[PATCH 1/1] NetLabel: add audit support for configuration changes

James Morris jmorris at namei.org
Fri Sep 29 14:13:29 UTC 2006


Dave,

Looks like this patch needs to be reverted until these issues are 
resolved.



On Fri, 29 Sep 2006, Steve Grubb wrote:

> On Thursday 28 September 2006 14:03, paul.moore at hp.com wrote:
> > This patch adds audit support to NetLabel, including six new audit message
> > types shown below.
> >
> >  #define AUDIT_MAC_UNLBL_ACCEPT 1406
> >  #define AUDIT_MAC_UNLBL_DENY   1407
> >  #define AUDIT_MAC_CIPSOV4_ADD  1408
> >  #define AUDIT_MAC_CIPSOV4_DEL  1409
> >  #define AUDIT_MAC_MAP_ADD      1410
> >  #define AUDIT_MAC_MAP_DEL      1411
> >
> > Please consider this for inclusion into 2.6.19.
> >
> > Signed-off-by: Paul Moore <paul.moore at hp.com>
> > ---
> >  include/linux/audit.h              |    6 ++
> >  include/net/cipso_ipv4.h           |    5 +-
> >  include/net/netlabel.h             |    2
> >  net/ipv4/cipso_ipv4.c              |    8 ++-
> >  net/netlabel/netlabel_cipso_v4.c   |   43 +++++++++++++----
> >  net/netlabel/netlabel_domainhash.c |   54 +++++++++++++++++++--
> >  net/netlabel/netlabel_domainhash.h |    6 +-
> >  net/netlabel/netlabel_mgmt.c       |   14 +++--
> >  net/netlabel/netlabel_unlabeled.c  |   36 ++++++++++++--
> >  net/netlabel/netlabel_user.c       |   91
> > +++++++++++++++++++++++++++++++++++++ net/netlabel/netlabel_user.h       | 
> >   6 ++
> >  11 files changed, 235 insertions(+), 36 deletions(-)
> >
> > Index: net-2.6/include/linux/audit.h
> > ===================================================================
> > --- net-2.6.orig/include/linux/audit.h
> > +++ net-2.6/include/linux/audit.h
> > @@ -95,6 +95,12 @@
> >  #define AUDIT_MAC_POLICY_LOAD	1403	/* Policy file load */
> >  #define AUDIT_MAC_STATUS	1404	/* Changed enforcing,permissive,off */
> >  #define AUDIT_MAC_CONFIG_CHANGE	1405	/* Changes to booleans */
> > +#define AUDIT_MAC_UNLBL_ACCEPT	1406	/* NetLabel: allow unlabeled traffic */ 
> > +#define AUDIT_MAC_UNLBL_DENY	1407	/* NetLabel: deny unlabeled traffic */
> 
> Please drop the use of DENY per comments later down.
