[libvirt] [PATCH v2 7/9] backup: Introduce virDomainBackup APIs
Eric Blake
eblake at redhat.com
Fri Oct 12 05:10:09 UTC 2018
Introduce a few more new public APIs related to incremental backups.
This builds on the previous notion of a checkpoint (without an
existing checkpoint, the new API is a full backup, differing only
from virDomainCopy in the point of time chosen); and also allows
creation of a new checkpoint at the same time as starting the backup
(after all, an incremental backup is only useful if it covers the
state since the previous backup). It also enhances event reporting
for signaling when a push model backup completes (where the
hypervisor creates the backup); note that the pull model does not
have an event (starting the backup lets a third party access the
data, and only the third party knows when it is finished).
The full list of new API:
virDomainBackupBegin;
virDomainBackupEnd;
virDomainBackupGetXMLDesc;
Signed-off-by: Eric Blake <eblake at redhat.com>
---
include/libvirt/libvirt-domain-checkpoint.h | 21 ++
include/libvirt/libvirt-domain.h | 14 +-
src/driver-hypervisor.h | 14 ++
src/libvirt-domain-checkpoint.c | 213 ++++++++++++++++++++
src/libvirt-domain.c | 8 +-
src/libvirt_public.syms | 3 +
tools/virsh-domain.c | 3 +-
7 files changed, 272 insertions(+), 4 deletions(-)
diff --git a/include/libvirt/libvirt-domain-checkpoint.h b/include/libvirt/libvirt-domain-checkpoint.h
index cfca8f4b7f..0631a082b3 100644
--- a/include/libvirt/libvirt-domain-checkpoint.h
+++ b/include/libvirt/libvirt-domain-checkpoint.h
@@ -153,4 +153,25 @@ int virDomainCheckpointDelete(virDomainCheckpointPtr checkpoint,
int virDomainCheckpointRef(virDomainCheckpointPtr checkpoint);
int virDomainCheckpointFree(virDomainCheckpointPtr checkpoint);
+typedef enum {
+ VIR_DOMAIN_BACKUP_BEGIN_NO_METADATA = (1 << 0), /* Make checkpoint without
+ remembering it */
+ /* TODO: VIR_DOMAIN_BACKUP_BEGIN_QUIESCE */
+} virDomainBackupBeginFlags;
+
+/* Begin an incremental backup job, possibly creating a checkpoint. */
+int virDomainBackupBegin(virDomainPtr domain, const char *diskXml,
+ const char *checkpointXml, unsigned int flags);
+
+/* Learn about an ongoing backup job. */
+char *virDomainBackupGetXMLDesc(virDomainPtr domain, int id,
+ unsigned int flags);
+
+typedef enum {
+ VIR_DOMAIN_BACKUP_END_ABORT = (1 << 0), /* Abandon a push model backup */
+} virDomainBackupEndFlags;
+
+/* Complete (or abort) an incremental backup job. */
+int virDomainBackupEnd(virDomainPtr domain, int id, unsigned int flags);
+
#endif /* __VIR_LIBVIRT_DOMAIN_CHECKPOINT_H__ */
diff --git a/include/libvirt/libvirt-domain.h b/include/libvirt/libvirt-domain.h
index fdd2d6b8ea..11692e6ae1 100644
--- a/include/libvirt/libvirt-domain.h
+++ b/include/libvirt/libvirt-domain.h
@@ -4,7 +4,7 @@
* Description: Provides APIs for the management of domains
* Author: Daniel Veillard <veillard at redhat.com>
*
- * Copyright (C) 2006-2015 Red Hat, Inc.
+ * Copyright (C) 2006-2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
@@ -3168,6 +3168,7 @@ typedef enum {
VIR_DOMAIN_JOB_OPERATION_SNAPSHOT = 6,
VIR_DOMAIN_JOB_OPERATION_SNAPSHOT_REVERT = 7,
VIR_DOMAIN_JOB_OPERATION_DUMP = 8,
+ VIR_DOMAIN_JOB_OPERATION_BACKUP = 9,
# ifdef VIR_ENUM_SENTINELS
VIR_DOMAIN_JOB_OPERATION_LAST
@@ -3183,6 +3184,14 @@ typedef enum {
*/
# define VIR_DOMAIN_JOB_OPERATION "operation"
+/**
+ * VIR_DOMAIN_JOB_ID:
+ *
+ * virDomainGetJobStats field: the id of the job (so far, only for jobs
+ * started by virDomainBackupBegin()), as VIR_TYPED_PARAM_INT.
