[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[PATCH v3 1/2] qemu: Allow migration over UNIX socket



This allows:

 a) migration without access to network

 b) complete control of the migration stream

 c) easy migration between containerised libvirt daemons on the same host

Resolves: https://bugzilla.redhat.com/1638889

Signed-off-by: Martin Kletzander <mkletzan redhat com>
---
 docs/manpages/virsh.rst          |  13 ++-
 docs/migration.html.in           |  33 ++++++++
 src/qemu/qemu_driver.c           |  22 ++++-
 src/qemu/qemu_migration.c        | 138 +++++++++++++++++++++++--------
 src/qemu/qemu_migration_params.c |   9 ++
 src/qemu/qemu_migration_params.h |   3 +
 src/qemu/qemu_monitor.c          |  15 ++++
 src/qemu/qemu_monitor.h          |   4 +
 8 files changed, 198 insertions(+), 39 deletions(-)

diff --git a/docs/manpages/virsh.rst b/docs/manpages/virsh.rst
index a0d6c3fadda6..ca5acf84cad2 100644
--- a/docs/manpages/virsh.rst
+++ b/docs/manpages/virsh.rst
@@ -3270,6 +3270,14 @@ There are a few scenarios where specifying *migrateuri* may help:
   might be specified to choose a specific port number outside the default range in
   order to comply with local firewall policies.
 
+* The *desturi* uses UNIX transport method.  In this advanced case libvirt
+  should not guess a *migrateuri* and it should be specified using
+  UNIX socket path URI:
+
+.. code-block::
+
+      unix:///path/to/socket
+
 See `https://libvirt.org/migration.html#uris <https://libvirt.org/migration.html#uris>`_ for more details on
 migration URIs.
 
@@ -3296,8 +3304,9 @@ specific parameters separated by '&'. Currently recognized parameters are
 Optional *listen-address* sets the listen address that hypervisor on the
 destination side should bind to for incoming migration. Both IPv4 and IPv6
 addresses are accepted as well as hostnames (the resolving is done on
-destination). Some hypervisors do not support this feature and will return an
-error if this parameter is used.
+destination).  Some hypervisors do not support specifying the listen address and
+will return an error if this parameter is used. This parameter cannot be used if
+*desturi* uses UNIX transport method.
 
 Optional *disks-port* sets the port that hypervisor on destination side should
 bind to for incoming disks traffic. Currently it is supported only by QEMU.
diff --git a/docs/migration.html.in b/docs/migration.html.in
index e95ee9de6f1b..162c202227b9 100644
--- a/docs/migration.html.in
+++ b/docs/migration.html.in
@@ -201,6 +201,9 @@
         numbers. In the latter case the management application may wish
         to choose a specific port number outside the default range in order
         to comply with local firewall policies.</li>
+      <li>The second URI uses UNIX transport method.  In this advanced case
+        libvirt should not guess a *migrateuri* and it should be specified using
+        UNIX socket path URI: <code>unix:///path/to/socket</code>.</li>
     </ol>
 
     <h2><a id="config">Configuration file handling</a></h2>
@@ -628,5 +631,35 @@ virsh migrate --p2p --tunnelled web1 qemu+ssh://desthost/system qemu+ssh://10.0.
       Supported by QEMU driver
     </p>
 
+
+    <h3><a id="scenariounixsocket">Migration using only UNIX sockets</a></h3>
+
+    <p>
+      In niche scenarios where libvirt daemon does not have access to the
+      network (e.g. running in a restricted container on a host that has
+      accessible network), when a management application wants to have complete
+      control over the transfer or when migrating between two containers on the
+      same host all the communication can be done using UNIX sockets.  This
+      includes connecting to non-standard socket path for the destination
+      daemon, using UNIX sockets for hypervisor's communication or for the NBD
+      data transfer.  All of that can be used with both peer2peer and direct
+      migration options.
+    </p>
+
+    <p>
+      Example using <code>/tmp/migdir</code> as a directory representing the
+      same path visible from both libvirt daemons.  That can be achieved by
+      bind-mounting the same directory to different containers running separate
+      daemons or forwarding connections to these sockets manually
+      (using <code>socat</code>, <code>netcat</code> or a custom piece of
+      software):
+    <pre>
+virsh migrate web1 [--p2p] --copy-storage-all 'qemu+unix:///system?socket=/tmp/migdir/test-sock-driver' 'unix:///tmp/migdir/test-sock-qemu' --disks-uri unix:///tmp/migdir/test-sock-nbd
+    </pre>
+
+    <p>
+      Supported by QEMU driver
+    </p>
+
   </body>
 </html>
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 80c56fec603e..ce72e1021d16 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -11480,7 +11480,7 @@ qemuDomainMigratePrepare3Params(virConnectPtr dconn,
     const char *dom_xml = NULL;
     const char *dname = NULL;
     const char *uri_in = NULL;
-    const char *listenAddress = cfg->migrationAddress;
+    const char *listenAddress = NULL;
     int nbdPort = 0;
     int nmigrate_disks;
     g_autofree const char **migrate_disks = NULL;
@@ -11530,6 +11530,17 @@ qemuDomainMigratePrepare3Params(virConnectPtr dconn,
         return -1;
     }
 
