[PATCH 3/3] docs: kbase: Port 'debuglogs' document from libvirt's wiki
Peter Krempa
pkrempa at redhat.com
Thu Jul 30 10:30:32 UTC 2020
Provide debug log configuration insight in our kbase.
There are two modifications of the document compared to the wiki
version:
1) The link for reporting a bug agains libvirt was modified to use the
gitlab issue tracker.
2) The link to URI specification details is changed to 'https' protocol.
Signed-off-by: Peter Krempa <pkrempa at redhat.com>
---
docs/kbase.rst | 3 +
docs/kbase/debuglogs.rst | 148 +++++++++++++++++++++++++++++++++++++++
docs/kbase/meson.build | 1 +
3 files changed, 152 insertions(+)
create mode 100644 docs/kbase/debuglogs.rst
diff --git a/docs/kbase.rst b/docs/kbase.rst
index 767c08e637..78daaa5989 100644
--- a/docs/kbase.rst
+++ b/docs/kbase.rst
@@ -4,6 +4,9 @@ Knowledge base
.. container:: panel widepanel
+ `Debug logs <kbase/debuglogs.html>`__
+ Configuration of logging and tips on how to file a good bug report.
+
`Disk locking <kbase/locking.html>`__
Ensuring exclusive guest access to disks with
`virtlockd <kbase/locking-lockd.html>`__ or
diff --git a/docs/kbase/debuglogs.rst b/docs/kbase/debuglogs.rst
new file mode 100644
index 0000000000..decc53a69b
--- /dev/null
+++ b/docs/kbase/debuglogs.rst
@@ -0,0 +1,148 @@
+==========
+Debug Logs
+==========
+
+.. contents::
+
+Turning on debug logs
+---------------------
+
+If you `report a bug <https://gitlab.com/libvirt/libvirt/-/issues/new>`__
+against libvirt, in most cases you will be asked to attach debug logs. These
+are bare text files which tracks transition between different states of
+libvirtd, what it has tried to achieve, etc. Because of client -- server schema
+used in libvirt, the logs can be either client or server too. Usually, it's
+server side that matters as nearly all interesting work takes place there.
+Moreover, libvirt catches stderr of all running domains. These can be useful as
+well.
+
+
+How to turn on debug logs for libvirt
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Persistent setting
+^^^^^^^^^^^^^^^^^^
+
+The daemon configuration files location is dependent on `connection
+URI <https://libvirt.org/uri.html>`__. For ``qemu:///system``:
+
+
+
+- open ``/etc/libvirt/libvirtd.conf`` in your favourite editor
+- find & replace, or set these variables:
+
+::
+
+ # LEGACY SETTINGS PRIOR LIBVIRT 4.4.0 SEE BELOW! #
+ log_level = 1
+ log_filters="1:qemu 3:remote 4:event 3:util.json 3:rpc"
+ log_outputs="1:file:/var/log/libvirt/libvirtd.log"
+
+::
+
+ # PREFERRED SETTINGS AFTER LIBVIRT 4.4.0 #
+ log_filters="3:remote 4:event 3:util.json 3:rpc 1:*"
+ log_outputs="1:file:/var/log/libvirt/libvirtd.log"
+
+- save and exit
+- restart libvirtd service
+
+::
+
+ systemctl restart libvirtd.service
+
+In the config variables above, we have set logging level to 1 (debug level), set
+some filters (to filter out noise), e.g. from rpc only warnings (=level 3) and
+above will be reported. The logs are saved into
+``/var/log/libvirt/libvirtd.log``. Since libvirt **4.4.0** log filters support
+shell globbing, therefore the usage of ``log_level`` is considered deprecated in
+favour of pure usage of ``log_filters``.
+
+In case you want to get the client logs, you need to set this environment
+variable:
+
+::
+
+ export LIBVIRT_LOG_OUTPUTS="1:file:/tmp/libvirt_client.log"
+
+
+However, when you are using the session mode ``qemu:///session`` or you run the
+``libvirtd`` as unprivileged user you will find configuration file under
+``$XDG_CONFIG_HOME/libvirt/libvirt.conf``.
+
+Runtime setting
+^^^^^^^^^^^^^^^
+
+Debugging anomalies can be very painful, especially when trying to reproduce it
+after the daemon restarts, since the new session can make the anomaly
+"disappear". Therefore, it's possible to enable the debug logs during runtime
+using libvirt administration API. To use it conveniently, there's a virt-admin
+client provided by the libvirt-admin package. Use the package manager provided
+by your distribution to install this package. Once you have it installed, run
+the following as root to see the set of log filters currently being active:
+
+::
+
+ # virt-admin daemon-log-filters
+ Logging filters: 3:remote 4:util.json 4:rpc
+
+In order to change this set, run the same command as root, this time with your
+own set of filters:
+
+::
+
+ ## LEGACY APPROACH ENUMERATING ALL THE DESIRED MODULES ##
+ # virt-admin daemon-log-filters "1:util 1:libvirt 1:storage 1:network 1:nodedev 1:qemu"
+
+::
+
+ ## CURRENT APPROACH USING SHELL GLOBBING ##
+ # virt-admin daemon-log-filters "3:remote 4:util.json 4:rpc 1:*"
+
+Analogically, the same procedure can be performed with log outputs:
+
+::
+
+ # virt-admin daemon-log-outputs
+ Logging outputs: 3:syslog:libvirtd
+ # virt-admin daemon-log-outputs "1:file:/var/log/libvirt/libvirtd.log"
+
+NOTE: It's always good practice to return the settings to the original state
+once you're finished debugging, just remember to save the original sets of
+filters and outputs and restore them at the end the same way as described above.
+
+Removing filters and outputs
+''''''''''''''''''''''''''''
+
+It's also possible to remove all the filters and produce an enormous log file,
+but it is not recommended since some of libvirt's modules can produce a large
+amount of noise. However, should you really want to do this, you can specify an
+empty set of filters:
+
+::
+
+ # virt-admin daemon-log-filters ""
+ Logging filters:
+
+The situation is a bit different with outputs, since libvirt always has to log
+somewhere and resetting the outputs to an empty set will restore the default
+setting which depends on the host configuration, *journald* in our case:
+
+::
+
+ # virt-admin daemon-log-outputs
+ Logging outputs: 1:file:/var/log/libvirt/libvirtd.log
+ # virt-admin daemon-log-outputs ""
+ Logging outputs: 2:journald
+
+What to attach?
+~~~~~~~~~~~~~~~
+
+Now you should go and reproduce the bug. Once you're finished, attach:
+
+- ``/var/log/libvirt/libvirtd.log`` or whatever path you set for the daemon
+ logs.
+- If the problem is related to a domain attach
+ ``/var/log/libvirt/qemu/$dom.log`` then. Or substitute ``qemu`` with whatever
+ hypervisor you are using.
+- If you are asked for client logs, ``/tmp/libvirt_client.log``.
diff --git a/docs/kbase/meson.build b/docs/kbase/meson.build
index f72e426223..d7f254e163 100644
--- a/docs/kbase/meson.build
+++ b/docs/kbase/meson.build
@@ -1,5 +1,6 @@
docs_kbase_files = [
'backing_chains',
+ 'debuglogs',
'domainstatecapture',
'incrementalbackupinternals',
'kvm-realtime',
--
2.26.2
More information about the libvir-list
mailing list