> 
> > +#define AUDIT_MAC_CIPSOV4_ADD	1408	/* NetLabel: add CIPSOv4 DOI entry */
> > +#define AUDIT_MAC_CIPSOV4_DEL	1409	/* NetLabel: del CIPSOv4 DOI entry */
> > +#define AUDIT_MAC_MAP_ADD	1410	/* NetLabel: add LSM domain mapping */  
> > +#define AUDIT_MAC_MAP_DEL	1411	/* NetLabel: del LSM domain mapping */
> >
> >  #define AUDIT_FIRST_KERN_ANOM_MSG   1700
> >  #define AUDIT_LAST_KERN_ANOM_MSG    1799
> > Index: net-2.6/include/net/cipso_ipv4.h
> > ===================================================================
> > --- net-2.6.orig/include/net/cipso_ipv4.h
> > +++ net-2.6/include/net/cipso_ipv4.h
> > @@ -128,7 +128,9 @@ extern int cipso_v4_rbm_strictvalid;
> >
> >  #ifdef CONFIG_NETLABEL
> >  int cipso_v4_doi_add(struct cipso_v4_doi *doi_def);
> > -int cipso_v4_doi_remove(u32 doi, void (*callback) (struct rcu_head *
> > head)); +int cipso_v4_doi_remove(u32 doi,
> > +			u32 audit_secid,
> > +			void (*callback) (struct rcu_head * head));
> >  struct cipso_v4_doi *cipso_v4_doi_getdef(u32 doi);
> >  int cipso_v4_doi_walk(u32 *skip_cnt,
> >  		     int (*callback) (struct cipso_v4_doi *doi_def, void *arg),
> > @@ -143,6 +145,7 @@ static inline int cipso_v4_doi_add(struc
> >  }
> >
> >  static inline int cipso_v4_doi_remove(u32 doi,
> > +				    u32 audit_secid,
> >  				    void (*callback) (struct rcu_head * head))
> >  {
> >  	return 0;
> > Index: net-2.6/include/net/netlabel.h
> > ===================================================================
> > --- net-2.6.orig/include/net/netlabel.h
> > +++ net-2.6/include/net/netlabel.h
> > @@ -96,7 +96,7 @@
> >  struct netlbl_dom_map;
> >
> >  /* Domain mapping operations */
> > -int netlbl_domhsh_remove(const char *domain);
> > +int netlbl_domhsh_remove(const char *domain, u32 audit_secid);
> >
> >  /* LSM security attributes */
> >  struct netlbl_lsm_cache {
> > Index: net-2.6/net/ipv4/cipso_ipv4.c
> > ===================================================================
> > --- net-2.6.orig/net/ipv4/cipso_ipv4.c
> > +++ net-2.6/net/ipv4/cipso_ipv4.c
> > @@ -474,6 +474,7 @@ doi_add_failure_rlock:
> >  /**
> >   * cipso_v4_doi_remove - Remove an existing DOI from the CIPSO protocol
> > engine * @doi: the DOI value
> > + * @audit_secid: the LSM secid to use in the audit message
> >   * @callback: the DOI cleanup/free callback
> >   *
> >   * Description:
> > @@ -483,7 +484,9 @@ doi_add_failure_rlock:
> >   * success and negative values on failure.
> >   *
> >   */
> > -int cipso_v4_doi_remove(u32 doi, void (*callback) (struct rcu_head *
> > head)) +int cipso_v4_doi_remove(u32 doi,
> > +			u32 audit_secid,
> > +			void (*callback) (struct rcu_head * head))
> >  {
> >  	struct cipso_v4_doi *doi_def;
> >  	struct cipso_v4_domhsh_entry *dom_iter;
> > @@ -502,7 +505,8 @@ int cipso_v4_doi_remove(u32 doi, void (*
> >  		spin_unlock(&cipso_v4_doi_list_lock);
> >  		list_for_each_entry_rcu(dom_iter, &doi_def->dom_list, list)
> >  			if (dom_iter->valid)
> > -				netlbl_domhsh_remove(dom_iter->domain);
> > +				netlbl_domhsh_remove(dom_iter->domain,
> > +						     audit_secid);
> >  		cipso_v4_cache_invalidate();
> >  		rcu_read_unlock();
> >
> > Index: net-2.6/net/netlabel/netlabel_cipso_v4.c
> > ===================================================================
> > --- net-2.6.orig/net/netlabel/netlabel_cipso_v4.c
