[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Linux-cluster] fence - convert manpages to the man macro package



Hi folks

The current manpages are written in plain nroff which is not parsable by
many scripts.

The attached patch converts the manpages in the fence package to the man
macro package.

Bastian

-- 
Schshschshchsch.
		-- The Gorn, "Arena", stardate 3046.2
=== man/fence.8
==================================================================
--- man/fence.8  (revision 317)
+++ man/fence.8  (local)
@@ -5,45 +5,66 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence(8)''fence(8)'
+.TH fence 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 I/O Fencing reference guide
 
-.in
-\fBSYNOPSIS\fP
-.in +7
+.SH SYNOPSIS
 Overview of related manual pages
-.sp
-.in
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 The I/O Fencing documentation has been split into a number of sections.  Please
 refer to the table below to determine which man page coincides with the
 command/feature you are looking for.
-.sp
- fence          I/O Fencing overview (this man page)
- fenced         I/O Fencing daemon
 
-I/O Fencing agents
+.TP 10
+fence
+I/O Fencing overview (this man page)
+.TP
+fenced
+I/O Fencing daemon
 
- fence_apc           for APC MasterSwitch and APC 79xx models
- fence_bladecenter   for IBM Bladecenters w/ telnet interface
- fence_brocade       for Brocade fibre channel switches (PortDisable)
- fence_egenera       for Egenera blades
- fence_gnbd          for GNBD-based GFS clusters
- fence_ilo           for HP ILO interfaces (formerly fence_rib)
- fence_manual        for manual intervention
- fence_mcdata        for McData fibre channel switches
- fence_ack_manual    for manual intervention
- fence_sanbox2       for Qlogic SAN Box fibre channel switches
- fence_vixel         for Vixel switches (PortDisable)
- fence_wti           for WTI Network Power Switch
- fence_node          for use by lock_gulmd
+.SS I/O Fencing agents
 
-.sp
-.in
-\fBSEE ALSO\fP
-.in +7
+.TP 20
+fence_apc
+for APC MasterSwitch and APC 79xx models
+.TP
+fence_bladecenter
+for IBM Bladecenters w/ telnet interface
+.TP
+fence_brocade
+for Brocade fibre channel switches (PortDisable)
+.TP
+fence_egenera
+for Egenera blades
+.TP
+fence_gnbd
+for GNBD-based GFS clusters
+.TP
+fence_ilo
+for HP ILO interfaces (formerly fence_rib)
+.TP
+fence_manual
+for manual intervention
+.TP
+fence_mcdata
+for McData fibre channel switches
+.TP
+fence_ack_manual
+for manual intervention
+.TP
+fence_sanbox2
+for Qlogic SAN Box fibre channel switches
+.TP
+fence_vixel
+for Vixel switches (PortDisable)
+.TP
+fence_wti
+for WTI Network Power Switch
+.TP
+fence_node
+for use by lock_gulmd
+
+.SH SEE ALSO
 gnbd(8), gfs(8)
=== man/fence_ack_manual.8
==================================================================
--- man/fence_ack_manual.8  (revision 317)
+++ man/fence_ack_manual.8  (local)
@@ -5,57 +5,39 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_ack_manual(8)''fence_ack_manual(8)'
+.TH fence_ack_manual 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_ack_manual - program run by an operator as a part of manual I/O Fencing
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_ack_manual -n\fP \fInodename\fP
+.SH SYNOPSIS
+.B
+fence_ack_manual
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_ack_manual is run by an operator on the same node that fence_manual(8) 
 was run after the operator has reset a node which required fencing.  A message 
 in the system log indicates to the operator that they must reset a machine and 
 then run fence_ack_manual.  Running fence_ack_manual allows the cluster to 
 continue with recovery of the fenced machine.  The victim may be disconnected 
 from storage rather than resetting it.
-.sp
-.in 
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-O\fP
-.in +7
 Run without prompting for user confirmation.
-.sp
-.in
+.TP
 \fB-n\fP \fInodename\fP
-.in +7
 Name of node that has been reset or disconnected from storage.
-.sp
-.in
+.TP
 \fB-s\fP \fIIPaddress\fP
-.in +7
 IP address of the machine which has been reset or disconnected from storage.  (Deprecated; use -n instead.)
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_apc.8
==================================================================
--- man/fence_apc.8  (revision 317)
+++ man/fence_apc.8  (local)
@@ -5,132 +5,85 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_apc(8)''fence_apc(8)'
+.TH fence_apc 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_apc - I/O Fencing agent for APC MasterSwitch
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_apc -a\fP \fIIPaddress\fR \fB-l\fP \fIlogin\fR \fB-p\fP \fIpassword\fR \fB-n\fP \fIoutlet\fR 
-[\fB-o\fP action] [\fB-T\fP] [\fB-v\fP]
+.SH SYNOPSIS
+.B 
+Bfence_apc
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_apc is an I/O Fencing agent which can be used with the APC MasterSwitch
 network power switch.  It logs into a MasterSwitch via telnet and reboots
 a specified outlet.  Lengthy telnet connections to the MasterSwitch should
 be avoided while a GFS cluster is running because the connection will
 block any necessary fencing actions.
-.sp
+
 fence_apc accepts options on the command line as well as from stdin.  
 Fenced sends parameters through stdin when it execs the agent.  fence_apc 
 can be run by itself with command line options.  This is useful for testing 
 and for turning outlets on or off from scripts.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fR
-.in +7
 IP address or hostname of the switch.
-.sp
-.in
+.TP
 \fB-h\fP 
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-l\fP \fIlogin\fR
-.in +7
 Login name.
-.sp
-.in
+.TP
 \fB-n\fP \fI[<switch>:]outlet\fR
-.in +7
 The outlet number to act upon.  
-.sp
-.in
+.TP
 \fB-o\fP \fIaction\fR
-.in +7
 The action required.  Reboot (default), Off or On.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fR
-.in +7
 Password for login.
-.sp
-.in
+.TP
 \fB-T\fP
-.in +7
 Test only.  Answer NO to the confirmation prompt instead of YES.
-.in
-.sp
+.TP
 \fB-v\fP
-.in +7
 Verbose.  Record telnet session in /tmp/apclog.
-.in
-.sp
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.in
-.sp
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
 
