[libvirt] [PATCH v2 01/17] qemu: mandate QEMU version 0.12.0 or newer
Daniel P. Berrange
berrange at redhat.com
Mon Nov 9 16:24:23 UTC 2015
Check the QEMU version and refuse to work with QEMU versions
older than 0.12.0. This is approximately the vintage of QEMU
that is available in RHEL-6 era distros.
Signed-off-by: Daniel P. Berrange <berrange at redhat.com>
---
src/qemu/qemu_capabilities.c | 7 ++
tests/qemuhelpdata/kvm-74 | 111 ---------------------
tests/qemuhelpdata/kvm-83-rhel56 | 141 --------------------------
tests/qemuhelpdata/kvm-86 | 170 -------------------------------
tests/qemuhelpdata/qemu-0.10.5 | 141 --------------------------
tests/qemuhelpdata/qemu-0.9.1 | 102 -------------------
tests/qemuhelpdata/qemu-kvm-0.10.5 | 155 -----------------------------
tests/qemuhelpdata/qemu-kvm-0.11.0-rc2 | 177 ---------------------------------
tests/qemuhelptest.c | 163 ------------------------------
9 files changed, 7 insertions(+), 1160 deletions(-)
delete mode 100644 tests/qemuhelpdata/kvm-74
delete mode 100644 tests/qemuhelpdata/kvm-83-rhel56
delete mode 100644 tests/qemuhelpdata/kvm-86
delete mode 100644 tests/qemuhelpdata/qemu-0.10.5
delete mode 100644 tests/qemuhelpdata/qemu-0.9.1
delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.10.5
delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.11.0-rc2
diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c
index 7bc7e92..c888547 100644
--- a/src/qemu/qemu_capabilities.c
+++ b/src/qemu/qemu_capabilities.c
@@ -1458,6 +1458,13 @@ int virQEMUCapsParseHelpStr(const char *qemu,
*version = (major * 1000 * 1000) + (minor * 1000) + micro;
+ if (*version < 12000) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("QEMU version >= 0.12.00 is required, but %d.%d.%d found"),
+ major, minor, micro);
+ goto cleanup;
+ }
+
/* Refuse to parse -help output for QEMU releases >= 1.2.0 that should be
* using QMP probing.
*/
diff --git a/tests/qemuhelpdata/kvm-74 b/tests/qemuhelpdata/kvm-74
deleted file mode 100644
index f44932d..0000000
--- a/tests/qemuhelpdata/kvm-74
+++ /dev/null
@@ -1,111 +0,0 @@
-QEMU PC emulator version 0.9.1 (kvm-74), Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=on|off][,format=f][,boot=on|off]
- use 'file' as a drive image
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [a|c|d|n] boot on floppy (a), hard disk (c), CD-ROM (d), or network (n)
--snapshot write to temporary files instead of disk image files
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--no-fd-bootchk disable boot signature checking for floppy disks
--m megs set virtual RAM size to megs MB [default=128]
--smp n set the number of CPUs to 'n' [default=1]
--nographic disable graphical output and redirect serial I/Os to console
--portrait rotate graphical output 90 deg left (only PXA LCD)
--k language use keyboard layout (for example "fr" for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--localtime set the real time clock to local time [default=utc]
--full-screen start in full screen
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--name string set the name of the guest
-
-Network options:
--net nic[,vlan=n][,macaddr=addr][,model=type]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,hostname=host]
- connect the user mode network stack to VLAN 'n' and send
- hostname 'host' to DHCP clients
--net tap[,vlan=n][,fd=h][,ifname=name][,script=file][,downscript=dfile]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown);
- use '[down]script=no' to disable script execution;
- use 'fd=h' to connect to an already opened TAP interface
--net socket[,vlan=n][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net none use it alone to have zero network devices; if no -net option
- is provided, the default is '-net nic -net user'
-
--tftp dir allow tftp access to files in dir [-net user]
--bootp file advertise file in BOOTP replies
--smb dir allow SMB access to files in 'dir' [-net user]
--redir [tcp|udp]:host-port:[guest-host]:guest-port
- redirect TCP or UDP connections from host to guest [-net user]
-
-Linux boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--monitor dev redirect the monitor to char device 'dev'
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--pidfile file Write PID to 'file'
--S freeze CPU at startup (use 'c' to start execution)
--s wait gdb connection to port
--p port set gdb connection port [default=1234]
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t] force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--no-kvm disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit disable KVM kernel mode PIT
--std-vga simulate a standard VGA card with VESA Bochs Extensions
- (default is CL-GD5446 PCI VGA)
--no-acpi disable ACPI
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id] start right away with a saved state (loadvm in monitor)
--vnc display start a VNC server on display