> > +++ net-2.6/net/netlabel/netlabel_cipso_v4.c
> > @@ -32,6 +32,7 @@
> >  #include <linux/socket.h>
> >  #include <linux/string.h>
> >  #include <linux/skbuff.h>
> > +#include <linux/audit.h>
> >  #include <net/sock.h>
> >  #include <net/netlink.h>
> >  #include <net/genetlink.h>
> > @@ -162,8 +163,7 @@ static int netlbl_cipsov4_add_std(struct
> >  	int nla_a_rem;
> >  	int nla_b_rem;
> >
> > -	if (!info->attrs[NLBL_CIPSOV4_A_DOI] ||
> > -	    !info->attrs[NLBL_CIPSOV4_A_TAGLST] ||
> > +	if (!info->attrs[NLBL_CIPSOV4_A_TAGLST] ||
> >  	    !info->attrs[NLBL_CIPSOV4_A_MLSLVLLST])
> >  		return -EINVAL;
> >
> > @@ -344,8 +344,7 @@ static int netlbl_cipsov4_add_pass(struc
> >  	int ret_val;
> >  	struct cipso_v4_doi *doi_def = NULL;
> >
> > -	if (!info->attrs[NLBL_CIPSOV4_A_DOI] ||
> > -	    !info->attrs[NLBL_CIPSOV4_A_TAGLST])
> > +	if (!info->attrs[NLBL_CIPSOV4_A_TAGLST])
> >  		return -EINVAL;
> >
> >  	doi_def = kmalloc(sizeof(*doi_def), GFP_KERNEL);
> > @@ -381,21 +380,35 @@ static int netlbl_cipsov4_add(struct sk_
> >
> >  {
> >  	int ret_val = -EINVAL;
> > -	u32 map_type;
> > +	u32 type;
> > +	u32 doi;
> > +	const char *type_str = "(unknown)";
> > +	struct audit_buffer *audit_buf;
> >
> > -	if (!info->attrs[NLBL_CIPSOV4_A_MTYPE])
> > +	if (!info->attrs[NLBL_CIPSOV4_A_DOI] ||
> > +	    !info->attrs[NLBL_CIPSOV4_A_MTYPE])
> >  		return -EINVAL;
> >
> > -	map_type = nla_get_u32(info->attrs[NLBL_CIPSOV4_A_MTYPE]);
> > -	switch (map_type) {
> > +	type = nla_get_u32(info->attrs[NLBL_CIPSOV4_A_MTYPE]);
> > +	switch (type) {
> >  	case CIPSO_V4_MAP_STD:
> > +		type_str = "std";
> >  		ret_val = netlbl_cipsov4_add_std(info);
> >  		break;
> >  	case CIPSO_V4_MAP_PASS:
> > +		type_str = "pass";
> >  		ret_val = netlbl_cipsov4_add_pass(info);
> >  		break;
> >  	}
> >
> > +	if (ret_val == 0) {
> > +		doi = nla_get_u32(info->attrs[NLBL_CIPSOV4_A_DOI]);
> > +		audit_buf = netlbl_audit_start_common(AUDIT_MAC_CIPSOV4_ADD,
> > +						      NETLINK_CB(skb).sid);
> > +		audit_log_format(audit_buf, " doi=%u type=%s", doi, type_str);
> 
> type field is already taken for another purpose, it needs to be renamed.
> 
> > +		audit_log_end(audit_buf);
> > +	}
> 
> Normally, we have a field res= that records whether or not the user was 
> successful in removing the rule. You would probably do something like 
> ret_val==0?1:0 but send a audit event regardless
> 
> > +
> >  	return ret_val;
> >  }
> >
> > @@ -653,11 +666,21 @@ static int netlbl_cipsov4_listall(struct
> >  static int netlbl_cipsov4_remove(struct sk_buff *skb, struct genl_info
> > *info) {
> >  	int ret_val = -EINVAL;
> > -	u32 doi;
> > +	u32 doi = 0;
> > +	struct audit_buffer *audit_buf;
> >
> >  	if (info->attrs[NLBL_CIPSOV4_A_DOI]) {
> >  		doi = nla_get_u32(info->attrs[NLBL_CIPSOV4_A_DOI]);
> > -		ret_val = cipso_v4_doi_remove(doi, netlbl_cipsov4_doi_free);
> > +		ret_val = cipso_v4_doi_remove(doi,
> > +					      NETLINK_CB(skb).sid,
> > +					      netlbl_cipsov4_doi_free);
> > +	}
> > +
> > +	if (ret_val == 0) {
> > +		audit_buf = netlbl_audit_start_common(AUDIT_MAC_CIPSOV4_DEL,
> > +						      NETLINK_CB(skb).sid);
> > +		audit_log_format(audit_buf, " doi=%u", doi);
> > +		audit_log_end(audit_buf);
> >  	}
> 
> Same as above, global comment about res= being recorded no matter what.
