration
> files which may not be wanted & cause problems if installed
> inside a guest
> - It is not possible to explicitly required all the peices
> required to manage a specific hypervisor
>
> This change takes the 'libvirt' RPM and and changes it thus
>
> - libvirt: just a virtual package with dep on libvirt-daemon and
> libvirt-daemon-configs
> - libvirt-daemon: the libvirt daemon and related pieces
> - libvirt-daemon-configs: the default network & filter configs
> - libvirt-docs: the website HTML
>
> We then introduce some more virtual (empty) packages
>
> - libvirt-daemon-qemu: Deps on libvirt-daemon & 'qemu'
> - libvirt-daemon-kvm: Deps on libvirt-daemon & 'qemu-kvm'
> - libvirt-daemon-lxc: Deps on libvirt-daemon
> - libvirt-daemon-uml: Deps on libvirt-daemon
> - libvirt-daemon-xen: Deps on libvirt-daemon & 'xen'
>
> - libvirt-qemu: Deps on libvirt-daemon-qemu & libvirt-daemon-configs
> - libvirt-kvm: Deps on libvirt-daemon-kvm & libvirt-daemon-configs
> - libvirt-lxc: Deps on libvirt-daemon-lxc & libvirt-daemon-configs
> - libvirt-uml: Deps on libvirt-daemon-uml & libvirt-daemon-configs
> - libvirt-xen: Deps on libvirt-daemon-xen & libvirt-daemon-configs
>
> My intent in the future is to turn on the driver modules by
> default, at which time 'libvirt-daemon' will cease to include
> any specific drivers, instead we'll get libvirt-daemon-driver-XXXX
> packages for each driver. The libvirt-daemon-XXX packages will
> then pull in each driver that they require.
>
> It is recommended that applications required a locally installed
> libvirtd daemon, use either 'Requires: libvirt-daemon-XXXX' or
> 'Requires: libvirt-XXX' and *not* "Requires: libvirt-daemon"
> or 'Requires: libvirt'
I'm not an RPM wizard, so I cannot evaluate the changes, but ACK to
the design, I think it's a great change.
Dave
> * libvirt.spec.in: Refactor RPMs
> * docs/packaging.html.in, docs/sitemap.html.in: Document
> new RPM split rationale
> ---
> docs/packaging.html.in | 100 ++++++++++
> docs/sitemap.html.in | 4 +
> libvirt.spec.in | 474 +++++++++++++++++++++++++++++++++++-------------
> 3 files changed, 456 insertions(+), 122 deletions(-)
> create mode 100644 docs/packaging.html.in
>
> diff --git a/docs/packaging.html.in b/docs/packaging.html.in
> new file mode 100644
> index 0000000..2e4abf7
> --- /dev/null
> +++ b/docs/packaging.html.in
> @@ -0,0 +1,100 @@
> +<?xml version="1.0"?>
> +<html>
> + <body>
> + <h1>Distribution packaging</h1>
> +
> + <ul id="toc"></ul>
> +
> + <p>
> + This page describes the rationale behind the libvirt distribution
> +packaging in RPM format. The RPM specfile provided with libvirt targets
> +all Fedora and RHEL releases. It is split up into a number of sub-RPMs
> +in order to facilitate minimal installations, targetting specific
> +feature sets.
> + </p>
> +
> + <h2>Real packages</h2>
> +
> + <p>
> + The so called "real" packages provide the actual file payloads
> + related to libvirt. If very specific / targetted functionality
> + is required, then applications can depend on one or more of these
> + real packages.
> + </p>
> +
> + <dl>
> + <dt>libvirt-client</dt>
> + <dd>This package provides the main libvirt.so library along with the virsh command line tool.
