[libvirt] [PATCH 1/2] qemu: Don't fail if the SCSI host device is shareable between domains
Osier Yang
jyang at redhat.com
Wed Jan 29 17:22:42 UTC 2014
It doesn't make sense to fail if the SCSI host device is specified
as "shareable" explicitly between domains (NB, it works if and only
if the device is specified as "shareable" for *all* domains,
otherwise it fails).
To fix the problem, this patch introduces an array for virSCSIDevice
struct, which records all the names of domain which are using the
device (note that the recorded domains must specifiy the device as
shareable). And the change on the data struct brings on many
subsequent changes in the code.
Since prior to this patch, the "shareable" tag didn't work as expected,
it actually work like "non-shareable". If there was a live domain using
the SCSI device with "shareable" specified, then after upgrading
(assuming the live domain keep running during upgrading) the older
libvirt (without this patch) to newer libvirt (with this patch), it may
cause some confusion when user tries to start later domains as
"shareable". So this patch also added notes in formatdomain.html to
declare the fact.
* src/util/virscsi.h:
- Remove virSCSIDeviceGetUsedBy
- Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel
- Add virSCSIDeviceIsAvailable
* src/util/virscsi.c:
- struct virSCSIDevice: Change "used_by" to be an array; Add
"n_used_by" as the array count
- virSCSIDeviceGetUsedBy: Removed
- virSCSIDeviceFree: frees the "used_by" array
- virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential
memory corruption
- virSCSIDeviceIsAvailable: New
- virSCSIDeviceListDel: Change the logic, for device which is already
in the list, just remove the corresponding entry in "used_by". And
since it's only used in one place, we can safely removing the code
to find out the dev in the list first.
- Copyright updating
* src/libvirt_private.sys:
- virSCSIDeviceGetUsedBy: Remove
- virSCSIDeviceIsAvailable: New
* src/qemu/qemu_hostdev.c:
- qemuUpdateActiveScsiHostdevs: Check if the device existing before
adding it to the list;
- qemuPrepareHostdevSCSIDevices: Error out if the not all domains
use the device as "shareable"; Also don't try to add the device
to the activeScsiHostdevs list if it already there; And make
more sensible error w.r.t the current "shareable" value in
driver->activeScsiHostdevs.
- qemuDomainReAttachHostScsiDevices: Change the logic according
to the changes on helpers.
Signed-off-by: Osier Yang <jyang at redhat.com>
---
docs/formatdomain.html.in | 5 +++
src/libvirt_private.syms | 2 +-
src/qemu/qemu_hostdev.c | 77 ++++++++++++++++++++++++++---------------------
src/util/virscsi.c | 44 +++++++++++++++++++++------
src/util/virscsi.h | 7 +++--
5 files changed, 88 insertions(+), 47 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index ff50214..20b3f5a 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -2798,6 +2798,11 @@
between domains (assuming the hypervisor and OS support this).
Only supported by SCSI host device.
<span class="since">Since 1.0.6</span>
+ <p>
+ Note: Although <code>shareable</code> was introduced
+ <span class="since">in 1.0.6</span>, but it did not work as
+ as expected until <span class="since">1.2.2</span>.