+    if (listenAddress) {
+        if (uri_in && STRPREFIX(uri_in, "unix:")) {
+            virReportError(VIR_ERR_INVALID_ARG, "%s",
+                           _("Usage of listen-address is forbidden when "
+                             "migration URI uses UNIX transport method"));
+            return -1;
+        }
+    } else {
+        listenAddress = cfg->migrationAddress;
+    }
+
     if (flags & VIR_MIGRATE_TUNNELLED) {
         /* this is a logical error; we never should have gotten here with
          * VIR_MIGRATE_TUNNELLED set
@@ -11771,6 +11782,15 @@ qemuDomainMigratePerform3Params(virDomainPtr dom,
         goto cleanup;
     }
 
+    if (listenAddress) {
+        if (uri && STRPREFIX(uri, "unix:")) {
+            virReportError(VIR_ERR_INVALID_ARG, "%s",
+                           _("Usage of listen-address is forbidden when "
+                             "migration URI uses UNIX transport method"));
+            return -1;
+        }
+    }
+
     nmigrate_disks = virTypedParamsGetStringList(params, nparams,
                                                  VIR_MIGRATE_PARAM_MIGRATE_DISKS,
                                                  &migrate_disks);
diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c
index f3870b3c0b9d..f862942f87f9 100644
--- a/src/qemu/qemu_migration.c
+++ b/src/qemu/qemu_migration.c
@@ -2411,6 +2411,8 @@ qemuMigrationDstPrepare(virDomainObjPtr vm,
 
     if (tunnel) {
         migrateFrom = g_strdup("stdio");
+    } else if (g_strcmp0(protocol, "unix") == 0) {
+        migrateFrom = g_strdup_printf("%s:%s", protocol, listenAddress);
     } else {
         bool encloseAddress = false;
         bool hostIPv6Capable = false;
@@ -2995,34 +2997,40 @@ qemuMigrationDstPrepareDirect(virQEMUDriverPtr driver,
         }
 
         if (STRNEQ(uri->scheme, "tcp") &&
-            STRNEQ(uri->scheme, "rdma")) {
+            STRNEQ(uri->scheme, "rdma") &&
+            STRNEQ(uri->scheme, "unix")) {
             virReportError(VIR_ERR_ARGUMENT_UNSUPPORTED,
                            _("unsupported scheme %s in migration URI %s"),
                            uri->scheme, uri_in);
             goto cleanup;
         }
 
-        if (uri->server == NULL) {
-            virReportError(VIR_ERR_INVALID_ARG, _("missing host in migration"
-                                                  " URI: %s"), uri_in);
-            goto cleanup;
-        }
-
-        if (uri->port == 0) {
-            if (virPortAllocatorAcquire(driver->migrationPorts, &port) < 0)
+        if (STREQ(uri->scheme, "unix")) {
+            autoPort = false;
+            listenAddress = uri->path;
+        } else {
+            if (uri->server == NULL) {
+                virReportError(VIR_ERR_INVALID_ARG, _("missing host in migration"
+                                                      " URI: %s"), uri_in);
                 goto cleanup;
+            }
 
-            /* Send well-formed URI only if uri_in was well-formed */
-            if (well_formed_uri) {
-                uri->port = port;
-                if (!(*uri_out = virURIFormat(uri)))
+            if (uri->port == 0) {
+                if (virPortAllocatorAcquire(driver->migrationPorts, &port) < 0)
                     goto cleanup;
+
+                /* Send well-formed URI only if uri_in was well-formed */
+                if (well_formed_uri) {
+                    uri->port = port;
+                    if (!(*uri_out = virURIFormat(uri)))
+                        goto cleanup;
+                } else {
+                    *uri_out = g_strdup_printf("%s:%d", uri_in, port);
+                }
             } else {
-                *uri_out = g_strdup_printf("%s:%d", uri_in, port);
+                port = uri->port;
+                autoPort = false;
             }
-        } else {
-            port = uri->port;
-            autoPort = false;
         }
     }
 