--daemonize daemonize QEMU after initializing
--tdf inject timer interrupts that got lost
--kvm-shadow-memory megs set the amount of shadow pages to be allocated
--mem-path set the path to hugetlbfs/tmpfs mounted directory, also enables allocation of guest memory with huge pages
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--startdate select initial date of the clock
--icount [N|auto]
- Enable virtual instruction counter with 2^N clock ticks per instruction
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/kvm-83-rhel56 b/tests/qemuhelpdata/kvm-83-rhel56
deleted file mode 100644
index b2cefa9..0000000
--- a/tests/qemuhelpdata/kvm-83-rhel56
+++ /dev/null
@@ -1,141 +0,0 @@
-QEMU PC emulator version 0.9.1 (kvm-83-maint-snapshot-20090205), Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none|unsafe][,format=f][,serial=s]
- [,boot=on|off][,readonly=on|off]
- use 'file' as a drive image
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [a|c|d|n] boot on floppy (a), hard disk (c), CD-ROM (d), or network (n)
--snapshot write to temporary files instead of disk image files
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--no-fd-bootchk disable boot signature checking for floppy disks
--m megs set virtual RAM size to megs MB [default=128]
--smp n set the number of CPUs to 'n' [default=1]
--nographic disable graphical output and redirect serial I/Os to console
--portrait rotate graphical output 90 deg left (only PXA LCD)
--k language use keyboard layout (for example "fr" for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--vga [std|cirrus]
- select video card type
--localtime set the real time clock to local time [default=utc]
--full-screen start in full screen
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--rtc-td-hack use it to fix time drift in Windows ACPI HAL
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--name string set the name of the guest
--uuid %08x-%04x-%04x-%04x-%012x specify machine UUID
--notify event enable async-notifications for event
--qxl <num>[,ram=megs]
- use 'num' qxl display devices, each with RAM size of 'megs' MB
- [default=64]
--spice <args> use spice
--spice-help show spice usage
-
-Network options:
--net nic[,vlan=n][,macaddr=addr][,model=type][,name=str]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,hostname=host]
- connect the user mode network stack to VLAN 'n' and send
- hostname 'host' to DHCP clients
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown);
- use '[down]script=no' to disable script execution;
- use 'fd=h' to connect to an already opened TAP interface
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net none use it alone to have zero network devices; if no -net option
- is provided, the default is '-net nic -net user'
-
--tftp dir allow tftp access to files in dir [-net user]
--bootp file advertise file in BOOTP replies
--redir [tcp|udp]:host-port:[guest-host]:guest-port
- redirect TCP or UDP connections from host to guest [-net user]
-
-Linux boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--monitor dev redirect the monitor to char device 'dev'
--vmchannel di:DI,dev redirect the hypercall device with device id DI, to char device 'dev'
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--pidfile file Write PID to 'file'
--S freeze CPU at startup (use 'c' to start execution)
--s wait gdb connection to port
--p port set gdb connection port [default=1234]
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t] force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--no-kvm disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit disable KVM kernel mode PIT
--no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection
--pcidevice host=bus:dev.func[,dma=none][,name=string]
- expose a PCI device to the guest OS.
- dma=none: don't perform any dma translations (default is to use an iommu)
- 'string' is used in log output.
--no-acpi disable ACPI
--no-hpet disable HPET
--balloon none disable balloon device
--balloon virtio
- enable virtio balloon device (default)
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
- ACPI table description
--smbios file=binary
- Load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- Specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- Specify SMBIOS type 1 fields
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id] start right away with a saved state (loadvm in monitor)
--vnc display start a VNC server on display
--daemonize daemonize QEMU after initializing
--tdf inject timer interrupts that got lost
--kvm-shadow-memory megs set the amount of shadow pages to be allocated
--mem-path set the path to hugetlbfs/tmpfs mounted directory, also
- enables allocation of guest memory with huge pages
--mem-prealloc toggles preallocation of -mem-path backed physical memory
- at startup. Default is enabled.