+ </p>
</dd>
</dl>
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index 0c16343..4dbba17 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -1687,7 +1687,7 @@ virSCSIDeviceGetSgName;
virSCSIDeviceGetShareable;
virSCSIDeviceGetTarget;
virSCSIDeviceGetUnit;
-virSCSIDeviceGetUsedBy;
+virSCSIDeviceIsAvailable;
virSCSIDeviceListAdd;
virSCSIDeviceListCount;
virSCSIDeviceListDel;
diff --git a/src/qemu/qemu_hostdev.c b/src/qemu/qemu_hostdev.c
index 86a463a..2b9d274 100644
--- a/src/qemu/qemu_hostdev.c
+++ b/src/qemu/qemu_hostdev.c
@@ -250,13 +250,14 @@ qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver,
virDomainHostdevDefPtr hostdev = NULL;
size_t i;
int ret = -1;
+ virSCSIDevicePtr scsi = NULL;
+ virSCSIDevicePtr tmp = NULL;
if (!def->nhostdevs)
return 0;
virObjectLock(driver->activeScsiHostdevs);
for (i = 0; i < def->nhostdevs; i++) {
- virSCSIDevicePtr scsi = NULL;
hostdev = def->hostdevs[i];
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS ||
@@ -271,11 +272,18 @@ qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver,
hostdev->shareable)))
goto cleanup;
- virSCSIDeviceSetUsedBy(scsi, def->name);
-
- if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) {
+ if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
+ if (virSCSIDeviceSetUsedBy(tmp, def->name) < 0) {
+ virSCSIDeviceFree(scsi);
+ goto cleanup;
+ }
virSCSIDeviceFree(scsi);
- goto cleanup;
+ } else {
+ if (virSCSIDeviceSetUsedBy(scsi, def->name) < 0 ||
+ virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) {
+ virSCSIDeviceFree(scsi);
+ goto cleanup;
+ }
}
}
ret = 0;
@@ -1118,24 +1126,29 @@ qemuPrepareHostdevSCSIDevices(virQEMUDriverPtr driver,
for (i = 0; i < count; i++) {
virSCSIDevicePtr scsi = virSCSIDeviceListGet(list, i);
if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
- const char *other_name = virSCSIDeviceGetUsedBy(tmp);
+ bool scsi_shareable = virSCSIDeviceGetShareable(scsi);
+ bool tmp_shareable = virSCSIDeviceGetShareable(tmp);
- if (other_name)
- virReportError(VIR_ERR_OPERATION_INVALID,
- _("SCSI device %s is in use by domain %s"),
- virSCSIDeviceGetName(tmp), other_name);
- else
+ if (!(scsi_shareable && tmp_shareable)) {
virReportError(VIR_ERR_OPERATION_INVALID,
- _("SCSI device %s is already in use"),
+ _("SCSI device %s is already in use by "
+ "other domain(s) as '%s'"),
+ tmp_shareable ? "shareable" : "non-shareable",
virSCSIDeviceGetName(tmp));
- goto error;
- }
+ goto error;
+ }
- virSCSIDeviceSetUsedBy(scsi, name);
- VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi));
+ if (virSCSIDeviceSetUsedBy(tmp, name) < 0)
+ goto error;
+ } else {
+ if (virSCSIDeviceSetUsedBy(scsi, name) < 0)
+ goto error;
- if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0)
- goto error;
+ VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi));
+
+ if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0)
+ goto error;
+ }
}
virObjectUnlock(driver->activeScsiHostdevs);
@@ -1380,8 +1393,8 @@ qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver,
virObjectLock(driver->activeScsiHostdevs);
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
- virSCSIDevicePtr scsi, tmp;
- const char *used_by = NULL;
+ virSCSIDevicePtr scsi;
+ virSCSIDevicePtr tmp;
virDomainDeviceDef dev;
dev.type = VIR_DOMAIN_DEVICE_HOSTDEV;
@@ -1411,30 +1424,26 @@ qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver,
/* Only delete the devices which are marked as being used by @name,
* because qemuProcessStart could fail on the half way. */
- tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi);
- virSCSIDeviceFree(scsi);
-
- if (!tmp) {
+ if (!(tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
VIR_WARN("Unable to find device %s:%d:%d:%d "
"in list of active SCSI devices",
hostdev->source.subsys.u.scsi.adapter,
hostdev->source.subsys.u.scsi.bus,
hostdev->source.subsys.u.scsi.target,
hostdev->source.subsys.u.scsi.unit);
+ virSCSIDeviceFree(scsi);
continue;
}
- used_by = virSCSIDeviceGetUsedBy(tmp);
- if (STREQ_NULLABLE(used_by, name)) {
- VIR_DEBUG("Removing %s:%d:%d:%d dom=%s from activeScsiHostdevs",
- hostdev->source.subsys.u.scsi.adapter,
- hostdev->source.subsys.u.scsi.bus,
- hostdev->source.subsys.u.scsi.target,
- hostdev->source.subsys.u.scsi.unit,
- name);
+ VIR_DEBUG("Removing %s:%d:%d:%d dom=%s from activeScsiHostdevs",
+ hostdev->source.subsys.u.scsi.adapter,
+ hostdev->source.subsys.u.scsi.bus,
+ hostdev->source.subsys.u.scsi.target,
+ hostdev->source.subsys.u.scsi.unit,
+ name);
- virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp);
- }
+ virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp, name);
+ virSCSIDeviceFree(scsi);
}
virObjectUnlock(driver->activeScsiHostdevs);
}
diff --git a/src/util/virscsi.c b/src/util/virscsi.c
index 58d9e25..b150299 100644
--- a/src/util/virscsi.c
+++ b/src/util/virscsi.c
@@ -1,6 +1,7 @@
/*
* virscsi.c: helper APIs for managing host SCSI devices
*
+ * Copyright (C) 2013 - 2014 Red Hat, Inc.