+ */
+# define VIR_DOMAIN_JOB_ID "id"
+
/**
* VIR_DOMAIN_JOB_TIME_ELAPSED:
*
@@ -3997,7 +4006,8 @@ typedef void (*virConnectDomainEventMigrationIterationCallback)(virConnectPtr co
* @nparams: size of the params array
* @opaque: application specific data
*
- * This callback occurs when a job (such as migration) running on the domain
+ * This callback occurs when a job (such as migration or push-model
+ * virDomainBackupBegin()) running on the domain
* is completed. The params array will contain statistics of the just completed
* job as virDomainGetJobStats would return. The callback must not free @params
* (the array will be freed once the callback finishes).
diff --git a/src/driver-hypervisor.h b/src/driver-hypervisor.h
index ee8a9a3e0e..2ae0b381a9 100644
--- a/src/driver-hypervisor.h
+++ b/src/driver-hypervisor.h
@@ -1369,6 +1369,17 @@ typedef int
(*virDrvDomainCheckpointDelete)(virDomainCheckpointPtr checkpoint,
unsigned int flags);
+typedef int
+(*virDrvDomainBackupBegin)(virDomainPtr domain, const char *diskXml,
+ const char *checkpointXml, unsigned int flags);
+
+typedef char *
+(*virDrvDomainBackupGetXMLDesc)(virDomainPtr domain, int id,
+ unsigned int flags);
+
+typedef int
+(*virDrvDomainBackupEnd)(virDomainPtr domain, int id, unsigned int flags);
+
typedef struct _virHypervisorDriver virHypervisorDriver;
typedef virHypervisorDriver *virHypervisorDriverPtr;
@@ -1630,6 +1641,9 @@ struct _virHypervisorDriver {
virDrvDomainCheckpointIsCurrent domainCheckpointIsCurrent;
virDrvDomainCheckpointHasMetadata domainCheckpointHasMetadata;
virDrvDomainCheckpointDelete domainCheckpointDelete;
+ virDrvDomainBackupBegin domainBackupBegin;
+ virDrvDomainBackupGetXMLDesc domainBackupGetXMLDesc;
+ virDrvDomainBackupEnd domainBackupEnd;
};
diff --git a/src/libvirt-domain-checkpoint.c b/src/libvirt-domain-checkpoint.c
index 8a7b5b3c56..dd1dd82123 100644
--- a/src/libvirt-domain-checkpoint.c
+++ b/src/libvirt-domain-checkpoint.c
@@ -721,3 +721,216 @@ virDomainCheckpointFree(virDomainCheckpointPtr checkpoint)
virObjectUnref(checkpoint);
return 0;
}
+
+
+/**
+ * virDomainBackupBegin:
+ * @domain: a domain object
+ * @diskXml: description of storage to utilize and expose during
+ * the backup, or NULL
+ * @checkpointXml: description of a checkpoint to create, or NULL
+ * @flags: bitwise-OR of supported virDomainBackupBeginFlags
+ *
+ * Start a point-in-time backup job for the specified disks of a
+ * running domain.
+ *
+ * A backup job is mutually exclusive with domain migration
+ * (particularly when the job sets up an NBD export, since it is not
+ * possible to tell any NBD clients about a server migrating between
+ * hosts). For now, backup jobs are also mutually exclusive with any
+ * other block job on the same device, although this restriction may
+ * be lifted in a future release. Progress of the backup job can be
+ * tracked via virDomainGetJobStats(). The job remains active until a
+ * subsequent call to virDomainBackupEnd(), even if it no longer has
+ * anything to copy.
+ *
+ * This API differs from virDomainBlockCopy() in that it can grab the
+ * state of more than one disk in parallel, and the state is captured
+ * as of the start of the job, rather than the end.
+ *
+ * There are two fundamental backup approaches. The first, called a
+ * push model, instructs the hypervisor to copy the state of the guest
+ * disk to the designated storage destination (which may be on the
+ * local file system or a network device); in this mode, the
+ * hypervisor writes the content of the guest disk to the destination,
+ * then emits VIR_DOMAIN_EVENT_ID_JOB_COMPLETED when the backup is
+ * either complete or failed (the backup image is invalid if the job
+ * is ended prior to the event being emitted). The second, called a
+ * pull model, instructs the hypervisor to expose the state of the
+ * guest disk over an NBD export; a third-party client can then
+ * connect to this export, and read whichever portions of the disk it
+ * desires. In this mode, there is no event; libvirt has to be
+ * informed when the third-party NBD client is done and the backup
+ * resources can be released.