> 
> >
> >  	return ret_val;
> > Index: net-2.6/net/netlabel/netlabel_domainhash.c
> > ===================================================================
> > --- net-2.6.orig/net/netlabel/netlabel_domainhash.c
> > +++ net-2.6/net/netlabel/netlabel_domainhash.c
> > @@ -35,12 +35,14 @@
> >  #include <linux/skbuff.h>
> >  #include <linux/spinlock.h>
> >  #include <linux/string.h>
> > +#include <linux/audit.h>
> >  #include <net/netlabel.h>
> >  #include <net/cipso_ipv4.h>
> >  #include <asm/bug.h>
> >
> >  #include "netlabel_mgmt.h"
> >  #include "netlabel_domainhash.h"
> > +#include "netlabel_user.h"
> >
> >  struct netlbl_domhsh_tbl {
> >  	struct list_head *tbl;
> > @@ -186,6 +188,7 @@ int netlbl_domhsh_init(u32 size)
> >  /**
> >   * netlbl_domhsh_add - Adds a entry to the domain hash table
> >   * @entry: the entry to add
> > + * @audit_secid: the LSM secid to use in the audit message
> >   *
> >   * Description:
> >   * Adds a new entry to the domain hash table and handles any updates to
> > the @@ -193,10 +196,12 @@ int netlbl_domhsh_init(u32 size)
> >   * negative on failure.
> >   *
> >   */
> > -int netlbl_domhsh_add(struct netlbl_dom_map *entry)
> > +int netlbl_domhsh_add(struct netlbl_dom_map *entry, u32 audit_secid)
> >  {
> >  	int ret_val;
> >  	u32 bkt;
> > +	struct audit_buffer *audit_buf;
> > +	char *audit_domain;
> >
> >  	switch (entry->type) {
> >  	case NETLBL_NLTYPE_UNLABELED:
> > @@ -236,6 +241,26 @@ int netlbl_domhsh_add(struct netlbl_dom_
> >  		spin_unlock(&netlbl_domhsh_def_lock);
> >  	} else
> >  		ret_val = -EINVAL;
> > +	if (ret_val == 0) {
> > +		if (entry->domain != NULL)
> > +			audit_domain = entry->domain;
> > +		else
> > +			audit_domain = "(default)";
> > +		audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_ADD,
> > +						      audit_secid);
> > +		audit_log_format(audit_buf, " domain=%s", audit_domain);
> > +		switch (entry->type) {
> > +		case NETLBL_NLTYPE_UNLABELED:
> > +			audit_log_format(audit_buf, " protocol=unlbl");
> > +			break;
> > +		case NETLBL_NLTYPE_CIPSOV4:
> > +			audit_log_format(audit_buf,
> > +					 " protocol=cipsov4 doi=%u",
> > +					 entry->type_def.cipsov4->doi);
> > +			break;
> > +		}
> > +		audit_log_end(audit_buf);
> > +	}
> >  	rcu_read_unlock();
> >
> >  	if (ret_val != 0) {
> > @@ -254,6 +279,7 @@ int netlbl_domhsh_add(struct netlbl_dom_
> >  /**
> >   * netlbl_domhsh_add_default - Adds the default entry to the domain hash
> > table * @entry: the entry to add
> > + * @audit_secid: the LSM secid to use in the audit message
> >   *
> >   * Description:
> >   * Adds a new default entry to the domain hash table and handles any
> > updates @@ -261,14 +287,15 @@ int netlbl_domhsh_add(struct netlbl_dom_
> >   * negative on failure.
