[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[libvirt] CPU models and feature probing (was Re: [Qemu-devel] [PATCH qom-cpu 00/16 v10] target-i386: convert CPU) features into properties



(CCing libvir-list again, as this is continuing a discussion about a
subject that interests libvirt developers, from another thread.)

On Thu, Feb 06, 2014 at 04:51:17PM +0100, Andreas Färber wrote:
> Am 06.02.2014 16:19, schrieb Igor Mammedov:
> > On Wed, 5 Feb 2014 17:52:16 +0100
> > Igor Mammedov <imammedo redhat com> wrote:
> > 
> >> On Wed, 05 Feb 2014 17:14:27 +0100
> >> Andreas Färber <afaerber suse de> wrote:
> >>
> >>> Am 05.02.2014 15:40, schrieb Igor Mammedov:
> >>>> On Sun, 15 Dec 2013 23:50:47 +0100
> >>>> Andreas Färber <afaerber suse de> wrote:
> >>>>
> >>>>> Am 27.11.2013 23:28, schrieb Igor Mammedov:
> >>>>>> Igor Mammedov (16):
> >>>>>>   target-i386: cleanup 'foo' feature handling'
> >>>>>>   target-i386: cleanup 'foo=val' feature handling
> >>>>>
> >>>>> Thanks, I've queued these on qom-cpu-next:
> >>>>> https://github.com/afaerber/qemu-cpu/commits/qom-cpu-next
> >>>>>
> >>>>>>   target-i386: cpu: convert 'level' to static property
> >>>>>>   target-i386: cpu: convert 'xlevel' to static property
> >>>>>>   target-i386: cpu: convert 'family' to static property
> >>>>>>   target-i386: cpu: convert 'model' to static property
> >>>>>>   target-i386: cpu: convert 'stepping' to static property
> >>>>>>   target-i386: cpu: convert 'vendor' to static property
> >>>>>>   target-i386: cpu: convert 'model-id' to static property
> >>>>>>   target-i386: cpu: convert 'tsc-frequency' to static property
> >>>>>
> >>>>> But I still don't see the utility of this conversion after all the
> >>>>> discussions we've had... :(
> >>>> It seems there is movement to make DEVICE self describing for purpose
> >>>> of QAPI schema introspection, where static properties would be used
> >>>> (dynamic ones are not suitable for this purpose)
> >>>
> >>> Do you have a pointer to such a discussion? Sounds like I was not
> >>> involved and Anthony probably not either...
> >> Not at the moment, CCing people who might know more about the topic.
> >>
> >> But just thinking about creating QAPI schema for devices, it's not really
> >> possible to generate one using dynamic properties (unless one resorts to
> >> creating every supported device instance), while arrays of static properties
> >> are there for every device and simplistically speaking just need conversion
> >> to schema format.
> > 
> > There is one more reason to use static properties for external user-settable
> > properties when it comes to device, i.e. to get list of properties user could
> > use command:
> > #qemu -device x86_64-cpu,?
> > x86_64-cpu.pmu=boolean
> > x86_64-cpu.hv-spinlocks=int
> > x86_64-cpu.hv-relaxed=boolean
> > x86_64-cpu.hv-vapic=boolean
> > x86_64-cpu.check=boolean
> > x86_64-cpu.enforce=boolean
> > 
> > which now yields only partial properties user is interested in, above
> > mentioned conversion patches make previously not available properties
> > visible to user via typical interface, perhaps eventually we could
> > drop list_cpu() interface in favor of -device foo-cpu,? command.
> 
> We already brought that up specifically for decision on a KVM call and
> Anthony's clear statement was that the expected way for management tools
> to discover properties was to instantiate the object and run qom-list on it.

As far as I remember, this was decided as the recommended way to list
the feature _default values_ (e.g. discover which features are going to
be enabled on each CPU model). Is this really the recommended way to
discover which properties can be set on device_add, too? We are not
going to have any other instrospection mechanism that won't require
objects to be created?

> 
> It is a known issue, both for info qtree and -device, that they do not
> list all properties. But I don't want to repeat this discussion over and
> over again: Paolo's patches for static properties were rejected by
> Anthony, therefore I could not queue them on qom-next back then and
> therefore I had to code my properties for the X86CPU (which was not yet
> a device back then) the new QOM way, and now you're trying to override
> Anthony's decision in forcing me to accept patches that Anthony had
> vetoed against!
> 
> If you or libvirt need all properties for -device, then send a patch. No
> one did for two years, so apparently no one cared.
> 
> Static properties are considered a valid, convenient way to define
> properties for a device but not the sole one for a device or object.
> Using info qtree or -device as justification for implementation
> decisions is backwards and wrong since those are considered legacy.

So, let me ask again, explicitly: we are not going to ever have a
QMP-based interface that will allow all available device_add options to
be queried without instantiating an object first? This really surprises
me.

(That's not a question just for Andreas. I would like to hear from
Paolo, Anthony, and others.)


> 
> And specifically for libvirt Eduardo pushed into a release properties
> that could be used to inspect CPUIDs. If that's not being used by
> libvirt, as Eduardo seems to imply now, why did we put work in that in
> the first place?

It is not being used by libvirt because the current interface is
unusable without running QEMU once for each CPU model. With the CPU
model subclasses, we will be able to make it possible to create/destroy
CPUs of different models in a single QEMU instance, and then libvirt
will be able to use it.

> 
> If there's no relation between a CPU model named, e.g., "Haswell" and
> the one on an Intel Haswell chip any more, then we should give them
> artificial names like "qemu64"; I strongly believe that Haswell
> definition in code should match that of the specs/hardware and if TCG
> can't emulate something that's one thing (subtractive: no AVX) and if
> KVM wants to speed up things that's another (additive: kvmvapic,
> in-kernel IRQ/PIT). What I am arguing against is watering the meaning of
> our definitions from "this is this model" to "this is handy". In
> particular, if we use the post_initialize hook like I suggested then
> -global is still able to override it and Eduardo's properties should
> correctly report them to libvirt.

"Haswell" is named this way not only because it looks like Haswell, but
also because it has useful features you are going to find only on
Haswell, and you (probably) are not going to be able to run it on hosts
older than Haswell. That's the main real-world application of CPU
models: making sure the VMs can run on a specific subset of hosts. So,
if you choose "Haswell", you are telling the management stack "I know
this is going to run only on Haswell and newer CPUs".

That's why x2apic is being proposed as an exception: it can be enabled
on any host, because it doesn't depend on host-side support. That's why
I propose we enable it on CPU models that don't have x2apic in the real
world.

(BTW, what is the relation between this subject and static properties? I
was expecting this to be discussed in the other existing thread about
x2apic)

> 
> > Taking in account Paolo's cleanup of legacy properties in static properties,
> > it might make them more suitable for moving concept to Object level.
> > (As far as I remember, Anthony objected to it due to existence of legacy
> > properties).
> 
> That'll be for Anthony to answer, but static properties at Object level
> would still not expose child<> and especially not link<> properties to
> the user.
> 
> Andreas
> 
> -- 
> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg

-- 
Eduardo


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]