[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Libvirt-cim] Problem in running libvirt-cim test suite



srinivas k wrote:

Hi Deepthi,

 Command output is.

root luser-desktop:~# virsh net-list --all
Connecting to uri: xen:///
Name                 State      Autostart
-----------------------------------------
default              inactive no


Thanks,
Seenu


Hi Seenu,

Which version of libvirt are you using?

cimtest is attempting to setup a virtual network for all of the guests to use while the suite runs.

Are you running cimtest as root? Also, if you run cimtest with the -d option, do you see any additional debug?

One thing to try is to make sure you can define and start a network pool using virsh. You can do the following:

  sudo virsh net-start default

This will start the existing network you have. This should succeed without any errors.

If that works, you can put the following XML in a file:

<?xml version="1.0" ?>
<network>
 <name>cimtest-networkpool</name>
 <forward/>
 <bridge forwardDelay="0" name="testbridge" stp="on"/>
 <ip address="192.168.122.1" netmask="255.255.255.0">
  <dhcp>
   <range end="192.168.122.254" start="192.168.122.2"/>
  </dhcp>
 </ip>
</network>

Then call the following commands:

  sudo virsh net-create filename

If this is successful, you can destroy the network pool using:

  sudo virsh net-destroy cimtest-networkpool

If all of this works for you, you can try running cimtest again. Let us know if you hit any errors.

--
Kaitlin Rupert
IBM Linux Technology Center
kaitlin linux vnet ibm com


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]