> >   *
> >   */
> > -int netlbl_domhsh_add_default(struct netlbl_dom_map *entry)
> > +int netlbl_domhsh_add_default(struct netlbl_dom_map *entry, u32
> > audit_secid) {
> > -	return netlbl_domhsh_add(entry);
> > +	return netlbl_domhsh_add(entry, audit_secid);
> >  }
> >
> >  /**
> >   * netlbl_domhsh_remove - Removes an entry from the domain hash table
> >   * @domain: the domain to remove
> > + * @audit_secid: the LSM secid to use in the audit message
> >   *
> >   * Description:
> >   * Removes an entry from the domain hash table and handles any updates to
> > the @@ -276,10 +303,12 @@ int netlbl_domhsh_add_default(struct net
> >   * negative on failure.
> >   *
> >   */
> > -int netlbl_domhsh_remove(const char *domain)
> > +int netlbl_domhsh_remove(const char *domain, u32 audit_secid)
> >  {
> >  	int ret_val = -ENOENT;
> >  	struct netlbl_dom_map *entry;
> > +	struct audit_buffer *audit_buf;
> > +	char *audit_domain;
> >
> >  	rcu_read_lock();
> >  	if (domain != NULL)
> > @@ -316,8 +345,18 @@ int netlbl_domhsh_remove(const char *dom
> >  			ret_val = -ENOENT;
> >  		spin_unlock(&netlbl_domhsh_def_lock);
> >  	}
> > -	if (ret_val == 0)
> > +	if (ret_val == 0) {
> > +		if (entry->domain != NULL)
> > +			audit_domain = entry->domain;
> > +		else
> > +			audit_domain = "(default)";
> > +		audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL,
> > +						      audit_secid);
> > +		audit_log_format(audit_buf, " domain=%s", audit_domain);
> > +		audit_log_end(audit_buf);
> > +
> >  		call_rcu(&entry->rcu, netlbl_domhsh_free_entry);
> > +	}
> >
> >  remove_return:
> >  	rcu_read_unlock();
> > @@ -326,6 +365,7 @@ remove_return:
> >
> >  /**
> >   * netlbl_domhsh_remove_default - Removes the default entry from the table
> > + * @audit_secid: the LSM secid to use in the audit message
> >   *
> >   * Description:
> >   * Removes/resets the default entry for the domain hash table and handles
> > any @@ -333,9 +373,9 @@ remove_return:
> >   * success, non-zero on failure.
> >   *
> >   */
> > -int netlbl_domhsh_remove_default(void)
> > +int netlbl_domhsh_remove_default(u32 audit_secid)
> >  {
> > -	return netlbl_domhsh_remove(NULL);
> > +	return netlbl_domhsh_remove(NULL, audit_secid);
> >  }
> >
> >  /**
> > Index: net-2.6/net/netlabel/netlabel_domainhash.h
> > ===================================================================
> > --- net-2.6.orig/net/netlabel/netlabel_domainhash.h
> > +++ net-2.6/net/netlabel/netlabel_domainhash.h
> > @@ -57,9 +57,9 @@ struct netlbl_dom_map {
> >  int netlbl_domhsh_init(u32 size);
> >
> >  /* Manipulate the domain hash table */
> > -int netlbl_domhsh_add(struct netlbl_dom_map *entry);
> > -int netlbl_domhsh_add_default(struct netlbl_dom_map *entry);
> > -int netlbl_domhsh_remove_default(void);
> > +int netlbl_domhsh_add(struct netlbl_dom_map *entry, u32 audit_secid);
> > +int netlbl_domhsh_add_default(struct netlbl_dom_map *entry, u32
> > audit_secid); +int netlbl_domhsh_remove_default(u32 audit_secid);
> >  struct netlbl_dom_map *netlbl_domhsh_getentry(const char *domain);
> >  int netlbl_domhsh_walk(u32 *skip_bkt,
