[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [libvirt-users] unable to ping from guests in virbr0 to guests in virbr1 network



On Mon, Nov 19, 2012 at 12:09:53PM +0530, mallapadi niranjan wrote:
> Hi all,
> 
> I have 3 guests (2-RHEL4 and 1 RHEL6) and have some issues regarding
> networking between them. The 2 RHEL4 system's use default bridge virbr0 and
> get ip's of range 192.168.122.0/24  (192.168.122.207, 192.168.122.167)
> 
> I created another bridge (virbr1) with NAT forwarding (no dhcp). The
> network i choose was 192.168.100.0/24. And the third system (RHEL6) was
> assigned static ip-addres 192.168.100.101,
> 
> >From the RHEL6 system which uses virbr1 is able to ping systems in
> 192.168.122.0/24 series , but  guest systems in 192.168.122.0/24 are not
> able to ping RHEL6 system (in virbr1) network.
> 
> >From the RHEL4 guests i am able to ping the gateway ip's (192.168.122.1,
> 192.168.100.1) , but not the RHEL6 system
> 

That's correct behavior, because the networks are in different ranges
they need to have a way to talk to each other, either via a gateway or
fixed routing.

btw, Why do you need your hosts in separate networks?

You may want to check this page on libvirt networking.
http://wiki.libvirt.org/page/VirtualNetworking

regards.

-- 
Rudy Godoy
http://stone-head.org


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]