-\fI agent = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_apc.
-.sp
-
+.TP
 \fIipaddr = < hostname | ip >\fR
-.sp
 IP address or hostname of the switch.
-.sp
-
-\fI login = < param >\fR
-.sp
+.TP
+\fIlogin = < param >\fR
 Login name.
-.sp
-
-\fI option = < param >\fR
-.sp
+.TP
+\fIoption = < param >\fR
 The action required.  Reboot (default), Off or On.
-.sp
-
-\fI passwd = < param >\fR
-.sp
+.TP
+\fIpasswd = < param >\fR
 Password for login.
-.sp
-
-\fI port = < param >\fR
-.sp
+.TP
+\fIport = < param >\fR
 The outlet number to act upon.
-.sp
-
-\fI switch = < param >\fR
-.sp
+.TP
+\fIswitch = < param >\fR
 The switch to operate on.  Defaults to "1" if not specified.
-.sp
-
-\fI test = < param >\fR
-.sp
+.TP
+\fItest = < param >\fR
 Test only.  Answer NO to the confirmation prompt instead of YES.
-.sp
-
-\fI verbose = < param >\fR
-.sp
+.TP
+\fIverbose = < param >\fR
 Verbose.  Record telnet session in /tmp/apclog.
-.sp
 
-
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_baytech.8
==================================================================
--- man/fence_baytech.8  (revision 317)
+++ man/fence_baytech.8  (local)
@@ -5,21 +5,17 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_baytech(8)''fence_baytech(8)'
+.TH fence_baytech 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_baytech - I/O Fencing agent for Baytech RPC switches in combination with a Cyclades Terminal Server
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_baytech -a\fP \fIhost\fR \fB-l\fP \fIlogin\fR \fB-p\fP \fIpassword\fR \fB-n\fP \fIoutletname\fR \fB-o\fP \fIaction\fR
+.SH SYNOPSIS
+.B
+fence_baytech
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 
 This fencing agent is written for the Baytech RPC27-20nc in combination with
 a Cyclades terminal server.  The Cyclades TS exports the RPC's serial port
@@ -27,95 +23,61 @@
 However, this script relys upon the assumption that Telnet is used.  Future
 features to this agent would allow the agent to work with a mulitude of 
 different communication protocols such as Telnet, SSH or Kermit.
-.sp
+
 The other assumption that is made is that Outlet names do not end in space.
 The name "Foo" and "Foo    " are identical when the RPC prints them with
 the status command.
-.sp
+
 fence_baytech accepts options on the command line as well as from stdin.
 fenced sends parameters through stdin when it execs the agent.  fence_baytech
 can be run by itself with command line options which is useful for testing.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIhost\fP
-.in +7 
 IP address or hostname to connect to.
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-l\fP \fIlogin\fP
-.in +7
 Username name for the switch.
-.sp
-.in
+.TP
 \fB-n\fP \fIport\fP
-.in +7
 The name of the outlet to act upon.
-.in
-.sp
+.TP
 \fB-o\fP \fIaction\fP
-.in +7
 The action required.  disable (default) or enable.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fP
-.in +7
 Password for login.
-.sp
-.in
+.TP
 \fB-q\fP
-.in +7
 Quiet mode: print only error messages.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
+.SH STDIN PARAMETERS
 
-\fI agent = < param >\fR
-.sp
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_baytech.
-.sp
-
-\fI host = < hostname | ip >\fR
-.sp
+.TP
+\fIhost = < hostname | ip >\fR
 IP address or hostname to connect to.
-.sp
-
-\fI login = < param >\fR
-.sp
+.TP
+\fIlogin = < param >\fR
 Login name.
-.sp
-
-\fI action = < param >\fR
-.sp
+.TP
+\fIaction = < param >\fR
 The action required.  On, Off, Status or Reboot (default)
-.sp
-
-\fI passwd = < param >\fR
-.sp
+.TP
+\fIpasswd = < param >\fR
 Password for login.
-.sp
-
-\fI outlet = < param >\fR
-.sp
+.TP
+\fIoutlet = < param >\fR
 The name of the outlet to act upon.
-.sp
 
-
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_bladecenter.8
==================================================================
--- man/fence_bladecenter.8  (revision 317)
+++ man/fence_bladecenter.8  (local)
@@ -5,115 +5,73 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_bladecenter(8)''fence_bladecenter(8)'
+.TH fence_bladecenter 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_brocade - I/O Fencing agent for IBM Bladecenter
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_bladecenter-a\fP \fIIPaddress\fR \fB-l\fP \fIlogin\fR \fB-p\fP \fIpassword\fR \fB-n\fP \fIblade\fR \fB-o\fP \fIaction\fR
+.SH SYNOPSIS
+.B
+fence_bladecenter
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_bladecenter is an I/O Fencing agent which can be used with IBM Bladecenters 
 with recent enough firmware that includes telnet support.  It logs into a Brocade 
 chasis via telnet and uses the command line interface to power on and off blades.
 fence_bladecenter accepts options on the command line or from stdin.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fP
-.in +7 
 IP address of the Bladecenter.
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-l\fP \fIlogin\fP
-.in +7
 Login name for the Bladecenter.
-.sp
-.in
+.TP
 \fB-n\fP \fIblade\fP
-.in +7
 The blade to operate on.
-.in
-.sp
+.TP
 \fB-o\fP \fIaction\fP
-.in +7
 The action required.  Valid actions are on, off, reboot (default) and status.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fP
-.in +7
 Password for login.
-.sp
-.in
+.TP
 \fB-q\fP
-.in +7
 Quiet mode: print only error messages.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
+.TP
 \fB-v\fP \fIdebuglog\fP
-.in +7
 Log the telnet session to \fIdebuglog\fP for debugging purposes.
-.sp
-.in
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
-\fI agent = < param >\fR
-.sp
-This option is used by fence_node(8) and is ignored by fence_brocade.
-.sp
-
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
+This option is used by fence_node(8) and is ignored by fence_bladecenter.
+.TP
 \fIipaddr = < hostname | ip >\fR
-.sp
 IP address or hostname of the switch.
-.sp
-
-\fI login = < param >\fR
-.sp
+.TP
+\fIlogin = < param >\fR
 Login name.
-.sp
-
-\fI option = < param >\fR
-.sp
+.TP
+\fIoption = < param >\fR
 The action required.  disable (default) or enable.
-.sp
-
-\fI passwd = < param >\fR
-.sp
+.TP
+\fIpasswd = < param >\fR
 Password for login.
-.sp
-
-\fI blade = < param >\fR
-.sp
+.TP
+\fIblade = < param >\fR
 The blade to operate on.
-.sp
-
-\fI debuglog = < param>\fR
-.sp
+.TP
+\fIdebuglog = < param>\fR
 Optional parameter to send debug transcript of the telnet session to a log file
-.sp
 
