[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[libvirt] [PATCH 04/23] qemu: fill out usage-specific TLS settings after parsing



Instead of copying the default default values upfront
and then wondering whether the user has given us a new default,
leave the per-usage TLS certdirs and secrets empty during
parsing and only fill them afterwards if they weren't provided
by the user.

This means that instead of looking whether the specific certdir
paths match the default default, the Validate function (which
is called inbetween parsing and setting the defaults) can error
out for missing directories if the value is present, because
it must've come from the user.

Signed-off-by: Ján Tomko <jtomko redhat com>
---
 src/qemu/qemu_conf.c | 150 ++++++++++++++++---------------------------
 1 file changed, 56 insertions(+), 94 deletions(-)

diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c
index a0855032e5..837bff6b30 100644
--- a/src/qemu/qemu_conf.c
+++ b/src/qemu/qemu_conf.c
@@ -277,35 +277,6 @@ virQEMUDriverConfigPtr virQEMUDriverConfigNew(bool privileged)
     if (VIR_STRDUP(cfg->spiceListen, VIR_LOOPBACK_IPV4_ADDR) < 0)
         goto error;
 
-    /*
-     * If a "SYSCONFDIR" + "pki/libvirt-<val>" exists, then assume someone
-     * has created a val specific area to place service specific certificates.
-     *
-     * If the service specific directory doesn't exist, 'assume' that the
-     * user has created and populated the "SYSCONFDIR" + "pki/libvirt-default".
-     */
-#define SET_TLS_X509_CERT_DEFAULT(val) \
-    do { \
-        if (virFileExists(SYSCONFDIR "/pki/libvirt-"#val)) { \
-            if (VIR_STRDUP(cfg->val ## TLSx509certdir, \
-                           SYSCONFDIR "/pki/libvirt-"#val) < 0) \
-                goto error; \
-        } else { \
-            if (VIR_STRDUP(cfg->val ## TLSx509certdir, \
-                           cfg->defaultTLSx509certdir) < 0) \
-                goto error; \
-        } \
-    } while (0)
-
-    SET_TLS_X509_CERT_DEFAULT(vnc);
-    SET_TLS_X509_CERT_DEFAULT(spice);
-    SET_TLS_X509_CERT_DEFAULT(chardev);
-    SET_TLS_X509_CERT_DEFAULT(migrate);
-    SET_TLS_X509_CERT_DEFAULT(vxhs);
-    SET_TLS_X509_CERT_DEFAULT(nbd);
-
-#undef SET_TLS_X509_CERT_DEFAULT
-
     cfg->remotePortMin = QEMU_REMOTE_PORT_MIN;
     cfg->remotePortMax = QEMU_REMOTE_PORT_MAX;
 
@@ -452,45 +423,6 @@ virQEMUDriverConfigHugeTLBFSInit(virHugeTLBFSPtr hugetlbfs,
 }
 
