[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Linux-cluster] Re: CS4 Update 2 / GUI problem ?



Thanks Jim, it was effectively the problem : the second step
about managing the fence for each node was missing (but there
is nothing in documentation about this step and dialog boxes ...)

Another problem/question:
when you have finished the 3 nodes cluster configuration,
and Save the file in /etc/cluster/cluster.conf on local node,
the Icon "Send to Cluster" is not available because the
cs4 is not active at the moment. But with three nodes,
even if you try to start the cs4 on this local node (where
I've done the configuration) , it can't start alone because
the cluster is not quorate ... and you can't start cman
on other nodes, it seems that the start is failed because
of no cluster.conf currently on the node.

So, do we have to do manually the mkdir /etc/cluster on
both other nodes, and scp of cluster.conf towards both nodes ?
Or is there another tip via GUI to start the cs4 on three
nodes despite two nodes have not yet any cluster.conf available ?

Thanks
Alain Moullé





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]