[libvirt] [RFC PATCH 05/11] docs: Use our XSLT template to generate list of supported pool types

[Erik Skultety]

Since we do have this template at hand, why not using it wherever
possible. Also, just to be grammatically correct, let's use singular,
aka 'pool' instead of plural in the enumerated list of supported types.

Signed-off-by: Erik Skultety <eskultet at redhat.com>
---
 docs/storage.html.in | 62 ++++++++++------------------------------------------
 1 file changed, 11 insertions(+), 51 deletions(-)

diff --git a/docs/storage.html.in b/docs/storage.html.in
index 5e18f02c58..2487ede67b 100644
--- a/docs/storage.html.in
+++ b/docs/storage.html.in
@@ -83,47 +83,7 @@
     <p>
       Libvirt supports the following storage pool types:
     </p>
-    <ul>
-      <li>
-        <a href="#StorageBackendDir">Directory backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendFS">Local filesystem backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendNetFS">Network filesystem backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendLogical">Logical backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendDisk">Disk backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendISCSI">iSCSI backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendSCSI">SCSI backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendMultipath">Multipath backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendRBD">RBD (RADOS Block Device) backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendSheepdog">Sheepdog backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendGluster">Gluster backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendZFS">ZFS backend</a>
-      </li>
-      <li>
-        <a href="#StorageBackendVstorage">Virtuozzo storage backend</a>
-      </li>
-    </ul>
+    <ul id="toc"></ul>
 
     <h2><a name="StorageBackendDir">Directory pool</a></h2>
     <p>
@@ -306,7 +266,7 @@
     </p>
 
 
-    <h2><a name="StorageBackendLogical">Logical volume pools</a></h2>
+    <h2><a name="StorageBackendLogical">Logical volume pool</a></h2>
     <p>
       This provides a pool based on an LVM volume group. For a
       pre-defined LVM volume group, simply providing the group
@@ -343,7 +303,7 @@
     </p>
 
 
-    <h2><a name="StorageBackendDisk">Disk volume pools</a></h2>
+    <h2><a name="StorageBackendDisk">Disk volume pool</a></h2>
     <p>
       This provides a pool based on a physical disk. Volumes are created
       by adding partitions to the disk. Disk pools have constraints
@@ -434,7 +394,7 @@
     </ul>
 
 
-    <h2><a name="StorageBackendISCSI">iSCSI volume pools</a></h2>
+    <h2><a name="StorageBackendISCSI">iSCSI volume pool</a></h2>
     <p>
       This provides a pool based on an iSCSI target. Volumes must be
       pre-allocated on the iSCSI server, and cannot be created via
@@ -473,7 +433,7 @@
       The iSCSI volume pool does not use the volume format type element.
     </p>
 
-    <h2><a name="StorageBackendSCSI">SCSI volume pools</a></h2>
+    <h2><a name="StorageBackendSCSI">SCSI volume pool</a></h2>
     <p>
       This provides a pool based on a SCSI HBA. Volumes are preexisting SCSI
       LUNs, and cannot be created via the libvirt APIs. Since /dev/XXX names
@@ -505,7 +465,7 @@
       The SCSI volume pool does not use the volume format type element.
     </p>
 
-    <h2><a name="StorageBackendMultipath">Multipath pools</a></h2>
+    <h2><a name="StorageBackendMultipath">Multipath pool</a></h2>
     <p>
       This provides a pool that contains all the multipath devices on the
       host. Therefore, only one Multipath pool may be configured per host.
@@ -538,7 +498,7 @@
       The Multipath volume pool does not use the volume format type element.
     </p>
 
-    <h2><a name="StorageBackendRBD">RBD pools</a></h2>
+    <h2><a name="StorageBackendRBD">RBD pool</a></h2>
     <p>
       This storage driver provides a pool which contains all RBD
       images in a RADOS pool.  RBD (RADOS Block Device) is part
@@ -611,7 +571,7 @@
       The RBD pool does not use the volume format type element.
     </p>
 
-    <h2><a name="StorageBackendSheepdog">Sheepdog pools</a></h2>
+    <h2><a name="StorageBackendSheepdog">Sheepdog pool</a></h2>
     <p>
       This provides a pool based on a Sheepdog Cluster.
       Sheepdog is a distributed storage system for QEMU/KVM.
@@ -670,7 +630,7 @@
       The Sheepdog pool does not use the volume format type element.
     </p>
 
-    <h2><a name="StorageBackendGluster">Gluster pools</a></h2>
+    <h2><a name="StorageBackendGluster">Gluster pool</a></h2>
     <p>
       This provides a pool based on native Gluster access.  Gluster is
       a distributed file system that can be exposed to the user via
@@ -756,7 +716,7 @@
       pool type.
     </p>
 
-    <h2><a name="StorageBackendZFS">ZFS pools</a></h2>
+    <h2><a name="StorageBackendZFS">ZFS pool</a></h2>
     <p>
       This provides a pool based on the ZFS filesystem. Initially it was developed
       for FreeBSD, and <span class="since">since 1.3.2</span> experimental support
@@ -794,7 +754,7 @@
     <p>
       The ZFS volume pool does not use the volume format type element.
     </p>
-    <h2><a name="StorageBackendVstorage">Vstorage pools</a></h2>
+    <h2><a name="StorageBackendVstorage">Vstorage pool</a></h2>
     <p>
       This provides a pool based on Virtuozzo storage. Virtuozzo Storage is
       a highly available distributed software-defined storage with built-in
-- 
2.12.2