 
-/**
- * @cfg: Just read config TLS values
- *
- * If the default_tls_x509_cert_dir was uncommented or changed from
- * the default value assigned to the *_tls_x509_cert_dir values when
- * virQEMUDriverConfigNew was executed, we need to check if we need
- * to update the other defaults.
- *
- * Returns 0 on success, -1 on failure
- */
-static int
-virQEMUDriverConfigTLSDirResetDefaults(virQEMUDriverConfigPtr cfg)
-{
-    /* Not changed or set to the default default, nothing to do */
-    if (!cfg->checkdefaultTLSx509certdir ||
-        STREQ(cfg->defaultTLSx509certdir, SYSCONFDIR "/pki/qemu"))
-        return 0;
-
-#define CHECK_RESET_CERT_DIR_DEFAULT(val) \
-    do { \
-        if (STREQ(cfg->val ## TLSx509certdir, SYSCONFDIR "/pki/qemu")) { \
-            VIR_FREE(cfg->val ## TLSx509certdir); \
-            if (VIR_STRDUP(cfg->val ## TLSx509certdir, \
-                           cfg->defaultTLSx509certdir) < 0) \
-                return -1; \
-        } \
-    } while (0)
-
-    CHECK_RESET_CERT_DIR_DEFAULT(vnc);
-    CHECK_RESET_CERT_DIR_DEFAULT(spice);
-    CHECK_RESET_CERT_DIR_DEFAULT(chardev);
-    CHECK_RESET_CERT_DIR_DEFAULT(migrate);
-    CHECK_RESET_CERT_DIR_DEFAULT(vxhs);
-    CHECK_RESET_CERT_DIR_DEFAULT(nbd);
-
-    return 0;
-}
-
-
 int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg,
                                 const char *filename,
                                 bool privileged)
@@ -603,23 +535,13 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg,
             goto cleanup; \
         if (rv == 1) \
             cfg->val## TLSx509verifyPresent = true; \
-        if ((rv = virConfGetValueString(conf, #val "_tls_x509_cert_dir", \
-                                  &cfg->val## TLSx509certdir)) < 0) \
+        if (virConfGetValueString(conf, #val "_tls_x509_cert_dir", \
+                                  &cfg->val## TLSx509certdir) < 0) \
             goto cleanup; \
         if (virConfGetValueString(conf, \
                                   #val "_tls_x509_secret_uuid", \
                                   &cfg->val## TLSx509secretUUID) < 0) \
             goto cleanup; \
-        /* Only if a *tls_x509_cert_dir wasn't found (e.g. rv == 0), should \
-         * we copy the defaultTLSx509secretUUID. If this environment needs \
-         * a passphrase to decode the certificate, then it should provide \
-         * it's own secretUUID for that. */ \
-        if (rv == 0 && !cfg->val## TLSx509secretUUID && \
-            cfg->defaultTLSx509secretUUID) { \
-            if (VIR_STRDUP(cfg->val## TLSx509secretUUID, \
-                           cfg->defaultTLSx509secretUUID) < 0) \
-                goto cleanup; \
-        } \
     } while (0)
 
     if (virConfGetValueBool(conf, "chardev_tls", &cfg->chardevTLS) < 0)
@@ -630,9 +552,6 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg,
 
 #undef GET_CONFIG_TLS_CERTINFO
 
-    if (virQEMUDriverConfigTLSDirResetDefaults(cfg) < 0)
-        goto cleanup;
-
     if (virConfGetValueUInt(conf, "remote_websocket_port_min", &cfg->webSocketPortMin) < 0)
         goto cleanup;
     if (cfg->webSocketPortMin < QEMU_WEBSOCKET_PORT_MIN) {
@@ -989,7 +908,6 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg,
 int
 virQEMUDriverConfigValidate(virQEMUDriverConfigPtr cfg)
 {
-    /* If the default entry was uncommented, then validate existence */
     if (cfg->checkdefaultTLSx509certdir) {
         if (!virFileExists(cfg->defaultTLSx509certdir)) {
             virReportError(VIR_ERR_CONF_SYNTAX,
@@ -1000,11 +918,7 @@ virQEMUDriverConfigValidate(virQEMUDriverConfigPtr cfg)
         }
     }
 
-    /* For each of the others - if the value is not to the default default
-     * then check if the directory exists (this may duplicate the check done
-     * during virQEMUDriverConfigNew).
-     */
-    if (STRNEQ(cfg->vncTLSx509certdir, SYSCONFDIR "/pki/qemu") &&
+    if (cfg->vncTLSx509certdir &&
         !virFileExists(cfg->vncTLSx509certdir)) {
         virReportError(VIR_ERR_CONF_SYNTAX,
                        _("vnc_tls_x509_cert_dir directory '%s' does not exist"),
@@ -1012,7 +926,7 @@ virQEMUDriverConfigValidate(virQEMUDriverConfigPtr cfg)
         return -1;
     }
 
-    if (STRNEQ(cfg->spiceTLSx509certdir, SYSCONFDIR "/pki/qemu") &&
+    if (cfg->spiceTLSx509certdir &&
         !virFileExists(cfg->spiceTLSx509certdir)) {
         virReportError(VIR_ERR_CONF_SYNTAX,
                        _("spice_tls_x509_cert_dir directory '%s' does not exist"),
@@ -1020,7 +934,7 @@ virQEMUDriverConfigValidate(virQEMUDriverConfigPtr cfg)
         return -1;
     }
 
-    if (STRNEQ(cfg->chardevTLSx509certdir, SYSCONFDIR "/pki/qemu") &&
+    if (cfg->chardevTLSx509certdir &&
         !virFileExists(cfg->chardevTLSx509certdir)) {
         virReportError(VIR_ERR_CONF_SYNTAX,
                        _("chardev_tls_x509_cert_dir directory '%s' does not exist"),
@@ -1028,7 +942,7 @@ virQEMUDriverConfigValidate(virQEMUDriverConfigPtr cfg)
         return -1;
     }
 