> + If a C based application only wants to be able to manage remote hypervisors, this is all
> + that they need depend on</dd>
> + <dt>libvirt-devel</dt>
> + <dd>This package provides the header files and libraries required to compile and link C
> + applications using libvirt</dd>
> + <dt>libvirt-python</dt>
> + <dd>This package provides the Python binding to the C libraries. It will pull in the libvirt-client
> + RPM. If a Python application only wants to be able to manage remote hypervisors, this is all that
> + they need depend on</dd>
> + <dt>libvirt-daemon</dt>
> + <dd>This package provides server side libvirtd daemon, which is required in order to
> + manage any stateful hypervisors (currently QEMU, KVM, Xen, LXC and UML).</dd>
> + <dt>libvirt-daemon-configs</dt>
> + <dd>This package provides the standard configuration files for setting up a NAT
> + based network, and network filter rules for ensuring clean VM traffic.</dd>
> + </dl>
> +
> + <h2>Virtual packages</h2>
> +
> + <p>
> + The virtual packages provide convenient targets for application dependencies to
> + pull in functionality related to specific hypervisors. Since the packaging of
> + the <code>libvirt-daemon</code> RPM is expected to change in the future to split
> + each hypervisor driver out into a separate RPM, applications are strongly
> + recommended to depend on one of the following virtual packages, instead of
> + depending directly on <code>libvirt-daemon</code>
> + </p>
> +
> + <dl>
> + <dt>libvirt</dt>
> + <dd>This package, simply pulls in every single other server side RPM.
> + If an application wants to ensure all possible libvirt drivers are installed,
> + this is what they should depend on</dd>
> +
> + <dt>libvirt-daemon-qemu</dt>
> + <dd>This package pulls in the server side daemon, drivers and the QEMU TCG binaries
> + required to provide emulation of non-native architectures</dd>
> + <dt>libvirt-daemon-kvm</dt>
> + <dd>This package pulls in the server side daemon, drivers and the KVM binaries
> + required to provide hardware accelerated virtualization of the native
> + architectures</dd>
> + <dt>libvirt-daemon-lxc</dt>
> + <dd>This package pulls in the server side daemon and drivers required to
> + run native Linux containers</dd>
> + <dt>libvirt-daemon-uml</dt>
> + <dd>This package pulls in the server side daemon and drivers required to
> + run User Mode Linux. The application must still provide the actual
> + UML binary kenrels</dd>
> + <dt>libvirt-daemon-xen</dt>
> + <dd>This package pulls in the server side daemon and drivers required to
> + run guests on the Xen hypervisor.</dd>
> +
> + <dt>libvirt-qemu</dt>
> + <dd>This package pulls in the server side daemon, drivers and the QEMU TCG binaries
> + required to provide emulation of non-native architectures</dd>
> + <dt>libvirt-kvm</dt>
> + <dd>This package pulls in the server side daemon, drivers and the KVM binaries
> + required to provide hardware accelerated virtualization of the native
> + architectures</dd>
> + <dt>libvirt-lxc</dt>
> + <dd>This package pulls in the server side daemon, drivers and default
> + configuration files required to run native Linux containers</dd>
> + <dt>libvirt-uml</dt>
> + <dd>This package pulls in the server side daemon, drivers and default
> + configuration files required to run User Mode Linux. The application
> + must still provide the actual UML binary kenrels</dd>
> + <dt>libvirt-xen</dt>
> + <dd>This package pulls in the server side daemon, drivers and default
> + configuration files required to run guests on the Xen hypervisor.</dd>
> + </dl>
> +
> + </body>
> +</html>
> diff --git a/docs/sitemap.html.in b/docs/sitemap.html.in
> index 1de2b20..620c989 100644
> --- a/docs/sitemap.html.in
> +++ b/docs/sitemap.html.in
> @@ -84,6 +84,10 @@
> <a href="hooks.html">Hooks</a>
> <span>Hooks for system specific management</span>
> </li>
> + <li>
> + <a href="packaging.html">Distribution packaging</a>
> + <span>Rationale for distribution RPM packaging</span>
> + </li>
> </ul>
> </li>
> <li>
> diff --git a/libvirt.spec.in b/libvirt.spec.in
> index 67f1c33..743d43e 100644
> --- a/libvirt.spec.in
> +++ b/libvirt.spec.in
> @@ -52,6 +52,14 @@
> %define with_libxl 0%{!?_without_libxl:%{server_drivers}}
> %define with_vmware 0%{!?_without_vmware:%{server_drivers}}
