[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] [OT] Serial Connection to MSA1000



Did you try 9600 baud?

Seems like all the Dec, I mean Compaq, I mean HP storage uses 9600 not 19200.

I don't know what the HP stuff uses that is not from the old Dec
storageworks line.

On 4/12/06, Steve Nelson <sanelson gmail com> wrote:
> Hi All,
>
> I'm assuming that most of us on this list have used HP MSA kit, so
> excuse me a slightly off-topic question!
>
> I've got a cluster connected to an MSA1000, but want to make some
> changes on the MSA1000 itself.
>
> I've got a dumb terminal that runs procom, but its pretty horrid, so
> I've connected the controller direct to the serial port of one of the
> linux machines to use minicom.
>
> As per HP's documentation, I've set it up as:
>
> pr port             /dev/ttyS0
> pu baudrate         19200
> pu bits             8
> pu parity           N
> pu stopbits         1
>
> However, I get no response.
>
> Any ideas on how to troubleshoot?  Anyone got this working?
>
> S.
>
> --
> Linux-cluster mailing list
> Linux-cluster redhat com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>


--
Greg Freemyer
The Norcross Group
Forensics for the 21st Century


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]