-    if (STRNEQ(cfg->migrateTLSx509certdir, SYSCONFDIR "/pki/qemu") &&
+    if (cfg->migrateTLSx509certdir &&
         !virFileExists(cfg->migrateTLSx509certdir)) {
         virReportError(VIR_ERR_CONF_SYNTAX,
                        _("migrate_tls_x509_cert_dir directory '%s' does not exist"),
@@ -1036,7 +950,7 @@ virQEMUDriverConfigValidate(virQEMUDriverConfigPtr cfg)
         return -1;
     }
 
-    if (STRNEQ(cfg->vxhsTLSx509certdir, SYSCONFDIR "/pki/qemu") &&
+    if (cfg->vxhsTLSx509certdir &&
         !virFileExists(cfg->vxhsTLSx509certdir)) {
         virReportError(VIR_ERR_CONF_SYNTAX,
                        _("vxhs_tls_x509_cert_dir directory '%s' does not exist"),
@@ -1044,7 +958,7 @@ virQEMUDriverConfigValidate(virQEMUDriverConfigPtr cfg)
         return -1;
     }
 
-    if (STRNEQ(cfg->nbdTLSx509certdir, SYSCONFDIR "/pki/qemu") &&
+    if (cfg->nbdTLSx509certdir &&
         !virFileExists(cfg->nbdTLSx509certdir)) {
         virReportError(VIR_ERR_CONF_SYNTAX,
                        _("nbd_tls_x509_cert_dir directory '%s' does not exist"),
@@ -1060,6 +974,53 @@ virQEMUDriverConfigSetDefaults(virQEMUDriverConfigPtr cfg)
 {
     int ret = -1;
 
+#define SET_TLS_SECRET_UUID_DEFAULT(val) \
+    do { \
+        if (!cfg->val## TLSx509certdir && \
+            !cfg->val## TLSx509secretUUID && \
+            cfg->defaultTLSx509secretUUID) { \
+            if (VIR_STRDUP(cfg->val## TLSx509secretUUID, \
+                           cfg->defaultTLSx509secretUUID) < 0) \
+                goto cleanup; \
+        } \
+    } while (0)
+
+    SET_TLS_SECRET_UUID_DEFAULT(chardev);
+    SET_TLS_SECRET_UUID_DEFAULT(migrate);
+
+#undef SET_TLS_SECRET_UUID_DEFAULT
+
+    /*
+     * If a "SYSCONFDIR" + "pki/libvirt-<val>" exists, then assume someone
+     * has created a val specific area to place service specific certificates.
+     *
+     * If the service specific directory doesn't exist, 'assume' that the
+     * user has created and populated the "SYSCONFDIR" + "pki/libvirt-default".
+     */
+#define SET_TLS_X509_CERT_DEFAULT(val) \
+    do { \
+        if (cfg->val ## TLSx509certdir) \
+            break; \
+        if (virFileExists(SYSCONFDIR "/pki/libvirt-"#val)) { \
+            if (VIR_STRDUP(cfg->val ## TLSx509certdir, \
+                           SYSCONFDIR "/pki/libvirt-"#val) < 0) \
+                goto cleanup; \
+        } else { \
+            if (VIR_STRDUP(cfg->val ## TLSx509certdir, \
+                           cfg->defaultTLSx509certdir) < 0) \
+                goto cleanup; \
+        } \
+    } while (0)
+
+    SET_TLS_X509_CERT_DEFAULT(vnc);
+    SET_TLS_X509_CERT_DEFAULT(spice);
+    SET_TLS_X509_CERT_DEFAULT(chardev);
+    SET_TLS_X509_CERT_DEFAULT(migrate);
+    SET_TLS_X509_CERT_DEFAULT(vxhs);
+    SET_TLS_X509_CERT_DEFAULT(nbd);
+
+#undef SET_TLS_X509_CERT_DEFAULT
+
 #define SET_TLS_VERIFY_DEFAULT(val) \
     do { \
         if (!cfg->val## TLSx509verifyPresent) \
@@ -1073,6 +1034,7 @@ virQEMUDriverConfigSetDefaults(virQEMUDriverConfigPtr cfg)
 #undef SET_TLS_VERIFY_DEFAULT
 
     ret = 0;
+ cleanup:
     return ret;
 }
 
-- 
2.20.1


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]