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_brocade.8
==================================================================
--- man/fence_brocade.8  (revision 317)
+++ man/fence_brocade.8  (local)
@@ -5,118 +5,79 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_brocade(8)''fence_brocade(8)'
+.TH fence_brocade 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_brocade - I/O Fencing agent for Brocade FC switches
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_brocade -a\fP \fIIPaddress\fR \fB-l\fP \fIlogin\fR \fB-p\fP \fIpassword\fR \fB-n\fP \fIport\fR \fB-o\fP \fIaction\fR
+.SH SYNOPSIS
+.B
+fence_brocade
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_brocade is an I/O Fencing agent which can be used with Brocade FC 
 switches.  It logs into a Brocade switch via telnet and disables a specified 
 port.  Disabling the port which a machine is connected to effectively fences 
 that machine.  Lengthy telnet connections to the switch should be avoided 
 while a GFS cluster is running because the connection will block any necessary 
 fencing actions.
-.sp
+
 fence_brocade accepts options on the command line as well as from stdin.
 fenced sends parameters through stdin when it execs the agent.  fence_brocade 
 can be run by itself with command line options which is useful for testing.
-.sp
+
 After a fence operation has taken place the fenced machine can no longer connect
 to the Brocade FC switch.  When the fenced machine is ready to be brought back 
 into the GFS cluster (after reboot) the port on the Brocade FC switch needs to 
 be enabled. This can be done by running fence_brocade and specifying the 
 enable action.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fP
-.in +7 
 IP address of the switch.
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-l\fP \fIlogin\fP
-.in +7
 Login name for the switch.
-.sp
-.in
+.TP
 \fB-n\fP \fIport\fP
-.in +7
 The port number to disable on the switch.
-.in
-.sp
+.TP
 \fB-o\fP \fIaction\fP
-.in +7
 The action required.  disable (default) or enable.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fP
-.in +7
 Password for login.
-.sp
-.in
+.TP
 \fB-q\fP
-.in +7
 Quiet mode: print only error messages.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
-\fI agent = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_brocade.
-.sp
-
+.TP
 \fIipaddr = < hostname | ip >\fR
-.sp
 IP address or hostname of the switch.
-.sp
-
-\fI login = < param >\fR
-.sp
+.TP
+\fIlogin = < param >\fR
 Login name.
-.sp
-
-\fI option = < param >\fR
-.sp
+.TP
+\fIoption = < param >\fR
 The action required.  disable (default) or enable.
-.sp
-
-\fI passwd = < param >\fR
-.sp
+.TP
+\fIpasswd = < param >\fR
 Password for login.
-.sp
-
-\fI port = < param >\fR
-.sp
+.TP
+\fIport = < param >\fR
 The port number to disable on the switch.
-.sp
 
-
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_cpint.8
==================================================================
--- man/fence_cpint.8  (revision 317)
+++ man/fence_cpint.8  (local)
@@ -5,21 +5,17 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_cpint(8)''fence_cpint(8)'
+.TH fence_cpint 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_cpint - I/O Fencing agent for GFS on s390 and zSeries VM clusters
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_cpint -u\fP \fIuserid\fP
+.SH SYNOPSIS
+.B
+fence_cpint
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_cpint is an I/O Fencing agent used on a virtual machine running GFS in a
 s390 or zSeries VM cluster.
 It uses the cpint package to send a CP LOGOFF command to the specified virtual
@@ -31,55 +27,33 @@
 the secondary user of the virtual machine to be fenced.  This means that unless
 all of you gulm server nodes are privilege class C, fence_cpint can only be
 used with SLM.
-.sp
 
 fence_cpint accepts options on the command line as well as from stdin.
 fence_node sends the options through stdin when it execs the agent.
 fence_cpint can be run by itself with command line options which is useful for
 testing.
-.sp
 
-.in
-\fBOPTIONS\fP
-.in
+.SH OPTIONS
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-
-.in
+.TP
 \fB-u\fP \fIuserid\fP
-.in +7
 userid of the virtual machine to fence (required).
-.sp
-
-.in
+.TP
 \fB-q\fP
-.in +7
 quiet mode, no output.
-.sp
-
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
 
-.in
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
+.SH STDIN PARAMETERS
+.TP
 \fIagent = < param >\fR
-.sp
 This option is used by fence_node(8) and is ignored by fence_cpint.
-.sp
-
+.TP
 \fIuserid = < parm >\fP
-.sp
 userid of the virtual machine to fence (required).
-.sp
 
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_egenera.8
==================================================================
--- man/fence_egenera.8  (revision 317)
+++ man/fence_egenera.8  (local)
@@ -5,22 +5,17 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_egenera(8)''fence_egenera(8)'
+.TH fence_egenera 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_egenera - I/O Fencing agent for the Egenera BladeFrame
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_egenera -c\fP \fIcserver\fR \fB-l\fP \fIlpan\fR \fB-p\fP \fIpserver\fR [\fB-o\fP action] 
-[\fB-q\fP] 
+.SH SYNOPSIS
+.B
+fence_egenera
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_egenera is an I/O Fencing agent which can be used with the Egenera
 BladeFrame.  It logs into a control blade (cserver) via ssh and operates
 on a processing blade (pserver) identified by the pserver name and the 
@@ -28,87 +23,55 @@
 that ssh keys have been setup so that the fence_egenera does not require
 a password to authenticate.  Refer to ssh(8) for more information on setting
 up ssh keys.
-.sp
+
 fence_egenera accepts options on the command line as well as from stdin.  
 Fenced sends parameters through stdin when it execs the agent.  fence_egenera 
 can also be run by itself with command line options.  
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-c\fP \fIcserver\fR
-.in +7
 The cserver to ssh to.  cserver can be in the form user hostname to
 specify a different user to login as.
-.sp
-.in
+.TP
 \fB-h\fP 
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-l\fP \fIlpan\fR
-.in +7
 the lpan to operate on
-.sp
-.in
+.TP
 \fB-o\fP \fIaction\fR
-.in +7
 The action required.  reboot (default), off, on or status.
-.in
-.sp
+.TP
 \fB-p\fP \fIpserver\fR
-.in +7
 the pserver to operate on
-.sp
-.in
+.TP
 \fB-q\fP
-.in +7
 quite mode.  supress output.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.in
-.sp
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
 
