[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Linux-cluster] Cluster cannot failover



Hi,

I am installing Redhat Cluster Suite in 2 HP Proliant DL380G4 with HP StorageWorks MSA500 G1.

I have 3 ethernet cards for each server. 1 card is used for heartbeat and 2 cards are configured as bond0 (bonding).

I have setup a service and the service runs on both node: node1 and node2. I can swing the service from node1 to node2.

However, when I shutdown node1 (using shutdown -h now), the service which was running in node1 is not restarted on node2.
I got the following error message in node2:

Sep 27 10:34:54 ppba-papp2 clusvcmgrd[1868]: <crit> Couldn't connect to member #0: Connection timed out
Sep 27 10:34:54 ppba-papp2 clusvcmgrd[1868]: <err> Unable to obtain cluster lock: No locks available
Sep 27 10:35:01 ppba-papp2 cluquorumd[1835]: <warning> Membership reports #0 as down, but disk reports as up: State uncertain!
Sep 27 10:35:05 ppba-papp2 clusvcmgrd[1868]: <warning> Member ppba-papp1's state is uncertain: Some services may be unavailable!

Is this test scenario valid ? Is it ok to test the Redhat Cluster by shutting down the server ? What could have gone wrong ?

Thanks.
Hanny

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]