[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] having problems trying to setup a two node cluster



this did the trick...thanks!

Rick Stevens wrote:
Looking back at your cluster.conf, I see you're using broadcast.  I used
multicast because, in the first CVS checkout I did, broadcast didn't
work properly.  It's possible your SRPMs also have that flaw.  Why not
try multicast and see if that works.  Add that route I mentioned and
here's my cluster.conf which you can crib:

<?xml version="1.0"?>
<cluster name="test" config_version="1">


<cman two-node="1" expected_votes="1"> <multicast addr="224.0.0.1"/> </cman>


<nodes> <node name="gfs-01-001" votes="1"> <multicast addr="224.0.0.1" interface="eth1"/> <fence> <method name="single"> <device name="human" ipaddr="gfs-01-001"/> </method> </fence> </node>


<node name="gfs-01-002" votes="1"> <multicast addr="224.0.0.1" interface="eth1"/> <fence> <method name="single"> <device name="human" ipaddr="gfs-01-002"/> </method> </fence> </node> </nodes>


<fence_devices> <device name="human" agent="fence_manual"/> </fence_devices> </cluster>

----------------------------------------------------------------------
- Rick Stevens, Senior Systems Engineer     rstevens vitalstream com -
- VitalStream, Inc.                       http://www.vitalstream.com -
-                                                                    -
-  What's small, yellow and very, VERY dangerous?  The root canary!  -
----------------------------------------------------------------------

--
Linux-cluster mailing list
Linux-cluster redhat com
http://www.redhat.com/mailman/listinfo/linux-cluster


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]