>
> +%define with_qemu_tcg %{with_qemu}
> +# Change if we ever provide qemu-kvm binaries on non-x86 hosts
> +%ifarch %{ix86} x86_64
> +%define with_qemu_kvm %{with_qemu}
> +%else
> +%define with_qemu_kvm 0
> +%endif
> +
> # Then the hypervisor drivers that talk via a native remote protocol
> %define with_phyp 0%{!?_without_phyp:1}
> %define with_esx 0%{!?_without_esx:1}
> @@ -125,8 +133,10 @@
>
> # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
> %if 0%{?rhel} == 5
> +%define with_qemu_tcg 0
> %ifnarch x86_64
> %define with_qemu 0
> +%define with_qemu_kvm 0
> %endif
> %define with_lxc 0
> %endif
> @@ -134,8 +144,10 @@
> # RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
> # on all archs. Other archs all have LXC available though
> %if 0%{?rhel} >= 6
> +%define with_qemu_tcg 0
> %ifnarch x86_64
> %define with_qemu 0
> +%define with_qemu_kvm 0
> %endif
> %define with_xen 0
> %endif
> @@ -268,109 +280,17 @@ Source: http://libvirt.org/sources/libvirt-%{version}.tar.gz
> BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
> URL: http://libvirt.org/
>
> -# All runtime requirements for the libvirt package (runtime requrements
> -# for subpackages are listed later in those subpackages)
> -
> -# The client side, i.e. shared libs and virsh are in a subpackage
> -Requires: %{name}-client = %{version}-%{release}
> -
> -# Used by many of the drivers, so turn it on whenever the
> -# daemon is present
> %if %{with_libvirtd}
> -# for modprobe of pci devices
> -Requires: module-init-tools
> -# for /sbin/ip & /sbin/tc
> -Requires: iproute
> -%if %{with_avahi}
> -Requires: avahi-libs
> -%endif
> -%endif
> -%if %{with_network}
> -Requires: dnsmasq >= 2.41
> -Requires: radvd
> -%endif
> -%if %{with_network} || %{with_nwfilter}
> -Requires: iptables
> -Requires: iptables-ipv6
> -%endif
> -%if %{with_nwfilter}
> -Requires: ebtables
> -%endif
> -# needed for device enumeration
> -%if %{with_hal}
> -Requires: hal
> -%endif
> -%if %{with_udev}
> -Requires: udev >= 145
> -%endif
> -%if %{with_polkit}
> -%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
> -Requires: polkit >= 0.93
> -%else
> -Requires: PolicyKit >= 0.6
> -%endif
> -%endif
> -%if %{with_storage_fs}
> -Requires: nfs-utils
> -# For mkfs
> -Requires: util-linux-ng
> -# For pool-build probing for existing pools
> -BuildRequires: libblkid-devel >= 2.17
> -# For glusterfs
> -%if 0%{?fedora} >= 11
> -Requires: glusterfs-client >= 2.0.1
> -%endif
> -%endif
> -%if %{with_qemu}
> -# From QEMU RPMs
> -Requires: /usr/bin/qemu-img
> -# For image compression
> -Requires: gzip
> -Requires: bzip2
> -Requires: lzop
> -Requires: xz
> -%else
> -%if %{with_xen}
> -# From Xen RPMs
> -Requires: /usr/sbin/qcow-create
> -%endif
> -%endif
> -%if %{with_storage_lvm}
> -# For LVM drivers
> -Requires: lvm2
> -%endif
> -%if %{with_storage_iscsi}
> -# For ISCSI driver
> -Requires: iscsi-initiator-utils
> -%endif
> -%if %{with_storage_disk}
> -# For disk driver
> -Requires: parted
> -Requires: device-mapper
> -%endif
> -%if %{with_storage_mpath}
> -# For multipath support
> -Requires: device-mapper
> -%endif
> -%if %{with_cgconfig}
> -Requires: libcgroup
> -%endif
> -%ifarch %{ix86} x86_64 ia64
> -# For virConnectGetSysinfo
> -Requires: dmidecode
> -%endif
> -# For service management
> -%if %{with_systemd}
> -Requires(post): systemd-units
> -Requires(post): systemd-sysv
> -Requires(preun): systemd-units
> -Requires(postun): systemd-units
> -%endif
> -%if %{with_numad}
> -Requires: numad
> +Requires: libvirt-daemon = %{version}-%{release}
> +Requires: libvirt-daemon-configs = %{version}-%{release}
> +# XXX when we turn on driver modules, we need to add
> +# deps on each driver (Requires: libvirt-daemon-drv-qemu)
> %endif
> +Requires: libvirt-docs = %{version}-%{release}
> +Requires: libvirt-client = %{version}-%{release}
>
> -# All build-time requirements
> +# All build-time requirements. Run-time requirements are
> +# listed against each sub-RPM
> %if 0%{?enable_autotools}
> BuildRequires: autoconf
> BuildRequires: automake
> @@ -537,6 +457,271 @@ Libvirt is a C toolkit to interact with the virtualization capabilities
> of recent versions of Linux (and other OSes). The main package includes
> the libvirtd server exporting the virtualization support.
