[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Linux-cluster] Re: How do I use a cross over cable to set up quorum?



Sorry, I forgot to mention that I am running Centos 3.5 which is
equivalent to RHEL AS 3.5.

A working cluster.xml using the main network interface is attached

Andres

On 9/22/05, Andreso <andreseso gmail com> wrote:
> Hello,
>
> I am trying to set up a cluster with clumanager-1.2.3-1 and
> clumanager-1.2.3-1 and my boss desires a working quorum where the two
> members of the cluster use a cross over cable to interchange the
> necessary information for quorum between the two cluster members.  The
> reason is that the company uses faulty switches so he considers using
> the main network interfaces of the servers not acceptable.
>
> I would like to know how I can obtain cluster quorum using the cross
> over cable.  I have succesfully set up the cluster using the main
> network interface but I have failed miserably setting up the cluster
> quorum over the cross over cable network interface.  I believe I have
> a routing problem.
>
> The route -n information for the cross over cable interface is
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> 10.0.0.0        0.0.0.0         255.255.255.0   U     0      0        0 eth1
>
> I am far from being a linux expert and in some things like clusters I
> am a newbie and I am not particularily strong on networking.  For
> example until I started setting up the cluster I had never heard of
> the concepts tiebreaker IP or Multicast IP address.
>
> Any help would be appreciated.
>
> If somebody has managed to make this work could they please post their
> cluster.xml file?
>

Attachment: cluster.xml-funciona
Description: Binary data


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]