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--startdate select initial date of the clock
--icount [N|auto]
- Enable virtual instruction counter with 2^N clock ticks per instruction
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/kvm-86 b/tests/qemuhelpdata/kvm-86
deleted file mode 100644
index 1687cab..0000000
--- a/tests/qemuhelpdata/kvm-86
+++ /dev/null
@@ -1,170 +0,0 @@
-QEMU PC emulator version 0.10.50 (qemu-kvm-devel-86), Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--version display version information and exit
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--smp n set the number of CPUs to 'n' [default=1]
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none][,format=f][,serial=s]
- [,boot=on|off]
- use 'file' as a drive image
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [a|c|d|n] boot on floppy (a), hard disk (c), CD-ROM (d), or network (n)
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--k language use keyboard layout (for example 'fr' for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--name string set the name of the guest
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--nographic disable graphical output and redirect serial I/Os to console
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--portrait rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|xenfb|none]
- select video card type
--full-screen start in full screen
--vnc display start a VNC server on display
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--rtc-td-hack use it to fix time drift in Windows ACPI HAL
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
- ACPI table description
--smbios file=binary
- Load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- Specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- Specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=addr][,model=type][,name=str]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,hostname=host]
- connect the user mode network stack to VLAN 'n' and send
- hostname 'host' to DHCP clients
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown);
- use '[down]script=no' to disable script execution;
- use 'fd=h' to connect to an already opened TAP interface
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net dump[,vlan=n][,file=f][,len=n]
- dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none use it alone to have zero network devices; if no -net option
- is provided, the default is '-net nic -net user'
--tftp dir allow tftp access to files in dir [-net user]
--bootp file advertise file in BOOTP replies
--smb dir allow SMB access to files in 'dir' [-net user]
--redir [tcp|udp]:host-port:[guest-host]:guest-port
- redirect TCP or UDP connections from host to guest [-net user]
-
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--pidfile file write PID to 'file'
--singlestep always run in singlestep mode
--S freeze CPU at startup (use 'c' to start execution)
--gdb dev wait for gdb connection on 'dev'
--s shorthand for -gdb tcp::1234
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--localtime set the real time clock to local time [default=utc]
--startdate select initial date of the clock
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per
- instruction
--watchdog i6300esb|ib700
- enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
- action when watchdog fires [default=reset]
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--chroot dir Chroot to dir just before starting the VM.
--runas user Change to user id user just before starting the VM.
--no-kvm disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit disable KVM kernel mode PIT
--no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection
--pcidevice host=bus:dev.func[,dma=none][,name=string]
- expose a PCI device to the guest OS.
- dma=none: don't perform any dma translations (default is to use an iommu)
- 'string' is used in log output.
--enable-nesting enable support for running a VM inside the VM (AMD only)
--nvram FILE provide ia64 nvram contents
--tdf enable guest time drift compensation
--kvm-shadow-memory MEGABYTES
- allocate MEGABYTES for kvm mmu shadowing
--mempath FILE provide backing storage for guest RAM
--mem-prealloc preallocate guest memory (use with -mempath)
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-0.10.5 b/tests/qemuhelpdata/qemu-0.10.5
deleted file mode 100644
index 2a8363b..0000000
--- a/tests/qemuhelpdata/qemu-0.10.5
+++ /dev/null
@@ -1,141 +0,0 @@
-QEMU PC emulator version 0.10.5, Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--smp n set the number of CPUs to 'n' [default=1]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none][,format=f][,serial=s]
- use 'file' as a drive image
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [a|c|d|n] boot on floppy (a), hard disk (c), CD-ROM (d), or network (n)
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--k language use keyboard layout (for example "fr" for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--name string set the name of the guest
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--nographic disable graphical output and redirect serial I/Os to console
--curses use a curses/ncurses interface instead of SDL
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--portrait rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|none]
- select video card type
--full-screen start in full screen
--vnc display start a VNC server on display
-
-Network options:
--net nic[,vlan=n][,macaddr=addr][,model=type][,name=str]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,hostname=host]
- connect the user mode network stack to VLAN 'n' and send
- hostname 'host' to DHCP clients
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown);
- use '[down]script=no' to disable script execution;
- use 'fd=h' to connect to an already opened TAP interface
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net none use it alone to have zero network devices; if no -net option
- is provided, the default is '-net nic -net user'
--tftp dir allow tftp access to files in dir [-net user]
--bootp file advertise file in BOOTP replies
--smb dir allow SMB access to files in 'dir' [-net user]
--redir [tcp|udp]:host-port:[guest-host]:guest-port
- redirect TCP or UDP connections from host to guest [-net user]
-
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--rtc-td-hack use it to fix time drift in Windows ACPI HAL
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
- ACPI table description
-Linux boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--pidfile file write PID to 'file'
--S freeze CPU at startup (use 'c' to start execution)
--s wait gdb connection to port
--p port set gdb connection port [default=1234]
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--kernel-kqemu enable KQEMU full virtualization (default is user mode only)
--no-kqemu disable KQEMU kernel module usage
--enable-kvm enable KVM full virtualization support
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--localtime set the real time clock to local time [default=utc]
--startdate select initial date of the clock
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per instruction
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--chroot dir Chroot to dir just before starting the VM.