>
> +%if %{with_libvirtd}
> +%package daemon
> +Summary: Server side daemon and supporting files for libvirt library
> +Group: Development/Libraries
> +
> +# All runtime requirements for the libvirt package (runtime requrements
> +# for subpackages are listed later in those subpackages)
> +
> +# The client side, i.e. shared libs and virsh are in a subpackage
> +Requires: %{name}-client = %{version}-%{release}
> +
> +# Used by many of the drivers, so turn it on whenever the
> +# daemon is present
> +%if %{with_libvirtd}
> +# for modprobe of pci devices
> +Requires: module-init-tools
> +# for /sbin/ip & /sbin/tc
> +Requires: iproute
> +%if %{with_avahi}
> +Requires: avahi-libs
> +%endif
> +%endif
> +%if %{with_network}
> +Requires: dnsmasq >= 2.41
> +Requires: radvd
> +%endif
> +%if %{with_network} || %{with_nwfilter}
> +Requires: iptables
> +Requires: iptables-ipv6
> +%endif
> +%if %{with_nwfilter}
> +Requires: ebtables
> +%endif
> +# needed for device enumeration
> +%if %{with_hal}
> +Requires: hal
> +%endif
> +%if %{with_udev}
> +Requires: udev >= 145
> +%endif
> +%if %{with_polkit}
> +%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
> +Requires: polkit >= 0.93
> +%else
> +Requires: PolicyKit >= 0.6
> +%endif
> +%endif
> +%if %{with_storage_fs}
> +Requires: nfs-utils
> +# For mkfs
> +Requires: util-linux-ng
> +# For pool-build probing for existing pools
> +BuildRequires: libblkid-devel >= 2.17
> +# For glusterfs
> +%if 0%{?fedora} >= 11
> +Requires: glusterfs-client >= 2.0.1
> +%endif
> +%endif
> +%if %{with_qemu}
> +# From QEMU RPMs
> +Requires: /usr/bin/qemu-img
> +# For image compression
> +Requires: gzip
> +Requires: bzip2
> +Requires: lzop
> +Requires: xz
> +%else
> +%if %{with_xen}
> +# From Xen RPMs
> +Requires: /usr/sbin/qcow-create
> +%endif
> +%endif
> +%if %{with_storage_lvm}
> +# For LVM drivers
> +Requires: lvm2
> +%endif
> +%if %{with_storage_iscsi}
> +# For ISCSI driver
> +Requires: iscsi-initiator-utils
> +%endif
> +%if %{with_storage_disk}
> +# For disk driver
> +Requires: parted
> +Requires: device-mapper
> +%endif
> +%if %{with_storage_mpath}
> +# For multipath support
> +Requires: device-mapper
> +%endif
> +%if %{with_cgconfig}
> +Requires: libcgroup
> +%endif
> +%ifarch %{ix86} x86_64 ia64
> +# For virConnectGetSysinfo
> +Requires: dmidecode
> +%endif
> +# For service management
> +%if %{with_systemd}
> +Requires(post): systemd-units
> +Requires(post): systemd-sysv
> +Requires(preun): systemd-units
> +Requires(postun): systemd-units
> +%endif
> +%if %{with_numad}
> +Requires: numad
> +%endif
> +
> +%package docs
> +Summary: Documentation for libvirt library and daemon
> +Group: Development/Libraries
> +
> +%description docs
> +Copy of the libvirt website documentation
> +
> +%description daemon
> +Server side daemon required to manage the virtualization capabilities
> +of recent versions of Linux. Requires a hypervisor specific sub-RPM
> +for specific drivers.
> +
> +%package daemon-configs
> +Summary: Default configuration files for the libvirtd daemon
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon = %{version}-%{release}
> +
> +%description daemon-configs
> +Default configuration files for setting up NAT based networking
> +and guest network traffic filtering.
