[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt] libvirt default network

Hi again

answering my own post, I think I figured it out, as a missing dependency between
. libvirt-daemon-driver-network that provides 
. and libvirt-daemon-config-network, shose post-install script actually uses this same file

So this means that libvirt-daemon-config-network should depend on libvirt-daemon-driver-network so that the latter gets installed first
and it seems like on our earlier setups this was working by accident

I’ll need to test this more thoroughly though — Thierry

On 11 Feb 2014, at 09:28, Thierry Parmentelat <thierry parmentelat inria fr> wrote:

> Hi
> This is in echo to a message originally sent on libvirt-users, but having not received any answer yet so we figured we would try this list instead
> So, we use libvirt on various flavours of fedora; with fedora18 we were using libvirt-1.0.4, that we rebuilt using a slightly modified version of mainstream specfile
> Under fedora20 we’ve first tried using the libvirt version that comes with vanilla fedora - 1.1.3 - but are seeing glitches that apparently are fixed in 1.2.1, so we’re giving this a shot
> The problem we have is, right after installation of our libvirt rpm, the ‘default’ network is not known to the system:
> [root vnode07 ~]# virsh -c lxc:// net-dumpxml default
> error: failed to get network 'default'
> error: Network not found: no network with matching name ‘default'
> While the ‘source’ file for this default network did ship with the rpm
> [root vnode07 ~]# rpm -qf /usr/share/libvirt/networks/default.xml
> libvirt-daemon-driver-network-1.2.1-0.x86_64
> ------------
> What we used to have with 1.0.4 and 1.1.3 at that same point (right after yum install) is
> [root vnode05 ~]# virsh -c lxc:// net-dumpxml default
> <network connections='1510’>
> ..
> </network>
> —
> So, I’m confident we can tweak our specfile to get this to work by adding something like net-define / net-autostart / net-start somewhere near the post install script of the daemon package or something
> However we would appreciate some insight as to how this would happen in the first place; is this an intentional change on your end ? 
> or did we screw that up somehow ? if so, I could not find out precisely how this network definition is supposed to take place when the package gets installed, any hint / insight on that would be much appreciated
> Thanks in advance 

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]