--runas user Change to user id user just before starting the VM.
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-0.9.1 b/tests/qemuhelpdata/qemu-0.9.1
deleted file mode 100644
index 0eaeaec..0000000
--- a/tests/qemuhelpdata/qemu-0.9.1
+++ /dev/null
@@ -1,102 +0,0 @@
-QEMU PC emulator version 0.9.1, Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][snapshot=on|off] [,cache=on|off]
- use 'file' as a drive image
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [a|c|d|n] boot on floppy (a), hard disk (c), CD-ROM (d), or network (n)
--snapshot write to temporary files instead of disk image files
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--no-fd-bootchk disable boot signature checking for floppy disks
--m megs set virtual RAM size to megs MB [default=128]
--smp n set the number of CPUs to 'n' [default=1]
--nographic disable graphical output and redirect serial I/Os to console
--portrait rotate graphical output 90 deg left (only PXA LCD)
--k language use keyboard layout (for example "fr" for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--localtime set the real time clock to local time [default=utc]
--full-screen start in full screen
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--name string set the name of the guest
-
-Network options:
--net nic[,vlan=n][,macaddr=addr][,model=type]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,hostname=host]
- connect the user mode network stack to VLAN 'n' and send
- hostname 'host' to DHCP clients
--net tap[,vlan=n][,fd=h][,ifname=name][,script=file][,downscript=dfile]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown);
- use '[down]script=no' to disable script execution;
- use 'fd=h' to connect to an already opened TAP interface
--net socket[,vlan=n][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net none use it alone to have zero network devices; if no -net option
- is provided, the default is '-net nic -net user'
-
--tftp dir allow tftp access to files in dir [-net user]
--bootp file advertise file in BOOTP replies
--smb dir allow SMB access to files in 'dir' [-net user]
--redir [tcp|udp]:host-port:[guest-host]:guest-port
- redirect TCP or UDP connections from host to guest [-net user]
-
-Linux boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--monitor dev redirect the monitor to char device 'dev'
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--pidfile file Write PID to 'file'
--S freeze CPU at startup (use 'c' to start execution)
--s wait gdb connection to port
--p port set gdb connection port [default=1234]
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t] force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--kernel-kqemu enable KQEMU full virtualization (default is user mode only)
--no-kqemu disable KQEMU kernel module usage
--std-vga simulate a standard VGA card with VESA Bochs Extensions
- (default is CL-GD5446 PCI VGA)
--no-acpi disable ACPI
--no-reboot exit instead of rebooting
--loadvm file start right away with a saved state (loadvm in monitor)
--vnc display start a VNC server on display
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock help
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-kvm-0.10.5 b/tests/qemuhelpdata/qemu-kvm-0.10.5
deleted file mode 100644
index 29d6f83..0000000
--- a/tests/qemuhelpdata/qemu-kvm-0.10.5
+++ /dev/null
@@ -1,155 +0,0 @@
-QEMU PC emulator version 0.10.5 (qemu-kvm-0.10.5), Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--smp n set the number of CPUs to 'n' [default=1]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none][,format=f][,serial=s]
- [,boot=on|off]
- use 'file' as a drive image
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [a|c|d|n] boot on floppy (a), hard disk (c), CD-ROM (d), or network (n)
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--k language use keyboard layout (for example "fr" for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--name string set the name of the guest
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--nographic disable graphical output and redirect serial I/Os to console
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--portrait rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|none]
- select video card type
--full-screen start in full screen
--vnc display start a VNC server on display
--name string set the name of the guest
--uuid %08x-%04x-%04x-%04x-%012x specify machine UUID
-
-Network options:
--net nic[,vlan=n][,macaddr=addr][,model=type][,name=str]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,hostname=host]
- connect the user mode network stack to VLAN 'n' and send
- hostname 'host' to DHCP clients
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown);
- use '[down]script=no' to disable script execution;
- use 'fd=h' to connect to an already opened TAP interface
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net none use it alone to have zero network devices; if no -net option
- is provided, the default is '-net nic -net user'
--tftp dir allow tftp access to files in dir [-net user]
--bootp file advertise file in BOOTP replies
--smb dir allow SMB access to files in 'dir' [-net user]
--redir [tcp|udp]:host-port:[guest-host]:guest-port
