[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] manual fencing not working in RHEL4 branch



David,

We are using cluster-1.00 code.  I didn't see modifications under 1.01
that would have an impact, but maybe I missed something.

You are right, I see step 5 happen before step 4 (but remember,
sometimes it works fine specially after I run with 'fenced -D').  And
I have never seen any of these problems when I use IPMI or DRAC.

BTW, for simplicity sake, I wasn't even running rgmanager.  Just ccsd,
cman and fenced.

Thanks,
Ken


On 12/8/05, David Teigland <teigland redhat com> wrote:
> On Mon, Dec 05, 2005 at 07:04:38PM -0700, busy admin wrote:
> > What is the problem:
> > When running manual fencing and doing failover testing, my secondary
> > node takes over the service without waiting for a fence_ack_manual.
> > This all works perfectly with automatic fencing (ipmi, drac).
>
> We're going to try this here.  Just to be clear, we expect:
>
> 1. A and B in cluster, in fence domain and running rgmanager
> 2. kill B
> 3. A should start fence_manual and print message in /var/log/messages
> 4. admin should run fence_ack_manual on A
> 5. services from B should fail over to A
>
> The problem is you're seeing 5 happen before 4.  What version of the
> code are you using (cluster-1.01.00 ?)
>
> Thanks
> Dave
>
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]