-\fI action = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIaction = < param >\fR
 The action required.  reboot (default), off, on or status.
-.sp
-
-\fI agent = < param >\fR
-.sp
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_apc.
-.sp
-
-\fI cserver = < param >\fR
-.sp
+.TP
+\fIcserver = < param >\fR
 The cserver to ssh to.  cserver can be in the form user hostname to
 specify a different user to login as.
-.sp
-
-\fI lpan = < param >\fR
-.sp
+.TP
+\fIlpan = < param >\fR
 The lpan to operate on
-.sp
-
-\fI pserver = < param >\fR
-.sp
+.TP
+\fIpserver = < param >\fR
 The pserver to operate on
-.sp
+.TP
+\fIesh = < param >\fR
+The path to the esh command on the cserver (default is /opt/panmgr/bin/esh)
 
-\fI esh = < param >\fR
-.sp
-The path to the esh command on the cserver (default is /opt/panmgr/bin/esh )
-.sp
-
-
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8), ssh(8)
=== man/fence_ibmblade.8
==================================================================
--- man/fence_ibmblade.8  (revision 317)
+++ man/fence_ibmblade.8  (local)
@@ -5,99 +5,64 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_ibmblade(8)''fence_ibmblade(8)'
+.TH fence_ibmblade 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_ibmblade - I/O Fencing agent for IBM BladeCenter 
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_ibmblade -a\fP \fIIPaddress\fR \fB-c\fP \fIcommunity\fR \fB-n\fP \fIport\fR \fB-o\fP \fIaction\fR
+.SH SYNOPSIS
+.B
+fence_ibmblade
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_ibmblade is an I/O Fencing agent which can be used with IBM BladeCenter 
 chassis. It issues SNMP Set request to BladeCenter chassins, rebooting, powering
 up or down the specified Blade Server. 
-.sp
+
 fence_ibmblade accepts options on the command line as well as from stdin.
 fenced sends parameters through stdin when it execs the agent.  fence_ibmblade 
 can be run by itself with command line options which is useful for testing.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fP
-.in +7 
 IP address of the BladeCenter chassis. 
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-c\fP \fIcommunity\fP
-.in +7
 SNMP community string to use.
-.sp
-.in
+.TP
 \fB-n\fP \fIport\fP
-.in +7
 The Blade port number to disable.
-.in
-.sp
+.TP
 \fB-o\fP \fIaction\fP
-.in +7
 The action required.  Reboot (default), On or off.
-.in
-.sp
+.TP
 \fB-q\fP
-.in +7
 Quiet mode: print only error messages.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
-\fI agent = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_ibmblade.
-.sp
-
+.TP
 \fIipaddr = < hostname | ip >\fR
-.sp
 IP address or hostname of the switch.
-.sp
-
-\fI community = < param >\fR
-.sp
+.TP
+\fIcommunity = < param >\fR
 SNMP community.
-.sp
-
-\fI option = < param >\fR
-.sp
+.TP
+\fIoption = < param >\fR
 The action required.  reboot (default), on or off.
-.sp
-
-\fI port = < param >\fR
-.sp
+.TP
+\fIport = < param >\fR
 The Blade port number to disable.
-.sp
 
-
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_ilo.8
==================================================================
--- man/fence_ilo.8  (revision 317)
+++ man/fence_ilo.8  (local)
@@ -5,110 +5,72 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_ilo(8)''fence_ilo(8)'
+.TH fence_ilo 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_ilo - I/O Fencing agent for HP Integrated Lights Out card
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_ilo -a\fP \fIIPaddress[:SSLport]\fR \fB-l\fP \fIlogin\fR \fB-p\fP \fIpassword\fR  
-[\fB-o\fP action] [\fB-vqVh\fP] 
+.SH SYNOPSIS
+.B
+fence_ilo
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light 
 Out (iLO) PCI card.  The agent opens an SSL connection to the iLO card.  Once the
 SSL connection is established, the agent is able to communicate with the iLO
 card through an XML stream.  
-.sp
+
 fence_ilo depends on the Net::SSLeay or Net::SSL perl module in order to establish 
 the SSL connection to the iLO card.  Net::SSL is available in the perl-Crypt-SSLeay package
 on RHN (http://rhn.redhat.com). Net::SSLeay is available at http://www.cpan.org.
-.sp
+
 NOTE: fence_ilo deprecates fence_rib.  
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress[:port]\fR
-.in +7
 IP address or hostname of the iLO card.  If the SSL server of the card is
 not running on the default SSL port, 443, then [:port] will also need to be
 specified.
-.sp
-.in
+.TP
 \fB-h\fP 
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-l\fP \fIlogin\fR
-.in +7
 Login name.
-.sp
-.in
+.TP
 \fB-o\fP \fIaction\fR
-.in +7
 The action required.  reboot (default), off, on or status.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fR
-.in +7
 Password for login.
-.sp
-.in
+.TP
 \fB-v\fP
-.in +7
 Verbose.  
-.in
-.sp
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.in
-.sp
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
+.SH STDIN PARAMETERS
+.TP
 \fIaction = < param >\fR
-.sp
 The action required.  reboot (default), off, on or status.
-.sp
-
+.TP
 \fIagent = < param >\fR
-.sp
 This option is used by fence_node(8) and is ignored by fence_ilo.
-.sp
-
+.TP
 \fIhostname = < hostname | ip >\fR
-.sp
 IP address or hostname of the iLO card.
-.sp
-
+.TP
 \fIlogin = < param >\fR
-.sp
 Login name.
-.sp
-
+.TP
 \fIpasswd = < param >\fR
-.sp
 Password for login.
-.sp
-
+.TP
 \fIverbose = < param >\fR
-.sp
 Verbose mode.
-.sp
 
