[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: [libvirt][RFC PATCH] add a new 'default' option for attribute mode in numatune




> -----Original Message-----
> From: Martin Kletzander <mkletzan redhat com>
> Sent: Monday, August 17, 2020 4:58 PM
> To: Zhong, Luyao <luyao zhong intel com>
> Cc: libvir-list redhat com; Zang, Rui <rui zang intel com>; Michal Privoznik
> <mprivozn redhat com>
> Subject: Re: [libvirt][RFC PATCH] add a new 'default' option for attribute mode
> in numatune
> 
> On Tue, Aug 11, 2020 at 04:39:42PM +0800, Zhong, Luyao wrote:
> >
> >
> >On 8/7/2020 4:24 PM, Martin Kletzander wrote:
> >> On Fri, Aug 07, 2020 at 01:27:59PM +0800, Zhong, Luyao wrote:
> >>>
> >>>
> >>> On 8/3/2020 7:00 PM, Martin Kletzander wrote:
> >>>> On Mon, Aug 03, 2020 at 05:31:56PM +0800, Luyao Zhong wrote:
> >>>>> Hi Libvirt experts,
> >>>>>
> >>>>> I would like enhence the numatune snippet configuration. Given a
> >>>>> example snippet:
> >>>>>
> >>>>> <domain>
> >>>>>  ...
> >>>>>  <numatune>
> >>>>>    <memory mode="strict" nodeset="1-4,^3"/>  ÂÂ
> >>>>> <memnode cellid="0" mode="strict" nodeset="1"/>    <memnode
> >>>>> cellid="2" mode="preferred" nodeset="2"/>  </numatune>  ...
> >>>>> </domain>
> >>>>>
> >>>>> Currently, attribute mode is either 'interleave', 'strict', or
> >>>>> 'preferred', I propose to add a new 'default'  option. I give
> >>>>> the reason as following.
> >>>>>
> >>>>> Presume we are using cgroups v1, Libvirt sets cpuset.mems for all
> >>>>> vcpu threads according to 'nodeset' in memory element. And
> >>>>> translate the memnode element to qemu config options (--object
> >>>>> memory-backend-ram) for per numa cell, which invoking mbind()
> >>>>> system call at the end.[1]
> >>>>>
> >>>>> But what if we want using default memory policy and request each
> >>>>> guest numa cell pinned to different host memory nodes? We can't
> >>>>> use mbind via qemu config options, because (I quoto here) "For
> >>>>> MPOL_DEFAULT, the nodemask and maxnode arguments must be specify
> >>>>> the empty set of nodes." [2]
> >>>>>
> >>>>> So my solution is introducing a new 'default' option for attribute
> >>>>> mode. e.g.
> >>>>>
> >>>>> <domain>
> >>>>>  ...
> >>>>>  <numatune>
> >>>>>    <memory mode="default" nodeset="1-2"/>    <memnode
> >>>>> cellid="0" mode="default" nodeset="1"/>    <memnode
> >>>>> cellid="1" mode="default" nodeset="2"/>  </numatune>  ...
> >>>>> </domain>
> >>>>>
> >>>>> If the mode is 'default', libvirt should avoid generating qemu
> >>>>> command line '--object memory-backend-ram', and invokes cgroups to
> >>>>> set cpuset.mems for per guest numa combining with numa topology
> >>>>> config. Presume the numa topology is :
> >>>>>
> >>>>> <cpu>
> >>>>>  ...
> >>>>>  <numa>
> >>>>>    <cell id='0' cpus='0-3' memory='512000' unit='KiB' /> ÂÂ
> >>>>>   <cell id='1' cpus='4-7' memory='512000' unit='KiB' /> ÂÂ
> >>>>> </numa>  ...
> >>>>> </cpu>
> >>>>>
> >>>>> Then libvirt should set cpuset.mems to '1' for vcpus 0-3, and '2'
> >>>>> for vcpus 4-7.
> >>>>>
> >>>>>
> >>>>> Is this reasonable and feasible? Welcome any comments.
> >>>>>
> >>>>
> >>>> There are couple of problems here.  The memory is not (always)
> >>>> allocated by the vCPU threads.  I also remember it to not be
> >>>> allocated by the process, but in KVM in a way that was not affected
> >>>> by the cgroup settings.
> >>>
> >>> Thanks for your reply. Maybe I don't get what you mean, could you
> >>> give me more context? But what I proposed will have no effect on
> >>> other memory allocation.
> >>>
> >>
> >> Check how cgroups work.  We can set the memory nodes that a process
> >> will allocate from.  However to set the node for the process
> >> (thread) QEMU needs to be started with the vCPU threads already
> >> spawned (albeit stopped).  And for that QEMU already allocates some
> >> memory.  Moreover if extra memory was allocated after we set the
> >> cpuset.mems it is not guaranteed that it will be allocated by the
> >> vCPU in that NUMA cell, it might be done in the emulator instead or
> >> the KVM module in the kernel in which case it might not be accounted
> >> for the process actually causing the allocation (as we've already
> >> seen with Linux).  In all these cases cgroups will not do what you
> >> want them to do.  The last case might be fixed, the first ones are
> >> by default not going to work.
> >>
> >>>> That might be
> >>>> fixed now,
> >>>> however.
> >>>>
> >>>> But basically what we have against is all the reasons why we
> >>>> started using QEMU's command line arguments for all that.
> >>>>
> >>> I'm not proposing use QEMU's command line arguments, on contrary I
> >>> want using cgroups setting to support a new config/requirement. I
> >>> give a solution about if we require default memory policy and memory
> >>> numa pinning.
> >>>
> >>
> >> And I'm suggesting you look at the commit log to see why we *had* to
> >> add these command line arguments, even though I think I managed to
> >> describe most of them above already (except for one that _might_
> >> already be fixed in the kernel).  I understand the git log is huge
> >> and the code around NUMA memory allocation was changing a lot, so I
> >> hope my explanation will be enough.
> >>
> >Thank you for detailed explanation, I think I get it now. We can't
> >guarantee memory allocation matching requirement since there is a time
> >slot before setting cpuset.mems.
> >
> 
> That's one of the things, although this one could be avoided (by setting a global
> cgroup before exec()).
> 
> >>> Thanks,
> >>> Luyao
> >>>> Sorry, but I think it will more likely break rather than fix stuff.
> >>>> Maybe this
> >>>> could be dealt with by a switch in `qemu.conf` with a huge warning
> >>>> above it.
> >>>>
> >>> I'm not trying to fix something, I propose how to support a new
> >>> requirement just like I stated above.
> >>>
> >>
> >> I guess we should take a couple of steps back, I don't get what you
> >> are trying to achieve.  Maybe if you describe your use case it will
> >> be easier to reach a conclusion.
> >>
> >Yeah, I do have a usecase I didn't mention before. It's a feature in
> >kernel but not merged yet, we call it memory tiering.
> >(https://lwn.net/Articles/802544/)
> >
> >If memory tiering is enabled on host, DRAM is top tier memory, and
> >PMEM(persistent memory) is second tier memory, PMEM is shown as numa
> >node without cpu. For short, pages can be migrated between DRAM and
> >PMEM based on DRAM pressure and how cold/hot they are.
> >
> >We could configure multiple memory migrating path. For example, node 0:
> >DRAM, node 1: DRAM, node 2: PMEM, node 3: PMEM we can make 0+2 to a
> >group, and 1+3 to a group. In each group, page is allowed to migrated
> >down(demotion) and up(promotion).
> >
> >If **we want our VMs utilizing memory tiering and with NUMA topology**,
> >we need handle the guest memory mapping to host memory, that means we
> >need bind each guest numa node to a memory nodes group(DRAM node +
> PMEM
> >node) on host. For example, guest node 0 -> host node 0+2.
> >
> >However, only cgroups setting can make the memory tiering work, if we
> >use mbind() system call, demoted pages will never go back to DRAM.
> >That's why I propose to add 'default' option and bypass mbind in QEMU.
> >
> >I hope I make myself understandable. I'll appreciate if you could give
> >some suggestion.
> >
> 
> This comes around every couple of months/years and bites us in the back no
> matter what way we go (every time there is someone who wants it the other
> way).
> That's why I think there could be a way for the user to specify whether they will
> likely move the memory or not and based on that we would specify `host-
> nodes` and `policy` to qemu or not.  I think I even suggested this before (or
> probably delegated it to someone else for a suggestion so that there is more
> discussion), but nobody really replied.
> 
> So what we need, I think, is a way for someone to set a per-domain information
> whether we should bind the memory to nodes in a changeable fashion or not.
> I'd like to have it in as well.  The way we need to do that is, probably, per-
> domain, because adding yet another switch for each place in the XML where we
> can select a NUMA memory binding would be a suicide.  There should also be
> no need for this to be enabled per memory-(module, node), so it should work
> fine.
> 