> +%endif
> +
> +# XXX when we turn on driver modules, we will need to
> +# create daemon-drv-XXX sub-RPMs and add them as deps
> +# to all of the following daemon-XXX RPMs
> +
> +%if %{with_qemu_tcg}
> +%package daemon-qemu
> +Summary: Server side daemon & driver required to run QEMU guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon = %{version}-%{release}
> +Requires: qemu
> +%endif
> +
> +%if %{with_qemu_kvm}
> +%package daemon-kvm
> +Summary: Server side daemon & driver required to run QEMU guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon = %{version}-%{release}
> +Requires: qemu-kvm
> +%endif
> +
> +%if %{with_qemu_tcg}
> +%description daemon-qemu
> +Server side daemon and driver required to manage the virtualization
> +capabilities of the QEMU TCG emulators
> +%endif
> +
> +%if %{with_qemu_kvm}
> +%description daemon-kvm
> +Server side daemon and driver required to manage the virtualization
> +capabilities of the QEMU KVM hypervisor
> +%endif
> +
> +%if %{with_qemu_tcg}
> +%package qemu
> +Summary: Server side daemon, driver & default configs required to run QEMU guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon-qemu = %{version}-%{release}
> +Requires: libvirt-configs = %{version}-%{release}
> +
> +%description qemu
> +Server side daemon, driver and default network & firewall configs
> +required to manage the virtualization capabilities of QEMU.
> +%endif
> +
> +%if %{with_qemu_kvm}
> +%package kvm
> +Summary: Server side daemon, driver & default configs required to run KVM guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon-kvm = %{version}-%{release}
> +Requires: libvirt-configs = %{version}-%{release}
> +
> +%description kvm
> +Server side daemon, driver and default network & firewall configs
> +required to manage the virtualization capabilities of KVM.
> +%endif
> +
> +
> +%if %{with_lxc}
> +%package daemon-lxc
> +Summary: Server side daemon & driver required to run LXC guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon = %{version}-%{release}
> +Requires: lxc
> +
> +%description daemon-lxc
> +Server side daemon and driver required to manage the virtualization
> +capabilities of LXC
> +
> +%package lxc
> +Summary: Server side daemon, driver & default configs required to run LXC guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon-lxc = %{version}-%{release}
> +Requires: libvirt-configs = %{version}-%{release}
> +
> +%description lxc
> +Server side daemon, driver and default network & firewall configs
> +required to manage the virtualization capabilities of LXC.
> +%endif
> +
> +
> +%if %{with_uml}
> +%package daemon-uml
> +Summary: Server side daemon & driver required to run UML guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon = %{version}-%{release}
> +# There are no UML kernel RPMs in Fedora/RHEL to depend on.
> +
> +%description daemon-uml
> +Server side daemon and driver required to manage the virtualization
> +capabilities of UML
> +
> +%package uml
> +Summary: Server side daemon, driver & default configs required to run UML guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon-uml = %{version}-%{release}
> +Requires: libvirt-configs = %{version}-%{release}
> +
> +%description uml
> +Server side daemon, driver and default network & firewall configs
> +required to manage the virtualization capabilities of UML.
> +%endif
> +
> +
> +%if %{with_xen}
> +%package daemon-xen
> +Summary: Server side daemon & driver required to run XEN guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon = %{version}-%{release}
> +Requires: xen
> +
> +%description daemon-xen
> +Server side daemon and driver required to manage the virtualization
> +capabilities of XEN
> +
> +%package xen
> +Summary: Server side daemon, driver & default configs required to run XEN guests
> +Group: Development/Libraries
> +
> +Requires: libvirt-daemon-xen = %{version}-%{release}
> +Requires: libvirt-configs = %{version}-%{release}
> +
> +%description xen
> +Server side daemon, driver and default network & firewall configs
> +required to manage the virtualization capabilities of Xen.
> +%endif
> +
> %package client
> Summary: Client side library and utilities of the libvirt library
> Group: Development/Libraries
> @@ -582,7 +767,7 @@ Group: Development/Libraries
> Requires: sanlock >= 1.8
> #for virt-sanlock-cleanup require augeas
> Requires: augeas
> -Requires: %{name} = %{version}-%{release}
> +Requires: %{name}-daemon = %{version}-%{release}
>
> %description lock-sanlock
> Includes the Sanlock lock manager plugin for the QEMU
> @@ -811,8 +996,7 @@ autoreconf -if
> %{with_packager_version} \
> --with-qemu-user=%{qemu_user} \
> --with-qemu-group=%{qemu_group} \
> - %{init_scripts} \
> - --with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid
> + %{init_scripts}
> make %{?_smp_mflags}
> gzip -9 ChangeLog
>
> @@ -884,6 +1068,8 @@ rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
> rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
> %endif
>
> +mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
> +
> %clean
> rm -fr %{buildroot}
>
> @@ -898,7 +1084,8 @@ do
> done
> make check
>
> -%pre
> +%if %{with_libvirtd}
> +%pre daemon
> %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
> # Normally 'setup' adds this in /etc/passwd, but this is
> # here for case of upgrades from earlier Fedora/RHEL. This
> @@ -910,22 +1097,9 @@ getent passwd qemu >/dev/null || \
> -c "qemu user" qemu
> %endif
>
> -%post
> +%post daemon
>
> -%if %{with_libvirtd}
> %if %{with_network}
> -# We want to install the default network for initial RPM installs
> -# or on the first upgrade from a non-network aware libvirt only.