> >  		     u32 *skip_chain,
> > Index: net-2.6/net/netlabel/netlabel_mgmt.c
> > ===================================================================
> > --- net-2.6.orig/net/netlabel/netlabel_mgmt.c
> > +++ net-2.6/net/netlabel/netlabel_mgmt.c
> > @@ -108,7 +108,7 @@ static int netlbl_mgmt_add(struct sk_buf
> >
> >  	switch (entry->type) {
> >  	case NETLBL_NLTYPE_UNLABELED:
> > -		ret_val = netlbl_domhsh_add(entry);
> > +		ret_val = netlbl_domhsh_add(entry, NETLINK_CB(skb).sid);
> >  		break;
> >  	case NETLBL_NLTYPE_CIPSOV4:
> >  		if (!info->attrs[NLBL_MGMT_A_CV4DOI])
> > @@ -125,7 +125,7 @@ static int netlbl_mgmt_add(struct sk_buf
> >  			rcu_read_unlock();
> >  			goto add_failure;
> >  		}
> > -		ret_val = netlbl_domhsh_add(entry);
> > +		ret_val = netlbl_domhsh_add(entry, NETLINK_CB(skb).sid);
> >  		rcu_read_unlock();
> >  		break;
> >  	default:
> > @@ -161,7 +161,7 @@ static int netlbl_mgmt_remove(struct sk_
> >  		return -EINVAL;
> >
> >  	domain = nla_data(info->attrs[NLBL_MGMT_A_DOMAIN]);
> > -	return netlbl_domhsh_remove(domain);
> > +	return netlbl_domhsh_remove(domain, NETLINK_CB(skb).sid);
> >  }
> >
> >  /**
> > @@ -277,7 +277,8 @@ static int netlbl_mgmt_adddef(struct sk_
> >
> >  	switch (entry->type) {
> >  	case NETLBL_NLTYPE_UNLABELED:
> > -		ret_val = netlbl_domhsh_add_default(entry);
> > +		ret_val = netlbl_domhsh_add_default(entry,
> > +						    NETLINK_CB(skb).sid);
> >  		break;
> >  	case NETLBL_NLTYPE_CIPSOV4:
> >  		if (!info->attrs[NLBL_MGMT_A_CV4DOI])
> > @@ -294,7 +295,8 @@ static int netlbl_mgmt_adddef(struct sk_
> >  			rcu_read_unlock();
> >  			goto adddef_failure;
> >  		}
> > -		ret_val = netlbl_domhsh_add_default(entry);
> > +		ret_val = netlbl_domhsh_add_default(entry,
> > +						    NETLINK_CB(skb).sid);
> >  		rcu_read_unlock();
> >  		break;
> >  	default:
> > @@ -322,7 +324,7 @@ adddef_failure:
> >   */
> >  static int netlbl_mgmt_removedef(struct sk_buff *skb, struct genl_info
> > *info) {
> > -	return netlbl_domhsh_remove_default();
> > +	return netlbl_domhsh_remove_default(NETLINK_CB(skb).sid);
> >  }
> >
> >  /**
> > Index: net-2.6/net/netlabel/netlabel_unlabeled.c
> > ===================================================================
> > --- net-2.6.orig/net/netlabel/netlabel_unlabeled.c
> > +++ net-2.6/net/netlabel/netlabel_unlabeled.c
> > @@ -64,6 +64,27 @@ static struct nla_policy netlbl_unlabel_
> >  };
> >
> >  /*
> > + * Helper Functions
> > + */
> > +
> > +/**
> > + * netlbl_unlabel_acceptflg_set - Set the unlabeled accept flag
> > + * @value: desired value
> > + * @audit_secid: the LSM secid to use in the audit message
> > + *
> > + * Description:
> > + * Set the value of the unlabeled accept flag to @value.
> > + *
> > + */
> > +static void netlbl_unlabel_acceptflg_set(u8 value, u32 audit_secid)
> > +{
> > +	atomic_set(&netlabel_unlabel_accept_flg, value);
> > +	netlbl_audit_nomsg((value ?
> > +			    AUDIT_MAC_UNLBL_ACCEPT : AUDIT_MAC_UNLBL_DENY),
> > +			   audit_secid);
> 
> Looking at how this is being used, I think only 1 message type should be used. 