-
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8), fence_rib(8)
=== man/fence_manual.8
==================================================================
--- man/fence_manual.8  (revision 317)
+++ man/fence_manual.8  (local)
@@ -5,76 +5,52 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_manual(8)''fence_manual(8)'
+.TH fence_manual 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_manual - program run by fenced as a part of manual I/O Fencing
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_manual -n\fP \fInodename\fP
+.SH SYNOPSIS
+.B
+fence_manual
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_manual is run by fenced.  It creates a fifo and waits for 
 its counter-part fence_ack_manual(8) to acknowledge that a failed node
 has been reset.  fence_ack_manual(8) should only be run after the operator
 has reset the faulty node.  While waiting for the manual acknowledgement,
 fence_manual also watches for the faulty node to rejoin the cluster;
 if it does, it's taken as an acknowledgement and completes.
-.sp
+
 Note:  fence_manual is provided for use during testing and evaluation
 only.  Sites should not use fence_manual as the primary fencing method
 on a production cluster.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-q\fP
-.in +7
 quiet mode, no output.
-.sp
-.in
+.TP
 \fB-n\fP \fInodename\fP
-.in +7
 The node name (usually hostname) of the machine that needs to be reset or disconnected from shared storage.
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
-.in -7
 
-\fBSTDIN PARAMETERS\fP
-.in
-
-\fI agent = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_manual.
-.sp
-
-\fI nodename = < param >\fR
-.sp
+.TP
+\fInodename = < param >\fR
 The node name (usually hostname) of the machine that needs to be reset or disconnected from storage.
-.sp
-
-\fI ipaddr = < param >\fR
-.sp
+.TP
+\fIipaddr = < param >\fR
 IP address or hostname of the machine that needs to be reset or disconnected from storage.  (Deprecated; use nodename instead.)
 
-.in -7
-
-
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8), fence_ack_manual(8)
=== man/fence_mcdata.8
==================================================================
--- man/fence_mcdata.8  (revision 317)
+++ man/fence_mcdata.8  (local)
@@ -5,118 +5,79 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_mcdata(8)''fence_mcdata(8)'
+.TH fence_mcdata 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_mcdata - I/O Fencing agent for McData FC switches
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_mcdata -a\fP \fIIPaddress\fR \fB-l\fP \fIlogin\fR \fB-p\fP \fIpassword\fR \fB-n\fP \fIport\fR \fB-o\fP \fIaction\fR
+.SH SYNOPSIS
+.B
+fence_mcdata
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_mcdata is an I/O Fencing agent which can be used with McData FC 
 switches.  It logs into a McData switch via telnet and disables a specified 
 port.  Disabling the port which a machine is connected to effectively fences 
 that machine.  Lengthy telnet connections to the switch should be avoided 
 while a GFS cluster is running because the connection will block any necessary 
 fencing actions.
-.sp
+
 fence_mcdata accepts options on the command line as well as from stdin.
 fenced sends parameters through stdin when it execs the agent.  fence_mcdata 
 can be run by itself with command line options which is useful for testing.
-.sp
+
 After a fence operation has taken place the fenced machine can no longer connect
 to the McData FC switch.  When the fenced machine is ready to be brought back 
 into the GFS cluster (after reboot) the port on the McData FC switch needs to 
 be enabled. This can be done by running fence_mcdata and specifying the 
 enable action.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fP
-.in +7 
 IP address of the switch.
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-l\fP \fIlogin\fP
-.in +7
 Username name for the switch.
-.sp
-.in
+.TP
 \fB-n\fP \fIport\fP
-.in +7
 The port number to disable on the switch.
-.in
-.sp
+.TP
 \fB-o\fP \fIaction\fP
-.in +7
 The action required.  disable (default) or enable.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fP
-.in +7
 Password for login.
-.sp
-.in
+.TP
 \fB-q\fP
-.in +7
 Quiet mode: print only error messages.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
-\fI agent = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_mcdata.
-.sp
-
+.TP
 \fIipaddr = < hostname | ip >\fR
-.sp
 IP address or hostname of the switch.
-.sp
-
-\fI login = < param >\fR
-.sp
+.TP
+\fIlogin = < param >\fR
 Login name.
-.sp
-
-\fI option = < param >\fR
-.sp
+.TP
+\fIoption = < param >\fR
 The action required.  disable (default) or enable.
-.sp
-
-\fI passwd = < param >\fR
-.sp
+.TP
+\fIpasswd = < param >\fR
 Password for login.
-.sp
-
-\fI port = < param >\fR
-.sp
+.TP
+\fIport = < param >\fR
 The port number to disable on the switch.
-.sp
 
-
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_node.8
==================================================================
--- man/fence_node.8  (revision 317)
+++ man/fence_node.8  (local)
@@ -4,50 +4,35 @@
 .\"  This copyrighted material is made available to anyone wishing to use,
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
-.tl 'fence_node(8)''fence_node(8)'
-'\"     View with 'groff -t -e -mandoc -Tlatin1 fence_node.8 | less'
 
-\fBNAME\fP
-.in +7
+.TH fence_node 8
+
+.SH NAME
 fence_node - A program which performs I/O fencing on a single node.
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_node\fP [\fBoptions\fP] <\fBnode\fP>
-.sp
-.in
-\fBDESCRIPTION\fP
-.in +7
+.SH SYNOPSIS
+.B
+fence_node
+[\fIOPTION\fR]...
+
+.SH DESCRIPTION
 \fBfence_node\fP is a program which accumulates all the necessary information
 for I/O fencing a particular node and then performs the fencing action by
 issuing a call to the proper fencing agent.  \fBfence_node\fP gets the
 necessary information from the Cluster Configuration System (CCS).  CCS must
 be running and properly configured for \fBfence_node\fP to work properly.
-.in
 