- redirect TCP or UDP connections from host to guest [-net user]
-
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--rtc-td-hack use it to fix time drift in Windows ACPI HAL
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
- ACPI table description
-Linux boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--pidfile file write PID to 'file'
--S freeze CPU at startup (use 'c' to start execution)
--s wait gdb connection to port
--p port set gdb connection port [default=1234]
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--no-kvm disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit disable KVM kernel mode PIT
--no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection
--enable-nesting enable support for running a VM inside the VM (AMD only)
--pcidevice host=bus:dev.func[,dma=none][,name=string]
- expose a PCI device to the guest OS.
- dma=none: don't perform any dma translations (default is to use an iommu)
- 'string' is used in log output.
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--tdf inject timer interrupts that got lost
--kvm-shadow-memory megs set the amount of shadow pages to be allocated
--mem-path set the path to hugetlbfs/tmpfs mounted directory, also
- enables allocation of guest memory with huge pages
--mem-prealloc toggles preallocation of -mem-path backed physical memory
- at startup. Default is enabled.
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--localtime set the real time clock to local time [default=utc]
--startdate select initial date of the clock
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per instruction
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--chroot dir Chroot to dir just before starting the VM.
--runas user Change to user id user just before starting the VM.
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-kvm-0.11.0-rc2 b/tests/qemuhelpdata/qemu-kvm-0.11.0-rc2
deleted file mode 100644
index 0eb0b76..0000000
--- a/tests/qemuhelpdata/qemu-kvm-0.11.0-rc2
+++ /dev/null
@@ -1,177 +0,0 @@
-QEMU PC emulator version 0.10.92 (qemu-kvm-0.11.0-rc2), Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--version display version information and exit
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--smp n set the number of CPUs to 'n' [default=1]
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none][,format=f][,serial=s]
- [,addr=A]
- [,boot=on|off]
- use 'file' as a drive image
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
- 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--k language use keyboard layout (for example 'fr' for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--name string1[,process=string2] set the name of the guest
- string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--nographic disable graphical output and redirect serial I/Os to console
--curses use a curses/ncurses interface instead of SDL
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--portrait rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|xenfb|none]
- select video card type
--full-screen start in full screen
--vnc display start a VNC server on display
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--rtc-td-hack use it to fix time drift in Windows ACPI HAL
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--balloon none disable balloon device
--balloon virtio[,addr=str]
- enable virtio balloon device (default)
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
- ACPI table description
--smbios file=binary
- Load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- Specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- Specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n]
- [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
- [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
- connect the user mode network stack to VLAN 'n', configure its
- DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown);
- use '[down]script=no' to disable script execution;
- use 'fd=h' to connect to an already opened TAP interface
- use 'sndbuf=nbytes' to limit the size of the send buffer; the
- default of 'sndbuf=1048576' can be disabled using 'sndbuf=0'
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net dump[,vlan=n][,file=f][,len=n]
- dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none use it alone to have zero network devices; if no -net option
- is provided, the default is '-net nic -net user'
-
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--pidfile file write PID to 'file'
--singlestep always run in singlestep mode
--S freeze CPU at startup (use 'c' to start execution)
--gdb dev wait for gdb connection on 'dev'
--s shorthand for -gdb tcp::1234
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--enable-kvm enable KVM full virtualization support
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--localtime set the real time clock to local time [default=utc]
--startdate select initial date of the clock
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per
- instruction
--watchdog i6300esb|ib700
- enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
- action when watchdog fires [default=reset]
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--chroot dir Chroot to dir just before starting the VM.