+ *
+ * The @diskXml parameter is optional but usually provided, and
+ * contains details about the backup, including which backup mode to
+ * use, whether the backup is incremental from a previous checkpoint,
+ * which disks participate in the backup, the destination for a push
+ * model backup, and the temporary storage and NBD server details for
+ * a pull model backup. If omitted, the backup attempts to default to
+ * a push mode full backup of all disks, where libvirt generates a
+ * filename for each disk by appending a suffix of a timestamp in
+ * seconds since the Epoch. virDomainBackupGetXMLDesc() can be called
+ * to learn actual values selected. For more information, see
+ * formatcheckpoint.html#BackupAttributes.
+ *
+ * The @checkpointXml parameter is optional; if non-NULL, then libvirt
+ * behaves as if virDomainCheckpointCreateXML() were called with
+ * @checkpointXml and the flag VIR_DOMAIN_BACKUP_BEGIN_NO_METADATA
+ * forwarded appropriately, atomically covering the same guest state
+ * that will be part of the backup. The creation of a new checkpoint
+ * allows for future incremental backups. Note that some hypervisors
+ * may require a particular disk format, such as qcow2, in order to
+ * take advantage of checkpoints, while allowing arbitrary formats
+ * if checkpoints are not involved.
+ *
+ * Returns a non-negative job id on success, or negative on failure.
+ * This operation returns quickly, such that a user can choose to
+ * start a backup job between virDomainFSFreeze() and
+ * virDomainFSThaw() in order to create the backup while guest I/O is
+ * quiesced.
+ */
+/* FIXME: Do we need a specific API for listing all current backup
+ * jobs (which, at the moment, is at most one job), or is it better to
+ * refactor other existing job APIs in libvirt-domain.c to have job-id
+ * counterparts along with a generic listing of all jobs (with flags
+ * for filtering to specific job types)?
+ */
+int
+virDomainBackupBegin(virDomainPtr domain, const char *diskXml,
+ const char *checkpointXml, unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(domain, "diskXml=%s, checkpointXml=%s, flags=0x%x",
+ NULLSTR(diskXml), NULLSTR(checkpointXml), flags);
+
+ virResetLastError();
+
+ virCheckDomainReturn(domain, -1);
+ conn = domain->conn;
+
+ virCheckReadOnlyGoto(conn->flags, error);
+ if (flags & VIR_DOMAIN_BACKUP_BEGIN_NO_METADATA)
+ virCheckNonNullArgGoto(checkpointXml, error);
+
+ if (conn->driver->domainBackupBegin) {
+ int ret;
+ ret = conn->driver->domainBackupBegin(domain, diskXml, checkpointXml,
+ flags);
+ if (!ret)
+ goto error;
+ return ret;
+ }
+
+ virReportUnsupportedError();
+ error:
+ virDispatchError(conn);
+ return -1;
+}
+
+
+/**
+ * virDomainBackupGetXMLDesc:
+ * @domain: a domain object
+ * @id: the id of an active backup job previously started with
+ * virDomainBackupBegin()
+ * @flags: bitwise-OR of subset of virDomainXMLFlags
+ *
+ * In some cases, a user can start a backup job without supplying all
+ * details, and rely on libvirt to fill in the rest (for example,
+ * selecting the port used for an NBD export). This API can then be
+ * used to learn what default values were chosen.
+ *
+ * No security-sensitive data will be included unless @flags contains
+ * VIR_DOMAIN_XML_SECURE; this flag is rejected on read-only
+ * connections. For this API, @flags should not contain either
+ * VIR_DOMAIN_XML_INACTIVE or VIR_DOMAIN_XML_UPDATE_CPU.
+ *
+ * Returns a NUL-terminated UTF-8 encoded XML instance, or NULL in
+ * case of error. The caller must free() the returned value.