-\fBOPTIONS\fP
-.in +7
+.SH OPTIONS
+.TP
 \fB-h\fP
-.in +7
 Help.  Print out the usage syntax.
-.sp
-.in
-
+.TP
 \fB-V\fP
-.in +7
 Print version information.
-.sp
-.in -7
-.in -7
-\fBEXAMPLES\fP
-.in +7
+
+.SH EXAMPLES
 To fence a node called ``bellerophon'':
-.in +7
 prompt> fence_node bellerophon
-.in -7
-.sp
-.in -7
-\fBSEE ALSO\fP
-.in +7
+
+.SH SEE ALSO
 fence(8), ccs(7)
=== man/fence_rackswitch.8
==================================================================
--- man/fence_rackswitch.8  (revision 317)
+++ man/fence_rackswitch.8  (local)
@@ -5,102 +5,65 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_rackswitch(8)''fence_rackswitch(8)'
+.TH fence_rackswitch 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_rackswitch - I/O Fencing agent for RackSaver RackSwitch
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_rackswitch -a\fP \fIIPaddress\fR \fB-p\fP \fIpassword\fR \fB-l\fP \fIusername\fR \fB-n\fP \fIplug\fR 
+.SH SYNOPSIS
+.B
+fence_rackswitch
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_rackswitch is an I/O Fencing agent which can be used with the RackSaver 
 RackSwitch.  It logs into the RackSwitch and boots a specified plug.
 Using the http interface to the RackSwitch should be avoided while a GFS cluster is 
 running because the connection may interfere with the operation of this agent.
-.sp
+
 fence_rackswitch accepts options on the command line as well as from stdin.  
 fenced sends the options through stdin when it execs the agent.  fence_rackswitch 
 can be run by itself with command line options which is useful for testing.
-.sp
-.in 
-\fBOPTIONS\fP
-.in 
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fP
-.in +7
 IP address of the switch.
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.in
-.sp
+.TP
 \fB-n\fP \fIplug\fP
-.in +7
 The plug number to power cycle.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fP
-.in +7
 Password for login.
-.sp
-.in
-.sp
+.TP
 \fB-l\fP \fIusername\fP
-.in +7
 Username for login.
-.in
-.sp
+.TP
 \fB-q\fP
-.in +7
 Quiet operation.  Only print out error messages.
-.in
-.sp
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.in
-.sp
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
-\fI agent = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_rackswitch.
-.sp
-
+.TP
 \fIipaddr = < ip >\fR
-.sp
 IP address of the switch.
-.sp
-
-\fI username = < param >\fR
-.sp
+.TP
+\fIusername = < param >\fR
 Username for login.
-.sp
-
-\fI password = < param >\fR
-.sp
+.TP
+\fIpassword = < param >\fR
 Password for login.
-.sp
-
-\fI port = < param >\fR
-.sp
+.TP
+\fIport = < param >\fR
 The port (outlet) number to act upon.
-.sp
 
-.in
-.sp
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_rib.8
==================================================================
--- man/fence_rib.8  (revision 317)
+++ man/fence_rib.8  (local)
@@ -5,21 +5,13 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_rib(8)''fence_rib(8)'
+.TH fence_rib 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_rib - I/O Fencing agent for Compaq Remote Insight Lights Out card
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
-.sp
+.SH DESCRIPTION
 fence_rib is deprecated.  fence_ilo should be used instead
-.sp
-.in
 
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence_ilo(8)
=== man/fence_sanbox2.8
==================================================================
--- man/fence_sanbox2.8  (revision 317)
+++ man/fence_sanbox2.8  (local)
@@ -5,118 +5,79 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_sanbox2(8)''fence_sanbox2(8)'
+.TH fence_sanbox2 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_sanbox2 - I/O Fencing agent for QLogic SANBox2 FC switches
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_sanbox2 -a\fP \fIIPaddress\fR \fB-l\fP \fIlogin\fR \fB-p\fP \fIpassword\fR \fB-n\fP \fIport\fR \fB-o\fP \fIaction\fR
+.SH SYNOPSIS
+.B
+fence_sanbox2
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_sanbox2 is an I/O Fencing agent which can be used with QLogic SANBox2 FC 
 switches.  It logs into a SANBox2 switch via telnet and disables a specified 
 port.  Disabling the port which a machine is connected to effectively fences 
 that machine.  Lengthy telnet connections to the switch should be avoided 
 while a GFS cluster is running because the connection will block any necessary 
 fencing actions.
-.sp
+
 fence_sanbox2 accepts options on the command line as well as from stdin.
 fenced sends parameters through stdin when it execs the agent.  fence_sanbox2 
 can be run by itself with command line options which is useful for testing.
-.sp
+
 After a fence operation has taken place the fenced machine can no longer connect
 to the switch.  When the fenced machine is ready to be brought back 
 into the GFS cluster (after reboot) the port on the FC switch needs to 
 be enabled. This can be done by running fence_sanbox2 and specifying the 
 enable action.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fP
-.in +7 
 IP address of the switch.
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-l\fP \fIlogin\fP
-.in +7
 Login name for the switch.
-.sp
-.in
+.TP
 \fB-n\fP \fIport\fP
-.in +7
 The port number to disable on the switch.
-.in
-.sp
+.TP
 \fB-o\fP \fIaction\fP
-.in +7
 The action required.  disable (default) or enable.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fP
-.in +7
 Password for login.
-.sp
-.in
+.TP
 \fB-q\fP
-.in +7
 Quiet mode: print only error messages.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
-\fI agent = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_sanbox2.
-.sp
-
+.TP
 \fIipaddr = < hostname | ip >\fR
-.sp
 IP address or hostname of the switch.
-.sp
-
-\fI login = < param >\fR
-.sp
+.TP
+\fIlogin = < param >\fR
 Login name.
-.sp
-
-\fI option = < param >\fR
-.sp
+.TP
+\fIoption = < param >\fR
 The action required.  disable (default) or enable.
-.sp
-
-\fI passwd = < param >\fR
-.sp
+.TP
+\fIpasswd = < param >\fR
 Password for login.
-.sp
-
-\fI port = < param >\fR
-.sp
+.TP
+\fIport = < param >\fR
 The port number to disable on the switch.
-.sp
 
-
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_tool.8
==================================================================
--- man/fence_tool.8  (revision 317)
+++ man/fence_tool.8  (local)
@@ -4,21 +4,19 @@
 .\"  This copyrighted material is made available to anyone wishing to use,
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
-.tl 'fence_tool(8)''fence_tool(8)'
-'\"     View with 'groff -t -e -mandoc -Tlatin1 fence_tool.8 | less'
 