* Copyright (C) 2013 Fujitsu, Inc.
*
* This library is free software; you can redistribute it and/or
@@ -55,7 +56,8 @@ struct _virSCSIDevice {
char *name; /* adapter:bus:target:unit */
char *id; /* model:vendor */
char *sg_path; /* e.g. /dev/sg2 */
- const char *used_by; /* name of the domain using this dev */
+ char **used_by; /* name of the domains using this dev */
+ size_t n_used_by; /* how many domains are using this dev */
bool readonly;
bool shareable;
@@ -256,26 +258,37 @@ cleanup:
void
virSCSIDeviceFree(virSCSIDevicePtr dev)
{
+ size_t i;
+
if (!dev)
return;
VIR_FREE(dev->id);
VIR_FREE(dev->name);
VIR_FREE(dev->sg_path);
+ for (i = 0; i < dev->n_used_by; i++) {
+ VIR_FREE(dev->used_by[i]);
+ }
+ VIR_FREE(dev->used_by);
VIR_FREE(dev);
}
-void
+int
virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev,
const char *name)
{
- dev->used_by = name;
+ char *copy = NULL;
+
+ if (VIR_STRDUP(copy, name) < 0)
+ return -1;
+
+ return VIR_APPEND_ELEMENT(dev->used_by, dev->n_used_by, copy);
}
-const char *
-virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev)
+bool
+virSCSIDeviceIsAvailable(virSCSIDevicePtr dev)
{
- return dev->used_by;
+ return dev->n_used_by == 0;
}
const char *
@@ -406,10 +419,23 @@ virSCSIDeviceListSteal(virSCSIDeviceListPtr list,
void
virSCSIDeviceListDel(virSCSIDeviceListPtr list,
- virSCSIDevicePtr dev)
+ virSCSIDevicePtr dev,
+ const char *name)
{
- virSCSIDevicePtr ret = virSCSIDeviceListSteal(list, dev);
- virSCSIDeviceFree(ret);
+ virSCSIDevicePtr tmp = NULL;
+ size_t i;
+
+ for (i = 0; i < dev->n_used_by; i++) {
+ if (STREQ_NULLABLE(dev->used_by[i], name)) {
+ if (dev->n_used_by > 1) {
+ VIR_DELETE_ELEMENT(dev->used_by, i, dev->n_used_by);
+ } else {
+ tmp = virSCSIDeviceListSteal(list, dev);
+ virSCSIDeviceFree(tmp);
+ }
+ break;
+ }
+ }
}
virSCSIDevicePtr
diff --git a/src/util/virscsi.h b/src/util/virscsi.h
index b2e98ca..aff7e5a 100644
--- a/src/util/virscsi.h
+++ b/src/util/virscsi.h
@@ -50,8 +50,8 @@ virSCSIDevicePtr virSCSIDeviceNew(const char *adapter,
bool shareable);
void virSCSIDeviceFree(virSCSIDevicePtr dev);
-void virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, const char *name);
-const char *virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev);
+int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, const char *name);
+bool virSCSIDeviceIsAvailable(virSCSIDevicePtr dev);
const char *virSCSIDeviceGetName(virSCSIDevicePtr dev);
unsigned int virSCSIDeviceGetAdapter(virSCSIDevicePtr dev);
unsigned int virSCSIDeviceGetBus(virSCSIDevicePtr dev);
@@ -83,7 +83,8 @@ size_t virSCSIDeviceListCount(virSCSIDeviceListPtr list);
virSCSIDevicePtr virSCSIDeviceListSteal(virSCSIDeviceListPtr list,
virSCSIDevicePtr dev);
void virSCSIDeviceListDel(virSCSIDeviceListPtr list,
- virSCSIDevicePtr dev);
+ virSCSIDevicePtr dev,
+ const char *name);
virSCSIDevicePtr virSCSIDeviceListFind(virSCSIDeviceListPtr list,
virSCSIDevicePtr dev);
--
1.8.1.4
More information about the libvir-list
mailing list