> There are places in the audit system where we set a flag to 1 or 0, but only 
> have 1 message type. We record the old and new value. So, you'd need to pass 
> that to the logger.
> 
> > +}
> > +
> > +/*
> >   * NetLabel Command Handlers
> >   */
> >
> > @@ -79,18 +100,18 @@ static struct nla_policy netlbl_unlabel_
> >   */
> >  static int netlbl_unlabel_accept(struct sk_buff *skb, struct genl_info
> > *info) {
> > -	int ret_val = -EINVAL;
> >  	u8 value;
> >
> >  	if (info->attrs[NLBL_UNLABEL_A_ACPTFLG]) {
> >  		value = nla_get_u8(info->attrs[NLBL_UNLABEL_A_ACPTFLG]);
> >  		if (value == 1 || value == 0) {
> > -			atomic_set(&netlabel_unlabel_accept_flg, value);
> > -			ret_val = 0;
> > +			netlbl_unlabel_acceptflg_set(value,
> > +						     NETLINK_CB(skb).sid);
> > +			return 0;
> >  		}
> >  	}
> >
> > -	return ret_val;
> > +	return -EINVAL;
> >  }
> >
> >  /**
> > @@ -229,16 +250,19 @@ int netlbl_unlabel_defconf(void)
> >  {
> >  	int ret_val;
> >  	struct netlbl_dom_map *entry;
> > +	u32 secid;
> > +
> > +	security_task_getsecid(current, &secid);
> >
> >  	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
> >  	if (entry == NULL)
> >  		return -ENOMEM;
> >  	entry->type = NETLBL_NLTYPE_UNLABELED;
> > -	ret_val = netlbl_domhsh_add_default(entry);
> > +	ret_val = netlbl_domhsh_add_default(entry, secid);
> >  	if (ret_val != 0)
> >  		return ret_val;
> >
> > -	atomic_set(&netlabel_unlabel_accept_flg, 1);
> > +	netlbl_unlabel_acceptflg_set(1, secid);
> >
> >  	return 0;
> >  }
> > Index: net-2.6/net/netlabel/netlabel_user.c
> > ===================================================================
> > --- net-2.6.orig/net/netlabel/netlabel_user.c
> > +++ net-2.6/net/netlabel/netlabel_user.c
> > @@ -32,6 +32,9 @@
> >  #include <linux/types.h>
> >  #include <linux/list.h>
> >  #include <linux/socket.h>
> > +#include <linux/audit.h>
> > +#include <linux/tty.h>
> > +#include <linux/security.h>
> >  #include <net/sock.h>
> >  #include <net/netlink.h>
> >  #include <net/genetlink.h>
> > @@ -74,3 +77,91 @@ int netlbl_netlink_init(void)
> >
> >  	return 0;
> >  }
> > +
> > +/*
> > + * NetLabel Audit Functions
> > + */
> > +
> > +/**
> > + * netlbl_audit_start_common - Start an audit message
> > + * @type: audit message type
> > + * @secid: LSM context ID
> > + *
> > + * Description:
> > + * Start an audit message using the type specified in @type and fill the
> > audit + * message with some fields common to all NetLabel audit messages. 
> > Returns + * a pointer to the audit buffer on success, NULL on failure.
> > + *
> > + */
> > +struct audit_buffer *netlbl_audit_start_common(int type, u32 secid)
> > +{
> 
> Generally, logging functions are moved into auditsc.c where the context and 
> other functions are defined. 
> 
> > +	struct audit_context *audit_ctx = current->audit_context;
> > +	struct audit_buffer *audit_buf;
> > +	uid_t audit_loginuid;
> > +	const char *audit_tty;
> > +	char audit_comm[sizeof(current->comm)];
> > +	struct vm_area_struct *vma;
> > +	char *secctx;
> > +	u32 secctx_len;
> > +
> > +	audit_buf = audit_log_start(audit_ctx, GFP_ATOMIC, type);
> > +	if (audit_buf == NULL)
> > +		return NULL;
> > +
> > +	audit_loginuid = audit_get_loginuid(audit_ctx);
> 
> Netlink is async protocol, you should use the loginuid of the netlink packet 
> and pass it into this function.