--runas user Change to user id user just before starting the VM.
--no-kvm disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit disable KVM kernel mode PIT
--no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection
--pcidevice host=bus:dev.func[,dma=none][,name=string]
- expose a PCI device to the guest OS.
- dma=none: don't perform any dma translations (default is to use an iommu)
- 'string' is used in log output.
--enable-nesting enable support for running a VM inside the VM (AMD only)
--nvram FILE provide ia64 nvram contents
--tdf enable guest time drift compensation
--kvm-shadow-memory MEGABYTES
- allocate MEGABYTES for kvm mmu shadowing
--mem-path FILE provide backing storage for guest RAM
--mem-prealloc preallocate guest memory (use with -mempath)
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c
index 7b78537..9f4bfea 100644
--- a/tests/qemuhelptest.c
+++ b/tests/qemuhelptest.c
@@ -151,169 +151,6 @@ mymain(void)
# define DO_TEST(name, version, is_kvm, kvm_version, ...) \
DO_TEST_FULL(name, version, is_kvm, kvm_version, VIR_ERR_OK, __VA_ARGS__)
- DO_TEST("qemu-0.9.1", 9001, 0, 0,
- QEMU_CAPS_KQEMU,
- QEMU_CAPS_VNC_COLON,
- QEMU_CAPS_NO_REBOOT,
- QEMU_CAPS_DRIVE,
- QEMU_CAPS_NAME,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_VNC);
- DO_TEST("kvm-74", 9001, 1, 74,
- QEMU_CAPS_VNC_COLON,
- QEMU_CAPS_NO_REBOOT,
- QEMU_CAPS_DRIVE,
- QEMU_CAPS_DRIVE_BOOT,
- QEMU_CAPS_NAME,
- QEMU_CAPS_VNET_HDR,
- QEMU_CAPS_MIGRATE_KVM_STDIO,
- QEMU_CAPS_KVM,
- QEMU_CAPS_DRIVE_FORMAT,
- QEMU_CAPS_MEM_PATH,
- QEMU_CAPS_TDF,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_VNC);
- DO_TEST("kvm-83-rhel56", 9001, 1, 83,
- QEMU_CAPS_VNC_COLON,
- QEMU_CAPS_NO_REBOOT,
- QEMU_CAPS_DRIVE,
- QEMU_CAPS_DRIVE_BOOT,
- QEMU_CAPS_NAME,
- QEMU_CAPS_UUID,
- QEMU_CAPS_VNET_HDR,
- QEMU_CAPS_MIGRATE_QEMU_TCP,
- QEMU_CAPS_MIGRATE_QEMU_EXEC,
- QEMU_CAPS_DRIVE_CACHE_V2,
- QEMU_CAPS_DRIVE_CACHE_UNSAFE,
- QEMU_CAPS_KVM,
- QEMU_CAPS_DRIVE_FORMAT,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_VGA,
- QEMU_CAPS_PCIDEVICE,
- QEMU_CAPS_MEM_PATH,
- QEMU_CAPS_BALLOON,
- QEMU_CAPS_RTC_TD_HACK,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_NO_KVM_PIT,
- QEMU_CAPS_TDF,
- QEMU_CAPS_DRIVE_READONLY,
- QEMU_CAPS_SMBIOS_TYPE,
- QEMU_CAPS_SPICE,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_VNC);
- DO_TEST("qemu-0.10.5", 10005, 0, 0,
- QEMU_CAPS_KQEMU,
- QEMU_CAPS_VNC_COLON,
- QEMU_CAPS_NO_REBOOT,
- QEMU_CAPS_DRIVE,
- QEMU_CAPS_NAME,
- QEMU_CAPS_UUID,
- QEMU_CAPS_MIGRATE_QEMU_TCP,
- QEMU_CAPS_MIGRATE_QEMU_EXEC,
- QEMU_CAPS_DRIVE_CACHE_V2,