Thanks for letting us know your vision about this.
>From what I understood, the "changeable fashion" means that the guest numa
cell binding can be changed out of band after initial binding, either by system
admin or the operating system (memory tiering in our case), or whatever the
third party is.  Is that perception correct?
It seems to me mbind() or set_mempolicy() system calls do not offer that
flexibility of changing afterwards. So in case of QEMU/KVM, I can only think
of cgroups.
So to be specific, if we had this additional "memory_binding_changeable"
option specified, we will try to do the guest numa constraining via cgroups
whenever possible. There will probably also be conflicts in options or things
that cgroups can not do. For such cases we'd fail the domain.
If you agree with the direction, I think we can dig deeper to see what will
come out.

Regards,
Zang, Rui


> Ideally we'd discuss it with others, but I think I am only one of a few people
> who dealt with issues in this regard.  Maybe Michal (Cc'd) also dealt with some
> things related to the binding, so maybe he can chime in.
> 
> >regards,
> >Luyao
> >
> >>>> Have a nice day,
> >>>> Martin
> >>>>
> >>>>> Regards,
> >>>>> Luyao
> >>>>>
> >>>>>
> [1]https://github.com/qemu/qemu/blob/f2a1cf9180f63e88bb38ff21c169d
> >>>>> a97c3f2bad5/backends/hostmem.c#L379
> >>>>>
> >>>>>
> >>>>> [2]https://man7.org/linux/man-pages/man2/mbind.2.html
> >>>>>
> >>>>> --
> >>>>> 2.25.1
> >>>>>
> >>>
> >


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]