> -# We check this by looking to see if the daemon is already installed
> -if ! /sbin/chkconfig libvirtd && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml
> -then
> - UUID=`/usr/bin/uuidgen`
> - sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
> - < %{_datadir}/libvirt/networks/default.xml \
> - > %{_sysconfdir}/libvirt/qemu/networks/default.xml
> - ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
> -fi
> -
> # All newly defined networks will have a mac address for the bridge
> # auto-generated, but networks already existing at the time of upgrade
> # will not. We need to go through all the network configs, look for
> @@ -991,8 +1165,8 @@ fi
> %endif
> %endif
>
> -%preun
> %if %{with_libvirtd}
> +%preun daemon
> %if %{with_systemd}
> if [ $1 -eq 0 ] ; then
> # Package removal, not upgrade
> @@ -1007,8 +1181,8 @@ fi
> %endif
> %endif
>
> -%postun
> %if %{with_libvirtd}
> +%postun daemon
> %if %{with_systemd}
> /bin/systemctl daemon-reload >/dev/null 2>&1 || :
> if [ $1 -ge 1 ] ; then
> @@ -1019,6 +1193,20 @@ fi
> %endif
>
> %if %{with_libvirtd}
> +%if %{with_network}
> +%post daemon-configs
> +if [ $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ] ; then
> + UUID=`/usr/bin/uuidgen`
> + sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
> + < %{_datadir}/libvirt/networks/default.xml \
> + > %{_sysconfdir}/libvirt/qemu/networks/default.xml
> + ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
> +fi
> +%endif
> +%endif
> +
> +
> +%if %{with_libvirtd}
> %if %{with_systemd}
> %triggerun -- libvirt < 0.9.4
> %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
> @@ -1064,10 +1252,19 @@ fi
> /bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
> %endif
>
> -%if %{with_libvirtd}
> %files
> %defattr(-, root, root)
>
> +%files docs
> +%defattr(-, root, root)
> +%dir %{_datadir}/doc/libvirt-docs-%{version}
> +%dir %{_datadir}/doc/libvirt-docs-%{version}/html
> +%{_datadir}/doc/libvirt-docs-%{version}/html/*
> +
> +%if %{with_libvirtd}
> +%files daemon
> +%defattr(-, root, root)
> +
> %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
> %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
>
> @@ -1078,7 +1275,6 @@ fi
> %endif
>
> %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
> -%{_sysconfdir}/libvirt/nwfilter/*.xml
>
> %{_sysconfdir}/rc.d/init.d/libvirtd
> %if %{with_systemd}
> @@ -1190,8 +1386,42 @@ rm -f $RPM_BUILD_ROOT%{_sysconfdir}/sysctl.d/libvirtd
> %{_mandir}/man8/libvirtd.8*
>
> %doc docs/*.xml
> +
> +%files daemon-configs
> +%defattr(-, root, root)
> +%{_sysconfdir}/libvirt/nwfilter/*.xml
> %endif
>
> +%files daemon-qemu
> +%defattr(-, root, root)
> +
> +%files daemon-kvm
> +%defattr(-, root, root)
> +
> +%files daemon-lxc
> +%defattr(-, root, root)
> +
> +%files daemon-uml
> +%defattr(-, root, root)
> +
> +%files daemon-xen
> +%defattr(-, root, root)
> +
> +%files qemu
> +%defattr(-, root, root)
> +
> +%files kvm
> +%defattr(-, root, root)
> +
> +%files lxc
> +%defattr(-, root, root)
> +
> +%files uml
> +%defattr(-, root, root)
> +
> +%files xen
> +%defattr(-, root, root)
> +
> %if %{with_sanlock}
> %files lock-sanlock
> %defattr(-, root, root)
> --
> 1.7.7.6
>
> --
> libvir-list mailing list
> libvir-list at redhat.com
> https://www.redhat.com/mailman/listinfo/libvir-list
More information about the libvir-list
mailing list