> 
> > +	if (current->signal &&
> > +	    current->signal->tty &&
> > +	    current->signal->tty->name)
> > +		audit_tty = current->signal->tty->name;
> > +	else
> > +		audit_tty = "(none)";
> 
> Netlink is an async protocol. How do you know that the sender is current? This 
> is a global comment, please check use of current everywhere.
> 
> > +	get_task_comm(audit_comm, current);
> > +
> > +	audit_log_format(audit_buf,
> > +			 "netlabel: auid=%u uid=%u tty=%s pid=%d",
> > +			 audit_loginuid,
> > +			 current->uid,
> > +			 audit_tty,
> > +			 current->pid);
> 
> Why are you logging all this? When we add audit rules, all that we log is the 
> auid, and subj. If we need to log all this, we should probably have a helper 
> function that gets called by other config change loggers.
> 
> > +	audit_log_format(audit_buf, " comm=");
> > +	audit_log_untrustedstring(audit_buf, audit_comm);
> > +	if (current->mm) {
> > +		down_read(&current->mm->mmap_sem);
> > +		vma = current->mm->mmap;
> > +		while (vma) {
> > +			if ((vma->vm_flags & VM_EXECUTABLE) &&
> > +			    vma->vm_file) {
> > +				audit_log_d_path(audit_buf,
> > +						 " exe=",
> > +						 vma->vm_file->f_dentry,
> > +						 vma->vm_file->f_vfsmnt);
> > +				break;
> > +			}
> > +			vma = vma->vm_next;
> > +		}
> > +		up_read(&current->mm->mmap_sem);
> > +	}
> > +
> 
> If this function was moved inside auditsc.c you could use a function there 
> that does this. But the question remains why all this data?
> 
> > +	if (secid != 0 &&
> > +	    security_secid_to_secctx(secid, &secctx, &secctx_len) == 0)
> > +		audit_log_format(audit_buf, " subj=%s", secctx);
> > +
> > +	return audit_buf;
> > +}
> > +
> > +/**
> > + * netlbl_audit_nomsg - Send an audit message without additional text
> > + * @type: audit message type
> > + * @secid: LSM context ID
> > + *
> > + * Description:
> > + * Send an audit message with only the common NetLabel audit fields.
> > + *
> > + */
> > +void netlbl_audit_nomsg(int type, u32 secid)
> > +{
> > +	struct audit_buffer *audit_buf;
> > +
> > +	audit_buf = netlbl_audit_start_common(type, secid);
> > +	audit_log_end(audit_buf);
> 
> We normally record old and new value when changing flags like this.
> 
> > +}
> > Index: net-2.6/net/netlabel/netlabel_user.h
> > ===================================================================
> > --- net-2.6.orig/net/netlabel/netlabel_user.h
> > +++ net-2.6/net/netlabel/netlabel_user.h
> > @@ -34,6 +34,7 @@
> >  #include <linux/types.h>
> >  #include <linux/skbuff.h>
> >  #include <linux/capability.h>
> > +#include <linux/audit.h>
> >  #include <net/netlink.h>
> >  #include <net/genetlink.h>
> >  #include <net/netlabel.h>
> > @@ -75,4 +76,9 @@ static inline void *netlbl_netlink_hdr_p
> >
> >  int netlbl_netlink_init(void);
> >
> > +/* NetLabel Audit Functions */
> > +
> > +struct audit_buffer *netlbl_audit_start_common(int type, u32 secid);
> > +void netlbl_audit_nomsg(int type, u32 secid);
> > +
> >  #endif
> >
> > --
> > paul moore
> > linux security @ hp
> >
> > --
> > Linux-audit mailing list
> > Linux-audit at redhat.com
> > https://www.redhat.com/mailman/listinfo/linux-audit
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
James Morris
<jmorris at namei.org>




More information about the Linux-audit mailing list