+ */
+char *
+virDomainBackupGetXMLDesc(virDomainPtr domain, int id, unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(domain, "id=%d, flags=0x%x", id, flags);
+
+ virResetLastError();
+
+ virCheckDomainReturn(domain, NULL);
+ conn = domain->conn;
+
+ if ((conn->flags & VIR_CONNECT_RO) &&
+ (flags & VIR_DOMAIN_CHECKPOINT_XML_SECURE)) {
+ virReportError(VIR_ERR_OPERATION_DENIED, "%s",
+ _("virDomainCheckpointGetXMLDesc with secure flag"));
+ goto error;
+ }
+ virCheckNonNegativeArgGoto(id, error);
+
+ if (conn->driver->domainBackupGetXMLDesc) {
+ char *ret;
+ ret = conn->driver->domainBackupGetXMLDesc(domain, id, flags);
+ if (!ret)
+ goto error;
+ return ret;
+ }
+
+ virReportUnsupportedError();
+ error:
+ virDispatchError(conn);
+ return NULL;
+}
+
+
+/**
+ * virDomainBackupEnd:
+ * @domain: a domain object
+ * @id: the id of an active backup job previously started with
+ * virDomainBackupBegin()
+ * @flags: bitwise-OR of supported virDomainBackupEndFlags
+ *
+ * Conclude a point-in-time backup job @id on the given domain.
+ *
+ * If the backup job uses the push model, but the event marking that
+ * all data has been copied has not yet been emitted, then the command
+ * fails unless @flags includes VIR_DOMAIN_BACKUP_END_ABORT. If the
+ * event has been issued, or if the backup uses the pull model, the
+ * flag has no effect.
+ *
+ * Returns 1 if the backup job completed successfully (the backup
+ * destination file in a push model is consistent), 0 if the job was
+ * aborted successfully (only when VIR_DOMAIN_BACKUP_END_ABORT is
+ * passed; the destination file is unusable), and -1 on failure.
+ */
+int
+virDomainBackupEnd(virDomainPtr domain, int id, unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(domain, "id=%d, flags=0x%x", id, flags);
+
+ virResetLastError();
+
+ virCheckDomainReturn(domain, -1);
+ conn = domain->conn;
+
+ virCheckReadOnlyGoto(conn->flags, error);
+ virCheckNonNegativeArgGoto(id, error);
+
+ if (conn->driver->domainBackupEnd) {
+ int ret;
+ ret = conn->driver->domainBackupEnd(domain, id, flags);
+ if (!ret)
+ goto error;
+ return ret;
+ }
+
+ virReportUnsupportedError();
+ error:
+ virDispatchError(conn);
+ return -1;
+}
diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
index 7690339521..002d214880 100644
--- a/src/libvirt-domain.c
+++ b/src/libvirt-domain.c
@@ -1,7 +1,7 @@
/*
* libvirt-domain.c: entry points for virDomainPtr APIs
*
- * Copyright (C) 2006-2015 Red Hat, Inc.
+ * Copyright (C) 2006-2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
@@ -10261,6 +10261,12 @@ virDomainBlockRebase(virDomainPtr dom, const char *disk,
* over the destination format, the ability to copy to a destination that
* is not a local file, and the possibility of additional tuning parameters.
*
+ * The copy created by this API is not finalized until the job ends,
+ * and does not lend itself to incremental backups (beyond what
+ * VIR_DOMAIN_BLOCK_COPY_SHALLOW provides) nor to third-party control
+ * over the data being copied. For those features, use
+ * virDomainBackupBegin().
+ *
* Returns 0 if the operation has started, -1 on failure.
*/
int
diff --git a/src/libvirt_public.syms b/src/libvirt_public.syms
index fb58b95344..61a5085dcb 100644
--- a/src/libvirt_public.syms
+++ b/src/libvirt_public.syms
@@ -811,6 +811,9 @@ LIBVIRT_4.5.0 {
LIBVIRT_4.9.0 {
global:
+ virDomainBackupBegin;
+ virDomainBackupEnd;
+ virDomainBackupGetXMLDesc;
virDomainCheckpointCreateXML;
virDomainCheckpointCurrent;
virDomainCheckpointDelete;
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index 372bdb95d3..ba4a0f5310 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -6069,7 +6069,8 @@ VIR_ENUM_IMPL(virshDomainJobOperation,
N_("Outgoing migration"),
N_("Snapshot"),
N_("Snapshot revert"),
- N_("Dump"))
+ N_("Dump"),
+ N_("Backup"))
static const char *
virshDomainJobOperationToString(int op)
--
2.17.1
More information about the libvir-list
mailing list