- QEMU_CAPS_DRIVE_FORMAT,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_VGA,
- QEMU_CAPS_0_10,
- QEMU_CAPS_ENABLE_KVM,
- QEMU_CAPS_SDL,
- QEMU_CAPS_RTC_TD_HACK,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_VGA_NONE,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_VNC);
- DO_TEST("qemu-kvm-0.10.5", 10005, 1, 0,
- QEMU_CAPS_VNC_COLON,
- QEMU_CAPS_NO_REBOOT,
- QEMU_CAPS_DRIVE,
- QEMU_CAPS_DRIVE_BOOT,
- QEMU_CAPS_NAME,
- QEMU_CAPS_UUID,
- QEMU_CAPS_VNET_HDR,
- QEMU_CAPS_MIGRATE_QEMU_TCP,
- QEMU_CAPS_MIGRATE_QEMU_EXEC,
- QEMU_CAPS_DRIVE_CACHE_V2,
- QEMU_CAPS_KVM,
- QEMU_CAPS_DRIVE_FORMAT,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_VGA,
- QEMU_CAPS_0_10,
- QEMU_CAPS_PCIDEVICE,
- QEMU_CAPS_MEM_PATH,
- QEMU_CAPS_SDL,
- QEMU_CAPS_RTC_TD_HACK,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_NO_KVM_PIT,
- QEMU_CAPS_TDF,
- QEMU_CAPS_NESTING,
- QEMU_CAPS_VGA_NONE,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_VNC);
- DO_TEST("kvm-86", 10050, 1, 0,
- QEMU_CAPS_VNC_COLON,
- QEMU_CAPS_NO_REBOOT,
- QEMU_CAPS_DRIVE,
- QEMU_CAPS_DRIVE_BOOT,
- QEMU_CAPS_NAME,
- QEMU_CAPS_UUID,
- QEMU_CAPS_VNET_HDR,
- QEMU_CAPS_MIGRATE_QEMU_TCP,
- QEMU_CAPS_MIGRATE_QEMU_EXEC,
- QEMU_CAPS_DRIVE_CACHE_V2,
- QEMU_CAPS_KVM,
- QEMU_CAPS_DRIVE_FORMAT,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_VGA,
- QEMU_CAPS_0_10,
- QEMU_CAPS_PCIDEVICE,
- QEMU_CAPS_SDL,
- QEMU_CAPS_RTC_TD_HACK,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_NO_KVM_PIT,
- QEMU_CAPS_TDF,
- QEMU_CAPS_NESTING,
- QEMU_CAPS_SMBIOS_TYPE,
- QEMU_CAPS_VGA_NONE,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_VNC);
- DO_TEST("qemu-kvm-0.11.0-rc2", 10092, 1, 0,
- QEMU_CAPS_VNC_COLON,
- QEMU_CAPS_NO_REBOOT,
- QEMU_CAPS_DRIVE,
- QEMU_CAPS_DRIVE_BOOT,
- QEMU_CAPS_NAME,
- QEMU_CAPS_UUID,
- QEMU_CAPS_VNET_HDR,
- QEMU_CAPS_MIGRATE_QEMU_TCP,
- QEMU_CAPS_MIGRATE_QEMU_EXEC,
- QEMU_CAPS_DRIVE_CACHE_V2,
- QEMU_CAPS_KVM,
- QEMU_CAPS_DRIVE_FORMAT,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_VGA,
- QEMU_CAPS_0_10,
- QEMU_CAPS_PCIDEVICE,
- QEMU_CAPS_MEM_PATH,
- QEMU_CAPS_ENABLE_KVM,
- QEMU_CAPS_BALLOON,
- QEMU_CAPS_SDL,
- QEMU_CAPS_RTC_TD_HACK,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_NO_KVM_PIT,
- QEMU_CAPS_TDF,
- QEMU_CAPS_BOOT_MENU,
- QEMU_CAPS_NESTING,
- QEMU_CAPS_NAME_PROCESS,
- QEMU_CAPS_SMBIOS_TYPE,
- QEMU_CAPS_VGA_NONE,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_VNC);
DO_TEST("qemu-0.12.1", 12001, 0, 0,
QEMU_CAPS_VNC_COLON,
QEMU_CAPS_NO_REBOOT,
--
2.5.0
More information about the libvir-list
mailing list