[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] LXC: autostart feature does set all interfaces to state up.



On 07/09/2013 09:11 PM, Richard Weinberger wrote:
> Am 08.07.2013 05:54, schrieb Gao feng:
>> On 07/05/2013 06:22 PM, Richard Weinberger wrote:
>>> Am 05.07.2013 03:36, schrieb Gao feng:
>>>> On 07/05/2013 04:45 AM, Richard Weinberger wrote:
>>>>> Hi,
>>>>>
>>>>> Am 03.07.2013 12:04, schrieb Gao feng:
>>>>>> Hi,
>>>>>> On 07/01/2013 03:45 PM, Richard Weinberger wrote:
>>>>>>> Hi!
>>>>>>>
>>>>>>> If you have multiple LXC containers with networking and the autostart feature enabled libvirtd fails to
>>>>>>> up some veth interfaces on the host side.
>>>>>>>
>>>>>>> Most of the time only the first veth device is in state up, all others are down.
>>>>>>>
>>>>>>> Reproducing is easy.
>>>>>>> 1. Define a few containers (5 in my case)
>>>>>>> 2. Run "virsh autostart ..." on each one.
>>>>>>> 3. stop/start libvirtd
>>>>>>>
>>>>>>> You'll observe that all containers are running, but "ip a" will report on the host
>>>>>>> side that not all veth devices are up and are not usable within the containers.
>>>>>>>
>>>>>>> This is not userns related, just retested with libvirt of today.
>>>>>>
>>>>>> I can not reproduce this problem on my test bed...
>>>>>
>>>>> Strange.
>>>>>
>>>>>> maybe you should wait some seconds for the starting of these containers.
>>>>>
>>>>> Please see the attached shell script. Using it I'm able to trigger the issue on all of
>>>>> my test machines.
>>>>> run.sh creates six very minimal containers and enables autostart. Then it kills and restarts libvirtd.
>>>>> After the script is done you'll see that only one or two veth devices are up.
>>>>>
>>>>> On the over hand, if I start them manually using a command like this one:
>>>>> for cfg in a b c d e f ; do /opt/libvirt/bin/virsh -c lxc:/// start test-$cfg ; done
>>>>> All veths are always up.
>>>>>
>>>>
>>>>
>>>> I still can not reproduce even use your script.
>>>>
>>>> [root Donkey-I5 Desktop]# ./run.sh
>>>> Domain test-a defined from container_a.conf
>>>>
>>>> Domain test-a marked as autostarted
>>>>
>>>> Domain test-b defined from container_b.conf
>>>>
>>>> Domain test-b marked as autostarted
>>>>
>>>> Domain test-c defined from container_c.conf
>>>>
>>>> Domain test-c marked as autostarted
>>>>
>>>> Domain test-d defined from container_d.conf
>>>>
>>>> Domain test-d marked as autostarted
>>>>
>>>> Domain test-e defined from container_e.conf
>>>>
>>>> Domain test-e marked as autostarted
>>>>
>>>> Domain test-f defined from container_f.conf
>>>>
>>>> Domain test-f marked as autostarted
>>>>
>>>> 2013-07-05 01:26:47.155+0000: 27163: info : libvirt version: 1.1.0
>>>> 2013-07-05 01:26:47.155+0000: 27163: debug : virLogParseOutputs:1334 : outputs=1:file:/home/gaofeng/libvirtd.log
>>>> waiting a bit....
>>>> 167: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>>> 169: veth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>>> 171: veth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>>> 173: veth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>>> 175: veth4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>>> 177: veth5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>>>
>>>>
>>>> Can you post your libvirt debug log?
>>>
>>> Please see attached file.
>>>
>>> 43: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>> 45: veth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>> 47: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
>>> 49: veth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>> 51: veth4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UP qlen 1000
>>> 53: veth5: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 100
>>>
>>
>> strange, I can not see veth related error message from your log.
>>
>> seems like all of the veth devices of host had been up but for some reasons they become down.
> 
> I think libvirt has to do "ip link set dev vethX up".
> Otherwise the device state is undefined.
> 

Yes,actually libvirt did up the veth devices, that's why only veth2& veth5 are down.

I need to know why these two devices are down, I believe they were up, your bridge and default-net
looks good. So please show me your kernel message (dmesg), maybe it can give us some useful information.

Thanks


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]