@@ -3237,6 +3245,8 @@ qemuMigrationSrcConfirm(virQEMUDriverPtr driver,
 enum qemuMigrationDestinationType {
     MIGRATION_DEST_HOST,
     MIGRATION_DEST_CONNECT_HOST,
+    MIGRATION_DEST_SOCKET,
+    MIGRATION_DEST_CONNECT_SOCKET,
     MIGRATION_DEST_FD,
 };
 
@@ -3256,6 +3266,10 @@ struct _qemuMigrationSpec {
             int port;
         } host;
 
+        struct {
+            const char *path;
+        } socket;
+
         struct {
             int qemu;
             int local;
@@ -3470,13 +3484,30 @@ qemuMigrationSrcConnect(virQEMUDriverPtr driver,
 
     if (qemuSecuritySetSocketLabel(driver->securityManager, vm->def) < 0)
         goto cleanup;
-    port = g_strdup_printf("%d", spec->dest.host.port);
-    if (virNetSocketNewConnectTCP(spec->dest.host.name,
-                                  port,
-                                  AF_UNSPEC,
-                                  &sock) == 0) {
-        fd_qemu = virNetSocketDupFD(sock, true);
-        virObjectUnref(sock);
+
+    switch (spec->destType) {
+    case MIGRATION_DEST_CONNECT_HOST:
+        port = g_strdup_printf("%d", spec->dest.host.port);
+        if (virNetSocketNewConnectTCP(spec->dest.host.name,
+                                      port,
+                                      AF_UNSPEC,
+                                      &sock) == 0) {
+            fd_qemu = virNetSocketDupFD(sock, true);
+            virObjectUnref(sock);
+        }
+        break;
+    case MIGRATION_DEST_CONNECT_SOCKET:
+        if (virNetSocketNewConnectUNIX(spec->dest.socket.path,
+                                       false, NULL,
+                                       &sock) == 0) {
+            fd_qemu = virNetSocketDupFD(sock, true);
+            virObjectUnref(sock);
+        }
+        break;
+    case MIGRATION_DEST_HOST:
+    case MIGRATION_DEST_SOCKET:
+    case MIGRATION_DEST_FD:
+        break;
     }
 
     spec->destType = MIGRATION_DEST_FD;
@@ -3684,6 +3715,14 @@ qemuMigrationSrcRun(virQEMUDriverPtr driver,
     if (migrate_flags & (QEMU_MONITOR_MIGRATE_NON_SHARED_DISK |
                          QEMU_MONITOR_MIGRATE_NON_SHARED_INC)) {
         if (mig->nbd) {
+            const char *host = "";
+
+            if (spec->destType == MIGRATION_DEST_HOST ||
+                spec->destType == MIGRATION_DEST_CONNECT_HOST) {
+                host = spec->dest.host.name;
+            }
+
+
             /* Currently libvirt does not support setting up of the NBD
              * non-shared storage migration with TLS. As we need to honour the
              * VIR_MIGRATE_TLS flag, we need to reject such migration until
@@ -3697,7 +3736,7 @@ qemuMigrationSrcRun(virQEMUDriverPtr driver,
 
             /* This will update migrate_flags on success */
             if (qemuMigrationSrcNBDStorageCopy(driver, vm, mig,
-                                               spec->dest.host.name,
+                                               host,
                                                migrate_speed,
                                                &migrate_flags,
                                                nmigrate_disks,
@@ -3745,7 +3784,8 @@ qemuMigrationSrcRun(virQEMUDriverPtr driver,
         goto exit_monitor;
 
     /* connect to the destination qemu if needed */
-    if (spec->destType == MIGRATION_DEST_CONNECT_HOST &&
+    if ((spec->destType == MIGRATION_DEST_CONNECT_HOST ||
+         spec->destType == MIGRATION_DEST_CONNECT_SOCKET) &&
         qemuMigrationSrcConnect(driver, vm, spec) < 0) {
         goto exit_monitor;
     }
@@ -3767,7 +3807,14 @@ qemuMigrationSrcRun(virQEMUDriverPtr driver,
                                       spec->dest.host.port);
         break;
 
+    case MIGRATION_DEST_SOCKET:
+        qemuSecurityDomainSetPathLabel(driver, vm, spec->dest.socket.path, false);
+        rc = qemuMonitorMigrateToSocket(priv->mon, migrate_flags,
+                                        spec->dest.socket.path);
+        break;
+
     case MIGRATION_DEST_CONNECT_HOST:
+    case MIGRATION_DEST_CONNECT_SOCKET:
         /* handled above and transformed into MIGRATION_DEST_FD */
         break;
 
@@ -3983,16 +4030,35 @@ qemuMigrationSrcPerformNative(virQEMUDriverPtr driver,
         }
     }
 
