[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[libvirt] [PATCH v2 3/3] tests: Introduce check-file-access.pl



This script will check output generated by virtestmock against a
white list. All non matching records found are printed out. So
far, the white list is rather sparse at the moment.
This test should be ran only after all other tests finished, and
should cleanup the temporary file before their execution. Because
I'm unable to reflect these requirements in Makefile.am
correctly, I've introduced new target 'check-access' under which
this test is available.

Signed-off-by: Michal Privoznik <mprivozn redhat com>
---
 Makefile.am                     |   3 ++
 tests/Makefile.am               |  13 +++++
 tests/check-file-access.pl      | 106 ++++++++++++++++++++++++++++++++++++++++
 tests/file_access_whitelist.txt |  23 +++++++++
 4 files changed, 145 insertions(+)
 create mode 100755 tests/check-file-access.pl
 create mode 100644 tests/file_access_whitelist.txt

diff --git a/Makefile.am b/Makefile.am
index c52a4cb..da07e6c 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -67,6 +67,9 @@ rpm: clean
 
 check-local: all tests
 
+check-access:
+	@($(MAKE) $(AM_MAKEFLAGS) -C tests check-access)
+
 cov: clean-cov
 	$(MKDIR_P) $(top_builddir)/coverage
 	$(LCOV) -c -o $(top_builddir)/coverage/libvirt.info.tmp \
diff --git a/tests/Makefile.am b/tests/Makefile.am
index da68f2e..7cd641d 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -451,6 +451,19 @@ test_libraries += virusbmock.la \
 		$(NULL)
 endif WITH_LINUX
 
+if WITH_LINUX
+check-access: file-access-clean
+	$(MAKE) $(AM_MAKEFLAGS) check
+	$(PERL) check-file-access.pl
+
+file-access-clean:
+	> test_file_access.txt
+endif WITH_LINUX
+
+EXTRA_DIST += \
+	check-file-access.pl \
+	file_access_whitelist.txt
+
 if WITH_TESTS
 noinst_PROGRAMS = $(test_programs) $(test_helpers)
 noinst_LTLIBRARIES = $(test_libraries)
diff --git a/tests/check-file-access.pl b/tests/check-file-access.pl
new file mode 100755
index 0000000..6e59201
--- /dev/null
+++ b/tests/check-file-access.pl
@@ -0,0 +1,106 @@
+#!/usr/bin/perl -w
+#
+# Copyright (C) 2016 Red Hat, Inc.
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library.  If not, see
+# <http://www.gnu.org/licenses/>.
+#
+# This script is supposed to check test_file_access.txt file and
+# warn about file accesses outside our working tree.
+#
+#
+
+use strict;
+use warnings;
+
+my $access_file = "test_file_access.txt";
+my $whitelist_file = "file_access_whitelist.txt";
+
+my @files;
+my @whitelist;
+
+open FILE, "<", $access_file or die "Unable to open $access_file: $!";
+while (<FILE>) {
+    chomp;
+    if (/^\s*#.*$/) {
+        # comment
+    } elsif (/^(\S*):\s*(\S*)(\s*:\s*(.*))?$/) {
+        my %rec;
+        ${rec}{path} = $1;
+        ${rec}{progname} = $2;
+        if (defined $4) {
+            ${rec}{testname} = $4;
+        }
+        push (@files, \%rec);
+    } else {
+        die "Malformed line $_";
+    }
+}
+close FILE;
+
+open FILE, "<", $whitelist_file or die "Unable to open $whitelist_file: $!";
+while (<FILE>) {
+    chomp;
+    if (/^\s*#.*$/) {
+        # comment
+    } elsif (/^(\S*)(:\s*(\S*)(\s*:\s*(.*))?)?$/) {
+        my %rec;
+        ${rec}{path} = $1;
+        if (defined $3) {
+            ${rec}{progname} = $3;
+        }
+        if (defined $5) {
+            ${rec}{testname} = $5;
+        }
+        push (@whitelist, \%rec);
+    } else {
+        die "Malformed line $_";
+    }
+}
+close FILE;
+
+# Now we should check if %traces is included in $whitelist. For
+# now checking just keys is sufficient
+my $error = 0;
+for my $file (@files) {
+    my $match = 0;
+
+    for my $rule (@whitelist) {
+        if (not %${file}{path} =~ m/^$rule->{path}$/) {
+            next;
+        }
+
+        if (defined %${rule}{progname} and
+            not %${file}{progname} =~ m/^$rule->{progname}$/) {
+            next;
+        }
+
+        if (defined %${rule}{testname} and
+            defined %${file}{testname} and
+            not %${file}{testname} =~ m/^$rule->{testname}$/) {
+            next;
+        }
+
+        $match = 1;
+    }
+
+    if (not $match) {
+        $error = 1;
+        print "$file->{path}: $file->{progname}";
+        print ": $file->{testname}" if defined %${file}{testname};
+        print "\n";
+    }
+}
+
+$error;
diff --git a/tests/file_access_whitelist.txt b/tests/file_access_whitelist.txt
new file mode 100644
index 0000000..850b285
--- /dev/null
+++ b/tests/file_access_whitelist.txt
@@ -0,0 +1,23 @@
+# This is a whitelist that allows accesses to files not in our
+# build directory nor source directory. The records are in the
+# following format:
+#
+#  $path: $progname: $testname
+#
+# All these three are evaluated as perl RE. So to allow /dev/sda
+# and /dev/sdb, you can just '/dev/sd[a-b]', or to allow
+# /proc/$pid/status you can '/proc/\d+/status' and so on.
+# Moreover, $progname and $testname can be empty, in which which
+# case $path is allowed for all tests.
+
+/bin/cat: sysinfotest
+/bin/dirname: sysinfotest: x86 sysinfo
+/bin/sleep: commandtest
+/bin/true: commandtest
+/dev/null
+/dev/urandom
+/etc/hosts
+/proc/\d+/status
+
+# This is just a dummy example, DO NOT USE IT LIKE THAT!
+.*: nonexistent-test-touching-everything
-- 
2.8.1


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]