-\fBNAME\fP
-.in +7
+.TH fence_tool 8
+
+.SH NAME
 fence_tool - A program to join and leave the fence domain
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_tool\fP <\fBjoin | leave\fP> [\fBoptions\fP]
-.sp
-.in
-\fBDESCRIPTION\fP
-.in +7
+.SH SYNOPSIS
+.B
+fence_tool
+<\fBjoin | leave\fP> 
+[\fIOPTION\fR]...
+
+.SH DESCRIPTION
 \fBfence_tool\fP is a program used to join or leave the default fence
 domain.  Specifically, it starts the fence daemon (fenced) to join the
 domain and kills fenced to leave the domain.  Fenced can be started
@@ -42,54 +40,29 @@
 
 A node must not leave the fence domain (fenced must not be terminated)
 while CLVM or GFS are in use.
-.in
 
-\fBOPTIONS\fP
-
-.in +7
-
+.SH OPTIONS
+.TP
 \fB-h\fP
-.in +7
 Help.  Print out the usage syntax.
-.sp
-.in
-
+.TP
 \fB-V\fP
-.in +7
 Print version information.
-.sp
-.in
-
+.TP
 \fB-S\fP
-.in +7
 Skip self unfencing before joining.
-.sp
-.in
-
+.TP
 \fB-D\fP
-.in +7
 Enable debugging output and don't fork (also passed to fenced)
-.sp
-.in
-
+.TP
 \fB-j\fP \fIsecs\fP
-.in +7
 Post-join fencing delay (passed to fenced)
-.sp
-.in
-
+.TP
 \fB-f\fP \fIsecs\fP
-.in +7
 Post-fail fencing delay (passed to fenced)
-.sp
-.in
-
+.TP
 \fB-c\fP
-.in +7
 All nodes are in a clean state to start (passed to fenced)
-.sp
-.in -7
-.in -7
-\fBSEE ALSO\fP
-.in +7
+
+.SH SEE ALSO
 fenced(8), fence(8), fence_node(8)
=== man/fence_vixel.8
==================================================================
--- man/fence_vixel.8  (revision 317)
+++ man/fence_vixel.8  (local)
@@ -5,97 +5,67 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_vixel(8)''fence_vixel(8)'
+.TH fence_vixel 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_vixel - I/O Fencing agent for Vixel FC switches
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_vixel [-hV] -a\fP \fIIPaddress\fR \fB-p\fP \fIpassword\fR \fB-n\fP \fIport\fR
+.SH SYNOPSIS
+.B
+fence_vixel
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_vixel is an I/O Fencing agent which can be used with Vixel FC switches.
 It logs into a Vixel switch via telnet and removes the specified port from the
 zone.  Removing the zone access from the port disables the port from being able
 to access the storage.  
-.sp
+
 fence_vixel accepts options on the command line as well as from stdin.
 fenced sends parameters through stdin when it execs the agent.  fence_vixel 
 can be run by itself with command line options which is useful for testing.
-.sp
+
 After a fence operation has taken place the fenced machine can no longer 
 connect to the Vixel FC switch.  When the fenced machine is ready to be brought
 back into the GFS cluster (after reboot) the port on the Vixel FC switch needs 
 to be enabled. In order to do this, log into the Vixel FC switch. Then go to:
-.in
-.in +7
+
 config->zones->config <port> <comma-separated-list-of-ports-in-the-zone>
-.in
-.in +7
+
 Then apply
-.sp
+
 Consult the Vixel manual for details
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fP
-.in +7
 IP address of the switch.
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-n\fP \fIport\fP
-.in +7
 The port number to remove zoning from on the switch.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fP
-.in +7
 Password for login.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
+.SH STDIN PARAMETERS
+.TP
 \fIagent = < param >\fR
-.sp
 This option is used by fence_node(8) and is ignored by fence_vixel.
-.sp
-
+.TP
 \fIipaddr = < hostname | ip >\fR
-.sp
 IP address or hostname of the switch.
-.sp
-
+.TP
 \fIpasswd = < param >\fR
-.sp
 Password for login.
-.sp
-
+.TP
 \fIport = < param >\fR
-.sp
 The port number to remove zoning from on the switch.
-.sp
 
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH BSEE ALSO
 fence(8), fence_node(8)
=== man/fence_wti.8
==================================================================
--- man/fence_wti.8  (revision 317)
+++ man/fence_wti.8  (local)
@@ -5,99 +5,65 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_wti(8)''fence_wti(8)'
+.TH fence_wti 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_wti - I/O Fencing agent for WTI Network Power Switch
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_wti -a\fP \fIIPaddress\fR \fB-p\fP \fIpassword\fR \fB-n\fP \fIplug\fR [\fB-T\fP]
+.SH SYNOPSIS
+.B
+fence_wti
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_wti is an I/O Fencing agent which can be used with the WTI Network 
 Power Switch (NPS).  It logs into an NPS via telnet and boots a specified plug.
 Lengthy telnet connections to the NPS should be avoided while a GFS cluster is 
 running because the connection will block any necessary fencing actions.
-.sp
+
 fence_wti accepts options on the command line as well as from stdin.  
 fenced sends the options through stdin when it execs the agent.  fence_wti 
 can be run by itself with command line options which is useful for testing.
-.sp
-.in 
-\fBOPTIONS\fP
-.in 
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fP
-.in +7
 IP address of the switch.
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.in
-.sp
+.TP
 \fB-n\fP \fIplug\fP
-.in +7
 The plug number to power cycle.
-.in
-.sp
+.TP
 \fB-p\fP \fIpassword\fP
-.in +7
 Password for login.
-.sp
-.in
+.TP
 \fB-T\fP
-.in +7
 Test only.  Do not power cycle.  Reports state of the plug.
-.in
-.sp
+.TP
 \fB-q\fP
-.in +7
 Quiet operation.  Only print out error messages.
-.in
-.sp
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.in
-.sp
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
-\fI agent = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_wti.
-.sp
-
+.TP
 \fIipaddr = < hostname | ip >\fR
-.sp
 IP address or hostname of the switch.
-.sp
-
-\fI passwd = < param >\fR
-.sp
+.TP
+\fIpasswd = < param >\fR
 Password for login.
-.sp
-
-\fI port = < param >\fR
-.sp
+.TP
+\fIport = < param >\fR
 The outlet number to act upon.
-.sp
-
-\fI test = < param >\fR
-.sp
+.TP
+\fItest = < param >\fR
 Test only.  Answer NO to the confirmation prompt instead of YES.
-.sp
 