-    /* RDMA and multi-fd migration requires QEMU to connect to the destination
-     * itself.
-     */
-    if (STREQ(uribits->scheme, "rdma") || (flags & VIR_MIGRATE_PARALLEL))
-        spec.destType = MIGRATION_DEST_HOST;
-    else
-        spec.destType = MIGRATION_DEST_CONNECT_HOST;
-    spec.dest.host.protocol = uribits->scheme;
-    spec.dest.host.name = uribits->server;
-    spec.dest.host.port = uribits->port;
+    if (STREQ(uribits->scheme, "unix")) {
+        if ((flags & VIR_MIGRATE_TLS) &&
+            !qemuMigrationParamsTLSHostnameIsSet(migParams)) {
+            virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
+                           _("Explicit destination hostname is required "
+                             "for TLS migration over UNIX socket"));
+            return -1;
+        }
+
+        if (flags & VIR_MIGRATE_PARALLEL)
+            spec.destType = MIGRATION_DEST_SOCKET;
+        else
+            spec.destType = MIGRATION_DEST_CONNECT_SOCKET;
+
+        spec.dest.socket.path = uribits->path;
+    } else {
+        /* RDMA and multi-fd migration requires QEMU to connect to the destination
+         * itself.
+         */
+        if (STREQ(uribits->scheme, "rdma") || (flags & VIR_MIGRATE_PARALLEL))
+            spec.destType = MIGRATION_DEST_HOST;
+        else
+            spec.destType = MIGRATION_DEST_CONNECT_HOST;
+
+        spec.dest.host.protocol = uribits->scheme;
+        spec.dest.host.name = uribits->server;
+        spec.dest.host.port = uribits->port;
+    }
+
     spec.fwdType = MIGRATION_FWD_DIRECT;
 
     ret = qemuMigrationSrcRun(driver, vm, persist_xml, cookiein, cookieinlen, cookieout,
diff --git a/src/qemu/qemu_migration_params.c b/src/qemu/qemu_migration_params.c
index 231a8a2ee83e..5fde915963ec 100644
--- a/src/qemu/qemu_migration_params.c
+++ b/src/qemu/qemu_migration_params.c
@@ -1008,6 +1008,15 @@ qemuMigrationParamsDisableTLS(virDomainObjPtr vm,
 }
 
 
+bool
+qemuMigrationParamsTLSHostnameIsSet(qemuMigrationParamsPtr migParams)
+{
+    int param = QEMU_MIGRATION_PARAM_TLS_HOSTNAME;
+    return (migParams->params[param].set &&
+            STRNEQ(migParams->params[param].value.s, ""));
+}
+
+
 /* qemuMigrationParamsResetTLS
  * @driver: pointer to qemu driver
  * @vm: domain object
diff --git a/src/qemu/qemu_migration_params.h b/src/qemu/qemu_migration_params.h
index 9aea24725f0a..9876101bfc4a 100644
--- a/src/qemu/qemu_migration_params.h
+++ b/src/qemu/qemu_migration_params.h
@@ -113,6 +113,9 @@ int
 qemuMigrationParamsDisableTLS(virDomainObjPtr vm,
                               qemuMigrationParamsPtr migParams);
 
+bool
+qemuMigrationParamsTLSHostnameIsSet(qemuMigrationParamsPtr migParams);
+
 int
 qemuMigrationParamsFetch(virQEMUDriverPtr driver,
                          virDomainObjPtr vm,
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index 718ac50c0898..ab3bcc761e9a 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -2555,6 +2555,21 @@ qemuMonitorMigrateToHost(qemuMonitorPtr mon,
 }
 
 
+int
+qemuMonitorMigrateToSocket(qemuMonitorPtr mon,
+                           unsigned int flags,
+                           const char *socketPath)
+{
+    g_autofree char *uri = g_strdup_printf("unix:%s", socketPath);
+
+    VIR_DEBUG("socketPath=%s flags=0x%x", socketPath, flags);
+
+    QEMU_CHECK_MONITOR(mon);
+
+    return qemuMonitorJSONMigrate(mon, flags, uri);
+}
+
+
 int
 qemuMonitorMigrateCancel(qemuMonitorPtr mon)
 {
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index d20a15c202db..3e4ef7e821a6 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -853,6 +853,10 @@ int qemuMonitorMigrateToHost(qemuMonitorPtr mon,
                              const char *hostname,
                              int port);
 
+int qemuMonitorMigrateToSocket(qemuMonitorPtr mon,
+                               unsigned int flags,
+                               const char *socketPath);
+
 int qemuMonitorMigrateCancel(qemuMonitorPtr mon);
 
 int qemuMonitorGetDumpGuestMemoryCapability(qemuMonitorPtr mon,
-- 
2.28.0


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]