[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] fence_sanbox2 configuration example?



On Tue, May 31, 2005 at 06:17:15PM -0400, Dan B. Phung wrote:
> Can somebody who's using the fence_sanbox2 agent let me take a peek at 
> their config?  
> 
> here's what I have so far for fencedevices:
>    <fencedevices>
>    <fencedevice name="human" agent="fence_manual"/>
>       <fencedevice name="san" agent="fence_sanbox2"
>          ipaddr="fsm.cs.columbia.edu" login="foo" passwd="bar"/>
>    </fencedevices>

that looks right

> is the port indicated in the manpage the WWN for the host bus adaptor?
> 
>        -n port
>               The port number to disable on the switch.

It's usually the physical port number, e.g. if you have a 16 port switch
you'd have ports 1-16.

> here's what I think I should have in each clusternode entry:
>              <fence>
>                <method name="fibre">
>                  <device name="san" port="2100000d55d32ced"/>

more like port="1" if this node is plugged into the first port

Dave


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]