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8)
=== man/fence_xcat.8
==================================================================
--- man/fence_xcat.8  (revision 317)
+++ man/fence_xcat.8  (local)
@@ -1,94 +1,63 @@
 .\"  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
 
-.tl 'fence_xcat(8)''fence_xcat(8)'
+.TH fence_xcat 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_xcat - I/O Fencing agent for xcat environments
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_xcat -n\fP \fInodename\fR \fB -o\fP \fIaction\fR \fB -r\fP \fIrpower\fR 
+.SH SYNOPSIS
+.B
+fence_xcat
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_xcat is a wrapper to the rpower(1) command that is distributed
 with the xCAT project available at http://www.xcat.org.  Use of 
 fence_xcat requires that xcat has already been properlly configfured
 for your environment.  Refer to xCAT(1) for more information on 
 configuring xCAT.
-.sp
+
 fence_xcat accepts options on the command line as well as from stdin.
 fenced sends parameters through stdin when it execs the agent.  fence_xcat 
 can be run by itself with command line options which is useful for testing.
-.sp
+
 NOTE: It is recommended that fence_bladecenter(8) is used instead of fence_xcat if
 the bladecenter firmware supports telnet.  This interface is much cleaner and
 easier to setup.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-n\fP \fInodename\fP
-.in +7
 The nodename as defined in nodelist.tab of the xCAT setup.
-.in
-.sp
+.TP
 \fB-o\fP \fIaction\fP
-.in +7
 The action required.  on, off, reset (default) or stat.
-.in
-.sp
+.TP
 \fB-r\fP \fIrpower\fP
-.in +7
 The path to the rpower binary.
-.sp
-.in
+.TP
 \fB-q\fP
-.in +7
 Quiet mode: print only error messages.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
 
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
-
-\fI agent = < param >\fR
-.sp
+.SH STDIN PARAMETERS
+.TP
+\fIagent = < param >\fR
 This option is used by fence_node(8) and is ignored by fence_xcat.
-.sp
-
-\fI nodename = < param >\fR
-.sp
+.TP
+\fInodename = < param >\fR
 The nodename as defined in nodelist.tab of the xCAT setup.
-.sp
-
-\fI action = < param >\fR
-.sp
+.TP
+\fIaction = < param >\fR
 The action required.  on, off, reset (default) or stat.
-.sp
-
-\fI rpower = < param >\fR
-.sp
+.TP
+\fIrpower = < param >\fR
 The path to the rpower binary.
-.sp
 
-
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fence_node(8), fence_bladecenter(8), nodelist.tab(8), rpower(1), xCAT(1)
=== man/fence_zvm.8
==================================================================
--- man/fence_zvm.8  (revision 317)
+++ man/fence_zvm.8  (local)
@@ -5,89 +5,59 @@
 .\"  modify, copy, or redistribute it subject to the terms and conditions
 .\"  of the GNU General Public License v.2.
 
-.tl 'fence_zvm(8)''fence_zvm(8)'
+.TH fence_zvm 8
 
-\fBNAME\fP
-.in +7
+.SH NAME
 fence_zvm - I/O Fencing agent for GFS on s390 and zSeries VM clusters
 
-.in
-\fBSYNOPSIS\fP
-.in +7
-\fBfence_zvm -a\fP \fIIPaddress\fP \fB-u\fP \fIuserid\fP \fB-p\fP \fIpassword\fP
+.SH SYNOPSIS
+.B
+fence_zvm
+[\fIOPTION\fR]...
 
-.in
-.sp
-\fBDESCRIPTION\fP
-.in +7
+.SH DESCRIPTION
 fence_zvm is an I/O Fencing agent used on a GFS virtual machine in a s390 or zSeries VM cluster.
 It uses the s3270 program to log the specified virtual machine out of VM.
 For fence_zvm to execute correctly, you must have s3270 in your PATH.
 
-.sp
 fence_zvm accepts options on the command line as well as from stdin.
 fence_node sends the options through stdin when it execs the agent.
 fence_zvm can be run by itself with command line options which is useful
 for testing.
-.sp
-.in
-\fBOPTIONS\fP
-.in
+
+.SH OPTIONS
+.TP
 \fB-a\fP \fIIPaddress\fP
-.in +7
 IP address or hostname of the Physical machine (required).
-.sp
-.in
+.TP
 \fB-h\fP
-.in +7
 Print out a help message describing available options, then exit.
-.sp
-.in
+.TP
 \fB-u\fP \fIuserid\fP
-.in +7
 userid of the virtual machine to fence (required).
-.sp
-.in
+.TP
 \fB-p\fP \fIpassword\fP
-.in +7
 password of the virtual machine to fence (required).
-.sp
-.in
+.TP
 \fB-q\fP
-.in +7
 quiet mode, no output.
-.sp
-.in
+.TP
 \fB-V\fP
-.in +7
 Print out a version message, then exit.
-.sp
-.in
-.in -7
-\fBSTDIN PARAMETERS\fP
-.in
 
+.SH STDIN PARAMETERS
+.TP
 \fIagent = < param >\fP
-.sp
 This option is used by fence_node(8) and is ignored by fence_zvm.
-.sp
-
+.TP
 \fIipaddr = < hostname | ip >\fP
-.sp
 IP address or hostname of the Physical machine (required).
-.sp
-
+.TP
 \fIpasswd = < param >\fP
-.sp
 password of the virtual machine to fence (required).
-.sp
-
+.TP
 \fIuserid = < param >\fP
-.sp
 userid of the virtual machine to fence (required).
-.sp
 
-.in -7
-\fBSEE ALSO\fP
-.in +7
+.SH SEE ALSO
 fence(8), fenced(8), fence_node(8)

Attachment: signature.asc
Description: Digital signature


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]