[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] LXC: autostart feature does set all interfaces to state up.

On 07/01/2013 03:45 PM, Richard Weinberger wrote:
> Hi!
> If you have multiple LXC containers with networking and the autostart feature enabled libvirtd fails to
> up some veth interfaces on the host side.
> Most of the time only the first veth device is in state up, all others are down.
> Reproducing is easy.
> 1. Define a few containers (5 in my case)
> 2. Run "virsh autostart ..." on each one.
> 3. stop/start libvirtd
> You'll observe that all containers are running, but "ip a" will report on the host
> side that not all veth devices are up and are not usable within the containers.
> This is not userns related, just retested with libvirt of today.

I can not reproduce this problem on my test bed...

maybe you should wait some seconds for the starting of these containers.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]